arm: dts: k3-am65: Sync CPSW DT node from kernel
Sync CPSW DT node from kernel and move it out of -u-boot.dtsi file.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index 1a40fa1..d9ff3ed4 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -57,59 +57,6 @@
u-boot,dm-spl;
};
};
-
- mcu_conf: scm_conf@40f00000 {
- compatible = "syscon";
- reg = <0x0 0x40f00000 0x0 0x20000>;
- };
-
- mcu_cpsw: cpsw_nuss@046000000 {
- compatible = "ti,am654-cpsw-nuss";
- #address-cells = <2>;
- #size-cells = <2>;
- reg = <0x0 0x46000000 0x0 0x200000>;
- reg-names = "cpsw_nuss";
- ranges;
- dma-coherent;
- clocks = <&k3_clks 5 10>;
- clock-names = "fck";
- power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
-
- dmas = <&mcu_udmap 0xf000>,
- <&mcu_udmap 0xf001>,
- <&mcu_udmap 0xf002>,
- <&mcu_udmap 0xf003>,
- <&mcu_udmap 0xf004>,
- <&mcu_udmap 0xf005>,
- <&mcu_udmap 0xf006>,
- <&mcu_udmap 0xf007>,
- <&mcu_udmap 0x7000>;
- dma-names = "tx0", "tx1", "tx2", "tx3",
- "tx4", "tx5", "tx6", "tx7",
- "rx";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- host: host@0 {
- reg = <0>;
- ti,label = "host";
- };
-
- cpsw_port1: port@1 {
- reg = <1>;
- ti,mac-only;
- ti,label = "port1";
- ti,syscon-efuse = <&mcu_conf 0x200>;
- };
- };
-
- davinci_mdio: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- bus_freq = <1000000>;
- };
- };
};
&cbass_wakeup {
@@ -271,6 +218,7 @@
reg = <0x0 0x46000000 0x0 0x200000>,
<0x0 0x40f00200 0x0 0x2>;
reg-names = "cpsw_nuss", "mac_efuse";
+ /delete-property/ ranges;
cpsw-phy-sel@40f04040 {
compatible = "ti,am654-cpsw-phy-sel";