commit 3c92cca3cda0d72c11c41bc0b07edcff127cf194
author Jagan Teki <jagan@amarulasolutions.com> Sun Aug 05 00:40:07 2018 +0530
committer Jagan Teki <jagan@amarulasolutions.com> Fri Sep 28 22:09:24 2018 +0530
tree 4c9b1428d591c1f6baf0d999e4f2460a2073400a
parent bbef20d479441b01d62252cf127498c58078b2c3

ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3

Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3
with below commit:
commit 590b0c0cfc6162aeebbf43eaafb9753b56df1532
Author: Pascal Roeleven <dev@pascalroeleven.nl>
Date:   Fri Apr 20 12:21:12 2018 +0200

    ARM: dts: sun4i: Fix incorrect clocks for displays

Note: Update pinctrl-0 for sun4i-a10-inet-3f.dts, sun4i-a10-inet-3w.dts
like other dts file since there dts file are U-Boot specific.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

arch/arm/dts/sun4i-a10-ba10-tvbox.dts

diff --git a/arch/arm/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/dts/sun4i-a10-ba10-tvbox.dts
index f3cb297..38a2c41 100644
--- a/arch/arm/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/dts/sun4i-a10-ba10-tvbox.dts
@@ -68,8 +68,6 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
 	phy = <&phy1>;
 	status = "okay";
 };
@@ -79,8 +77,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -95,7 +91,7 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins>;
 	status = "okay";
 };
 
@@ -108,12 +104,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -121,20 +114,10 @@
 	status = "okay";
 };
 
-&ohci1 {
-	status = "okay";
-};
-
 &otg_sram {
 	status = "okay";
 };
 
-&pio {
-	usb2_vbus_pin_a: usb2_vbus_pin@0 {
-		allwinner,pins = "PH12";
-	};
-};
-
 &reg_usb0_vbus {
 	regulator-boot-on;
 	status = "okay";
@@ -151,7 +134,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };