mx7d: Add Storopack's SMEGW01 board
Add support for Storopack's SMEGW01 board, which is an
IoT gateway based on the i.MX7D SoC.
Based on the original U-Boot work done by Phytec.
Signed-off-by: Fabio Estevam <festevam@denx.de>
diff --git a/include/configs/smegw01.h b/include/configs/smegw01.h
new file mode 100644
index 0000000..50f0013
--- /dev/null
+++ b/include/configs/smegw01.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 NXP Semiconductors
+ * Copyright (C) 2021 Fabio Estevam <festevam@denx.de>
+ *
+ * Configuration settings for the smegw01 board.
+ */
+
+#ifndef __SMEGW01_CONFIG_H
+#define __SMEGW01_CONFIG_H
+
+#include "mx7_common.h"
+#include <imximage.h>
+
+#define PHYS_SDRAM_SIZE SZ_512M
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M)
+
+/* MMC Config*/
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "image=zImage\0" \
+ "console=ttymxc0\0" \
+ "fdtfile=imx7d-smegw01.dtb\0" \
+ "fdt_addr=0x83000000\0" \
+ "bootm_size=0x10000000\0" \
+ "mmcdev=0\0" \
+ "mmcpart=1\0" \
+ "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "if run loadfdt; then " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "fi;\0" \
+
+#define CONFIG_BOOTCOMMAND \
+ "if run loadimage; then " \
+ "run mmcboot; " \
+ "fi; " \
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_SYS_HZ 1000
+
+/* Physical Memory Map */
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#endif