Fix typo: commmand -> command.
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
diff --git a/doc/README.nand b/doc/README.nand
index 0ff5633..545d88c 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -94,7 +94,7 @@
address of u-boot MTD partition in NAND.
CONFIG_CMD_NAND
- Enables NAND support and commmands.
+ Enables NAND support and commands.
CONFIG_CMD_NAND_TORTURE
Enables the torture command (see description of this command below).
diff --git a/doc/README.update b/doc/README.update
index eab124c..d37f2c4 100644
--- a/doc/README.update
+++ b/doc/README.update
@@ -51,7 +51,7 @@
to be prepared. Refer to the doc/uImage.FIT/ directory for more details on FIT
images.
-This mechanism can be also triggered by the commmand "fitupd".
+This mechanism can be also triggered by the command "fitupd".
If an optional, non-zero address is provided as argument, the TFTP transfer
is skipped and the image at this address is used.
The fitupd command is enabled by CONFIG_CMD_FITUPD.
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index 1ad638e..734fdcc 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -818,7 +818,7 @@
if (!ataid[pccb->target]) {
printf("scsi_ahci: SCSI READ CAPACITY10 command failure. "
"\tNo ATA info!\n"
- "\tPlease run SCSI commmand INQUIRY firstly!\n");
+ "\tPlease run SCSI command INQUIRY firstly!\n");
return -EPERM;
}
@@ -847,7 +847,7 @@
if (!ataid[pccb->target]) {
printf("scsi_ahci: SCSI READ CAPACITY16 command failure. "
"\tNo ATA info!\n"
- "\tPlease run SCSI commmand INQUIRY firstly!\n");
+ "\tPlease run SCSI command INQUIRY firstly!\n");
return -EPERM;
}
diff --git a/drivers/block/fsl_sata.c b/drivers/block/fsl_sata.c
index 208a0ae..e000ebf 100644
--- a/drivers/block/fsl_sata.c
+++ b/drivers/block/fsl_sata.c
@@ -398,7 +398,7 @@
debug("attribute = %08x\n\r", val32);
cmd_hdr->attribute = cpu_to_le32(val32);
- /* Make sure cmd desc and cmd slot valid before commmand issue */
+ /* Make sure cmd desc and cmd slot valid before command issue */
sync();
/* PMP*/
diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index 8606151..828bc60 100644
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -57,7 +57,7 @@
#define ENABLE_JFFS 1
#endif
-/* Define which commmands should be available at u-boot command prompt */
+/* Define which commands should be available at u-boot command prompt */
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DATE