mips: Add support for SoM "VoCore2".
Small patch to add support for VoCore/VoCore2 board.
VoCore is open hardware and runs OpenWrt/LEDE.
It has WIFI, USB, UART, 20+ GPIOs but is only one inch square.
It will help you to make a smart house, study embedded system
or even make the tiniest router in the world.
Details about this SoM can be found at "https://vocore.io/v2.html".
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Stefan Roese <sr@denx.de>
diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
index cbd0c8b..f711e9f 100644
--- a/arch/mips/dts/Makefile
+++ b/arch/mips/dts/Makefile
@@ -23,6 +23,7 @@
dtb-$(CONFIG_BOARD_SAGEM_FAST1704) += sagem,f@st1704.dtb
dtb-$(CONFIG_BOARD_SFR_NB4_SER) += sfr,nb4-ser.dtb
dtb-$(CONFIG_BOARD_TPLINK_WDR4300) += tplink_wdr4300.dtb
+dtb-$(CONFIG_BOARD_VOCORE2) += vocore_vocore2.dtb
dtb-$(CONFIG_TARGET_JZ4780_CI20) += ci20.dtb
dtb-$(CONFIG_SOC_LUTON) += luton_pcb090.dtb luton_pcb091.dtb
dtb-$(CONFIG_SOC_OCELOT) += ocelot_pcb120.dtb ocelot_pcb123.dtb
diff --git a/arch/mips/dts/vocore_vocore2.dts b/arch/mips/dts/vocore_vocore2.dts
new file mode 100644
index 0000000..3502e4b
--- /dev/null
+++ b/arch/mips/dts/vocore_vocore2.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Mauro Condarelli <mc5686@mclink.it>
+ */
+
+/dts-v1/;
+
+#include "mt7628a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "vocore,vocore2", "ralink,mt7628a-soc";
+ model = "VoCore2";
+
+ aliases {
+ serial0 = &uart2;
+ spi0 = &spi0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "vocore:power";
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS2,115200";
+ stdout-path = &uart2;
+ };
+};
+
+&pinctrl {
+ state_default: pin_state {
+ p0led {
+ groups = "p0led_a";
+ function = "led";
+ };
+ };
+};
+
+&uart2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pwm_pins>;
+};
+
+&spi0 {
+ status = "okay";
+ nor0: spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <25000000>;
+ reg = <0>;
+ };
+};
+
+ð {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_iot_mode>;
+ mediatek,poll-link-phy = <0>;
+};
+
+&mmc {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <48000000>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_iot_mode>;
+};
diff --git a/arch/mips/mach-mtmips/Kconfig b/arch/mips/mach-mtmips/Kconfig
index 60cc0f8..737de2c 100644
--- a/arch/mips/mach-mtmips/Kconfig
+++ b/arch/mips/mach-mtmips/Kconfig
@@ -87,6 +87,15 @@
SPI-NOR flash, 1 built-in switch with 5 ports, 1 UART, 1 USB host,
1 SDXC, 1 PCIe socket and JTAG pins.
+config BOARD_VOCORE2
+ bool "VoCore2"
+ depends on SOC_MT7628
+ select SPL_SERIAL_SUPPORT
+ select SPL_UART2_SPIS_PINMUX
+ help
+ VoCore VoCore2 board has a MT7628 SoC with 128 MiB of RAM
+ and 16 MiB of flash (SPI).
+
endchoice
config SPL_UART2_SPIS_PINMUX
@@ -100,5 +109,6 @@
source "board/gardena/smart-gateway-mt7688/Kconfig"
source "board/mediatek/mt7628/Kconfig"
source "board/seeed/linkit-smart-7688/Kconfig"
+source "board/vocore/vocore2/Kconfig"
endmenu