* Patch by Arun Dharankar, 4 Apr 2003:
Add IDMA example code (tested on 8260 only)
* Add support for Purple Board (MIPS64 5Kc)
* Add support for MIPS64 5Kc CPUs
* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
* Patch by Denis Peter, 04 Apr 2003:
- update MIP405-4 board
* Patches by Denis Peter, 03 April 2003:
- fix PCI IRQs on MPL boards
- fix two more un-relocated pointer problems
* Fix behaviour of "run" command:
- print error message iv variable does not exist
- terminate processing of arguments in case of error
* Patches by Peter Figuli, 10 Mar 2003
- Add support for BTUART on PXA platform
- Add support for WEP EP250 (PXA) board
* Fix flash problems on INCA-IP; add tool to allow bruning images to
flash using a BDI2000
* Implement fix for I2C Edge Conditions problem for all boards that
use the bit-banging driver (common/soft_i2c.c)
* Add patches by Robert Schwebel, 31 Mar 2003:
- csb226 board: bring in sync with innokom/memsetup.S
- csb226 board: fix MDREFR handling
- misc doc fixes / extensions
- innokom board: cleanup, MDREFR fix in memsetup.S, config update
- add BOOT_PROGRESS to armlinux.c
diff --git a/doc/README.idma2intr b/doc/README.idma2intr
new file mode 100644
index 0000000..1828b51
--- /dev/null
+++ b/doc/README.idma2intr
@@ -0,0 +1,10 @@
+(C) 2003 Arun Dharankar <ADharankar@ATTBI.Com>
+
+Attached is an IDMA example code for MPC8260/PPCBoot. I had tried to
+search around and could not find any for implementing IDMA, so
+implemented one. Its not coded in the best way, but works.
+
+Also, I was able to test the IDMA specific code under Linux also
+(with modifications). My requirement was to implement it for
+CompactFlash implemented in memory mode, and it works for it under
+PPCBoot and Linux.