vbe: Add Kconfig options for VPL
Enable the various features needed in VPL, by adding Kconfig options.
Update the defconfig for sandbox_vpl so that the build for each phase
includes what is needed. Drop LZMA for now and make sure partition support
is omitted in SPL, since it is not needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/boot/Kconfig b/boot/Kconfig
index 6eb056d..9334497 100644
--- a/boot/Kconfig
+++ b/boot/Kconfig
@@ -292,6 +292,57 @@
endif # SPL
+if VPL
+
+config VPL_FIT
+ bool "Support Flattened Image Tree within VPL"
+ depends on VPL
+ default y
+ select VPL_HASH
+ select VPL_OF_LIBFDT
+
+config VPL_FIT_PRINT
+ bool "Support FIT printing within VPL"
+ depends on VPL_FIT
+ default y
+ help
+ Support printing the content of the fitImage in a verbose manner in VPL.
+
+config VPL_FIT_FULL_CHECK
+ bool "Do a full check of the FIT before using it"
+ default y
+ help
+ Enable this do a full check of the FIT to make sure it is valid. This
+ helps to protect against carefully crafted FITs which take advantage
+ of bugs or omissions in the code. This includes a bad structure,
+ multiple root nodes and the like.
+
+config VPL_FIT_SIGNATURE
+ bool "Enable signature verification of FIT firmware within VPL"
+ depends on VPL_DM
+ depends on VPL_LOAD_FIT || VPL_LOAD_FIT_FULL
+ default y
+ select FIT_SIGNATURE
+ select VPL_FIT
+ select VPL_CRYPTO
+ select VPL_HASH
+ imply VPL_RSA
+ imply VPL_RSA_VERIFY
+ select VPL_IMAGE_SIGN_INFO
+ select VPL_FIT_FULL_CHECK
+
+config VPL_FIT_SIGNATURE_MAX_SIZE
+ hex "Max size of signed FIT structures in VPL"
+ depends on VPL_FIT_SIGNATURE
+ default 0x10000000
+ help
+ This option sets a max size in bytes for verified FIT uImages.
+ A sane value of 256MB protects corrupted DTB structures from overlapping
+ device memory. Assure this size does not extend past expected storage
+ space.
+
+endif # VPL
+
endif # FIT
config PXE_UTILS
@@ -334,6 +385,26 @@
- support for selecting the ordering of bootdevs using the devicetree
as well as the "boot_targets" environment variable
+config SPL_BOOTSTD
+ bool "Standard boot support in VPL"
+ depends on SPL && SPL_DM && SPL_OF_CONTROL && SPL_BLK
+ default y if VPL
+ help
+ This enables standard boot in SPL. This is neeeded so that VBE
+ (Verified Boot for Embedded) can be used, since it depends on standard
+ boot. It is enabled by default since the main purpose of VPL is to
+ handle the firmware part of VBE.
+
+config VPL_BOOTSTD
+ bool "Standard boot support in VPL"
+ depends on VPL && VPL_DM && VPL_OF_CONTROL && VPL_BLK
+ default y
+ help
+ This enables standard boot in SPL. This is neeeded so that VBE
+ (Verified Boot for Embedded) can be used, since it depends on standard
+ boot. It is enabled by default since the main purpose of VPL is to
+ handle the firmware part of VBE.
+
if BOOTSTD
config BOOTSTD_BOOTCOMMAND
@@ -408,6 +479,24 @@
supports selection of various firmware components, seleciton of an OS to
boot as well as updating these using fwupd.
+config SPL_BOOTMETH_VBE
+ bool "Bootdev support for Verified Boot for Embedded (SPL)"
+ depends on SPL && FIT
+ default y if VPL
+ help
+ Enables support for VBE boot. This is a standard boot method which
+ supports selection of various firmware components, seleciton of an OS to
+ boot as well as updating these using fwupd.
+
+config VPL_BOOTMETH_VBE
+ bool "Bootdev support for Verified Boot for Embedded (VPL)"
+ depends on VPL && FIT
+ default y
+ help
+ Enables support for VBE boot. This is a standard boot method which
+ supports selection of various firmware components, seleciton of an OS to
+ boot as well as updating these using fwupd.
+
if BOOTMETH_VBE
config BOOTMETH_VBE_SIMPLE
@@ -418,6 +507,54 @@
firmware image in boot media such as MMC. It does not support any sort
of rollback, recovery or A/B boot.
+config BOOTMETH_VBE_SIMPLE_OS
+ bool "Bootdev support for VBE 'simple' method OS phase"
+ default y
+ help
+ Enables support for the OS parts of VBE 'simple' boot. This includes
+ fixing up the device tree with the required VBE information, ready
+ for booting into the OS. This option is only enabled for U-Boot
+ proper, since it is the phase where device tree fixups happen.
+
+config SPL_BOOTMETH_VBE_SIMPLE
+ bool "Bootdev support for VBE 'simple' method (SPL)"
+ depends on SPL
+ default y if VPL
+ help
+ Enables support for VBE 'simple' boot. This allows updating a single
+ firmware image in boot media such as MMC. It does not support any sort
+ of rollback, recovery or A/B boot.
+
+config VPL_BOOTMETH_VBE_SIMPLE
+ bool "Bootdev support for VBE 'simple' method (VPL)"
+ depends on VPL
+ default y
+ help
+ Enables support for VBE 'simple' boot. This allows updating a single
+ firmware image in boot media such as MMC. It does not support any sort
+ of rollback, recovery or A/B boot.
+
+config SPL_BOOTMETH_VBE_SIMPLE_FW
+ bool "Bootdev support for VBE 'simple' method firmware phase (SPL)"
+ depends on VPL
+ default y
+ help
+ Enables support for the firmware parts of VBE 'simple' boot. This
+ includes an SPL loader which locates the correct U-Boot to boot into.
+ This option should really only be enabled for VPL, since it is the
+ phase where the SPL + U-Boot decision should be made. But for now,
+ SPL does its own FIT-configuration selection.
+
+config VPL_BOOTMETH_VBE_SIMPLE_FW
+ bool "Bootdev support for VBE 'simple' method firmware phase (VPL)"
+ depends on VPL
+ default y
+ help
+ Enables support for the firmware parts of VBE 'simple' boot. This
+ includes an SPL loader which locates the correct SPL to boot into.
+ This option enabled for VPL, since it is the phase where the SPL
+ decision is made.
+
endif # BOOTMETH_VBE
config BOOTMETH_SANDBOX