ARM: uniphier: add support for PH1-Pro4 Ace and Sanji boards
Initial commit for PH1-Pro4 Ace and Sanji boards.
Note:
There are two variants for the Ace board in terms of the amount of
DDR memory; 1GB or 2GB.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
diff --git a/arch/arm/dts/uniphier-ph1-pro4-ace.dts b/arch/arm/dts/uniphier-ph1-pro4-ace.dts
new file mode 100644
index 0000000..6e741ea
--- /dev/null
+++ b/arch/arm/dts/uniphier-ph1-pro4-ace.dts
@@ -0,0 +1,105 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 Ace Board
+ *
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+ X11
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-pro4.dtsi"
+
+/ {
+ model = "UniPhier PH1-Pro4 Ace Board";
+ compatible = "socionext,ph1-pro4-ace", "socionext,ph1-pro4";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ };
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom {
+ compatible = "24c64", "i2c-eeprom";
+ reg = <0x54>;
+ u-boot,i2c-offset-len = <2>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
+
+/* for U-Boot only */
+/ {
+ soc {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&serial0 {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart0 {
+ u-boot,dm-pre-reloc;
+};