commit 3c92cca3cda0d72c11c41bc0b07edcff127cf194
author Jagan Teki <jagan@amarulasolutions.com> Sun Aug 05 00:40:07 2018 +0530
committer Jagan Teki <jagan@amarulasolutions.com> Fri Sep 28 22:09:24 2018 +0530
tree 4c9b1428d591c1f6baf0d999e4f2460a2073400a
parent bbef20d479441b01d62252cf127498c58078b2c3

ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3

Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3
with below commit:
commit 590b0c0cfc6162aeebbf43eaafb9753b56df1532
Author: Pascal Roeleven <dev@pascalroeleven.nl>
Date:   Fri Apr 20 12:21:12 2018 +0200

    ARM: dts: sun4i: Fix incorrect clocks for displays

Note: Update pinctrl-0 for sun4i-a10-inet-3f.dts, sun4i-a10-inet-3w.dts
like other dts file since there dts file are U-Boot specific.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

arch/arm/dts/sun4i-a10-cubieboard.dts

diff --git a/arch/arm/dts/sun4i-a10-cubieboard.dts b/arch/arm/dts/sun4i-a10-cubieboard.dts
index 710e2ef..197a1f2 100644
--- a/arch/arm/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/dts/sun4i-a10-cubieboard.dts
@@ -46,7 +46,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Cubietech Cubieboard";
@@ -60,6 +59,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -91,6 +101,10 @@
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -100,8 +114,6 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
 	phy = <&phy1>;
 	status = "okay";
 };
@@ -110,9 +122,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -122,14 +142,12 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins>;
 	status = "okay";
 };
 
@@ -142,12 +160,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -164,18 +179,16 @@
 };
 
 &pio {
-	led_pins_cubieboard: led_pins@0 {
-		allwinner,pins = "PH20", "PH21";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	led_pins_cubieboard: led-pins {
+		pins = "PH20", "PH21";
+		function = "gpio_out";
+		drive-strength = <20>;
 	};
 
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		allwinner,pins = "PH4";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	usb0_id_detect_pin: usb0-id-detect-pin {
+		pins = "PH4";
+		function = "gpio_in";
+		bias-pull-up;
 	};
 };
 
@@ -185,6 +198,10 @@
 
 #include "axp209.dtsi"
 
+&ac_power_supply {
+	status = "okay";
+};
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -220,14 +237,14 @@
 
 &spi0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>,
-		    <&spi0_cs0_pins_a>;
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };