| menu "Tools options" |
| |
| config MKIMAGE_DTC_PATH |
| string "Path to dtc binary for use within mkimage" |
| default "dtc" |
| help |
| The mkimage host tool will, in order to generate FIT images make |
| calls to the dtc application in order to create the output. In |
| some cases the system dtc may not support all required features |
| and the path to a different version should be given here. |
| |
| config TOOLS_CRC32 |
| def_bool y |
| help |
| Enable CRC32 support in the tools builds |
| |
| config TOOLS_LIBCRYPTO |
| bool "Use OpenSSL's libcrypto library for host tools" |
| default y |
| help |
| Cryptographic signature, verification, and encryption of images is |
| provided by host tools using OpenSSL's libcrypto. Select 'n' here if |
| you wish to build host tools without OpenSSL. mkimage will not have |
| the ability to sign images. |
| This selection does not affect target features, such as runtime FIT |
| signature verification. |
| |
| config TOOLS_KWBIMAGE |
| bool "Enable kwbimage support in host tools" |
| default y |
| select TOOLS_LIBCRYPTO |
| |
| config TOOLS_FIT |
| def_bool y |
| help |
| Enable FIT support in the tools builds. |
| |
| config TOOLS_FIT_FULL_CHECK |
| def_bool y |
| help |
| Do a full check of the FIT before using it in the tools builds |
| |
| config TOOLS_FIT_PRINT |
| def_bool y |
| help |
| Print the content of the FIT verbosely in the tools builds |
| |
| config TOOLS_FIT_RSASSA_PSS |
| def_bool y |
| help |
| Support the rsassa-pss signature scheme in the tools builds |
| |
| config TOOLS_FIT_SIGNATURE |
| depends on TOOLS_LIBCRYPTO |
| def_bool y |
| help |
| Enable signature verification of FIT uImages in the tools builds |
| |
| config TOOLS_FIT_SIGNATURE_MAX_SIZE |
| hex |
| depends on TOOLS_FIT_SIGNATURE |
| default 0x10000000 |
| |
| config TOOLS_FIT_VERBOSE |
| def_bool y |
| help |
| Support verbose FIT output in the tools builds |
| |
| config TOOLS_MD5 |
| def_bool y |
| help |
| Enable MD5 support in the tools builds |
| |
| config TOOLS_OF_LIBFDT |
| def_bool y |
| help |
| Enable libfdt support in the tools builds |
| |
| config TOOLS_SHA1 |
| def_bool y |
| help |
| Enable SHA1 support in the tools builds |
| |
| config TOOLS_SHA256 |
| def_bool y |
| help |
| Enable SHA256 support in the tools builds |
| |
| config TOOLS_SHA384 |
| def_bool y |
| help |
| Enable SHA384 support in the tools builds |
| |
| config TOOLS_SHA512 |
| def_bool y |
| help |
| Enable SHA512 support in the tools builds |
| |
| config TOOLS_MKEFICAPSULE |
| bool "Build efimkcapsule command" |
| default y if EFI_CAPSULE_ON_DISK |
| help |
| This command allows users to create a UEFI capsule file and, |
| optionally sign that file. If you want to enable UEFI capsule |
| update feature on your target, you certainly need this. |
| |
| menuconfig FSPI_CONF_HEADER |
| bool "FlexSPI Header Configuration" |
| help |
| FSPI Header Configuration |
| |
| config FSPI_CONF_FILE |
| string "FlexSPI Header File" |
| depends on FSPI_CONF_HEADER |
| help |
| FlexSPI Header File name |
| |
| config READ_CLK_SOURCE |
| hex "Sampling Clock Source" |
| default 0x00 |
| depends on FSPI_CONF_HEADER |
| help |
| Sample Clock source for Flash, default is internal loopback clock |
| |
| config DEVICE_TYPE |
| hex "Flash Type" |
| default 0x01 |
| depends on FSPI_CONF_HEADER |
| help |
| Flash type: Serial NOR (0X01) and Serial NAND (0x02) |
| |
| config FLASH_PAD_TYPE |
| hex "Flash Pad Type" |
| default 0x01 |
| depends on FSPI_CONF_HEADER |
| help |
| Flash Pad type : |
| Single Pad 0x01 |
| Dual Pads 0x02 |
| Quad Pad 0x04 |
| Octal Pad 0x08 |
| |
| config SERIAL_CLK_FREQUENCY |
| hex "Serial Clock Frequency" |
| default 0x02 |
| depends on FSPI_CONF_HEADER |
| help |
| Chip specific frequency: other value 30MHz |
| 1-30MHz 2-50MHz 3-60MHz 4-75MHz 5-80MHz 6-100MHz 7-133MHz 8-166MHz |
| |
| config LUT_CUSTOM_SEQUENCE |
| hex "Enable Custom Look Up Table(LUT) Sequence" |
| default 0x00 |
| depends on FSPI_CONF_HEADER |
| help |
| 0 - Use predefined LUT Sequence |
| 1 - Use LUT Sequence provided |
| |
| config LUT_SEQUENCE |
| string "Look Up Table Sequence" |
| default "0x0b, 0x04, 0x18, 0x08, 0x08, 0x30, 0x04, 0x24" |
| depends on FSPI_CONF_HEADER |
| help |
| Look Up Table Sequence |
| |
| config TOOLS_MKFWUMDATA |
| bool "Build mkfwumdata command" |
| default y if FWU_MULTI_BANK_UPDATE |
| help |
| This command allows users to create a raw image of the FWU |
| metadata for initial installation of the FWU multi bank |
| update on the board. The installation method depends on |
| the platform. |
| |
| endmenu |