Reduce line lengths to 80 characters max.
diff --git a/drivers/enc28j60.c b/drivers/enc28j60.c
old mode 100644
new mode 100755
index c2ed485..36b084c
--- a/drivers/enc28j60.c
+++ b/drivers/enc28j60.c
@@ -548,7 +548,10 @@
m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC);
/* taken from the Linux driver */
- /* Only odd values should be written to ERXRDPTL, see errata B4 pt.13 */ rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1;
+ /* Only odd values should be written to ERXRDPTL,
+ * see errata B4 pt.13
+ */
+ rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1;
if ((rxbuf_rdpt < (m_nic_read(CTL_REG_ERXSTH) << 8 |
m_nic_read(CTL_REG_ERXSTL))) || (rxbuf_rdpt >
(m_nic_read(CTL_REG_ERXNDH) << 8 |
@@ -799,13 +802,15 @@
/* enable MAC to receive frames */
/* added some bits from the Linux driver */
- m_nic_write_retry (CTL_REG_MACON1, (ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS), 10);
+ m_nic_write_retry (CTL_REG_MACON1
+ ,(ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS)
+ ,10);
/* configure pad, tx-crc and duplex */
/* added a bit from the Linux driver */
- m_nic_write_retry (CTL_REG_MACON3,
- (ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN),
- 10);
+ m_nic_write_retry (CTL_REG_MACON3
+ ,(ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN)
+ ,10);
/* added 4 new lines from the Linux driver */
/* Allow infinite deferals if the medium is continously busy */