AT91: Enable PLLB for USB
At least some (old ?) versions of the AT91Bootstrap do not set up the
PLLB correctly to 48 MHz in order to make USB host function correctly.
This patch sets up the PLLB to the same values Linux uses, and makes USB
work ok on the following CPUs:
- AT91CAP9
- AT91SAM9260
- AT91SAM9263
This patch also defines CONFIG_USB_STORAGE and CONFIG_CMD_FAT for all
the relevant AT91CAP9/AT91SAM9 atmel boards.
Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/cpu/arm926ejs/at91/usb.c b/cpu/arm926ejs/at91/usb.c
index 7cb082d..2f5c337 100644
--- a/cpu/arm926ejs/at91/usb.c
+++ b/cpu/arm926ejs/at91/usb.c
@@ -31,6 +31,15 @@
int usb_cpu_init(void)
{
+
+#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
+ defined(CONFIG_AT91SAM9263)
+ /* Enable PLLB */
+ at91_sys_write(AT91_CKGR_PLLBR, CFG_AT91_PLLB);
+ while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
+ ;
+#endif
+
/* Enable USB host clock. */
at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP);
#ifdef CONFIG_AT91SAM9261
@@ -51,6 +60,15 @@
#else
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP);
#endif
+
+#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
+ defined(CONFIG_AT91SAM9263)
+ /* Disable PLLB */
+ at91_sys_write(AT91_CKGR_PLLBR, 0);
+ while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != 0)
+ ;
+#endif
+
return 0;
}