blob: 5dfcde8774700b4b2fdd8319003f92bcf07394ec [file] [log] [blame]
/*
* (C) Copyright 2000
* Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
*
* (C) Copyright 2004
* ARM Ltd.
* Philippe Robin, <philippe.robin@arm.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/* Simple U-Boot driver for the PrimeCell PL010/PL011 UARTs */
#include <common.h>
#include <watchdog.h>
#include <asm/io.h>
#include "serial_pl01x.h"
/*
* Integrator AP has two UARTs, we use the first one, at 38400-8-N-1
* Integrator CP has two UARTs, use the first one, at 38400-8-N-1
* Versatile PB has four UARTs.
*/
#define CONSOLE_PORT CONFIG_CONS_INDEX
static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS;
#define NUM_PORTS (sizeof(port)/sizeof(port[0]))
static void pl01x_putc (int portnum, char c);
static int pl01x_getc (int portnum);
static int pl01x_tstc (int portnum);
unsigned int baudrate = CONFIG_BAUDRATE;
DECLARE_GLOBAL_DATA_PTR;
static struct pl01x_regs *pl01x_get_regs(int portnum)
{
return (struct pl01x_regs *) port[portnum];
}
#ifdef CONFIG_PL010_SERIAL
int serial_init (void)
{
struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT);
unsigned int divisor;
/* First, disable everything */
writel(0, &regs->pl010_cr);
/* Set baud rate */
switch (baudrate) {
case 9600:
divisor = UART_PL010_BAUD_9600;
break;
case 19200:
divisor = UART_PL010_BAUD_9600;
break;
case 38400:
divisor = UART_PL010_BAUD_38400;
break;
case 57600:
divisor = UART_PL010_BAUD_57600;
break;
case 115200:
divisor = UART_PL010_BAUD_115200;
break;
default:
divisor = UART_PL010_BAUD_38400;
}
writel((divisor & 0xf00) >> 8, &regs->pl010_lcrm);
writel(divisor & 0xff, &regs->pl010_lcrl);
/* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
writel(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN, &regs->pl010_lcrh);
/* Finally, enable the UART */
writel(UART_PL010_CR_UARTEN, &regs->pl010_cr);
return 0;
}
#endif /* CONFIG_PL010_SERIAL */
#ifdef CONFIG_PL011_SERIAL
int serial_init (void)
{
struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT);
unsigned int temp;
unsigned int divider;
unsigned int remainder;
unsigned int fraction;
/* First, disable everything */
writel(0, &regs->pl011_cr);
/*
* Set baud rate
*
* IBRD = UART_CLK / (16 * BAUD_RATE)
* FBRD = RND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE))
*/
temp = 16 * baudrate;
divider = CONFIG_PL011_CLOCK / temp;
remainder = CONFIG_PL011_CLOCK % temp;
temp = (8 * remainder) / baudrate;
fraction = (temp >> 1) + (temp & 1);
writel(divider, &regs->pl011_ibrd);
writel(fraction, &regs->pl011_fbrd);
/* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
writel(UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN,
&regs->pl011_lcrh);
/* Finally, enable the UART */
writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE,
&regs->pl011_cr);
return 0;
}
#endif /* CONFIG_PL011_SERIAL */
void serial_putc (const char c)
{
if (c == '\n')
pl01x_putc (CONSOLE_PORT, '\r');
pl01x_putc (CONSOLE_PORT, c);
}
void serial_puts (const char *s)
{
while (*s) {
serial_putc (*s++);
}
}
int serial_getc (void)
{
return pl01x_getc (CONSOLE_PORT);
}
int serial_tstc (void)
{
return pl01x_tstc (CONSOLE_PORT);
}
void serial_setbrg (void)
{
baudrate = gd->baudrate;
serial_init();
}
static void pl01x_putc (int portnum, char c)
{
struct pl01x_regs *regs = pl01x_get_regs(portnum);
/* Wait until there is space in the FIFO */
while (readl(&regs->fr) & UART_PL01x_FR_TXFF)
WATCHDOG_RESET();
/* Send the character */
writel(c, &regs->dr);
}
static int pl01x_getc (int portnum)
{
struct pl01x_regs *regs = pl01x_get_regs(portnum);
unsigned int data;
/* Wait until there is data in the FIFO */
while (readl(&regs->fr) & UART_PL01x_FR_RXFE)
WATCHDOG_RESET();
data = readl(&regs->dr);
/* Check for an error flag */
if (data & 0xFFFFFF00) {
/* Clear the error */
writel(0xFFFFFFFF, &regs->ecr);
return -1;
}
return (int) data;
}
static int pl01x_tstc (int portnum)
{
struct pl01x_regs *regs = pl01x_get_regs(portnum);
WATCHDOG_RESET();
return !(readl(&regs->fr) & UART_PL01x_FR_RXFE);
}