Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
The removed MII routines will be placed in mii.c.
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
diff --git a/board/freescale/m5329evb/m5329evb.c b/board/freescale/m5329evb/m5329evb.c
index 4ccea30..07a02c2 100644
--- a/board/freescale/m5329evb/m5329evb.c
+++ b/board/freescale/m5329evb/m5329evb.c
@@ -24,13 +24,9 @@
* MA 02111-1307 USA
*/
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/m5329.h>
-#include <asm/immap_5329.h>
-
#include <config.h>
-#include <net.h>
+#include <common.h>
+#include <asm/immap.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -97,280 +93,5 @@
/* This sync function is PowerPC intruction,
coldfire does not have this instruction. Dummy function */
}
-#endif
+#endif /* CFG_FLASH_CFI */
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
- volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
- if (setclear) {
- gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
- gpio->par_feci2c |=
- GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO;
- } else {
- gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
- gpio->par_feci2c &=
- ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
- }
- return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || (CONFIG_COMMANDS & CFG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \
- (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \
- (REG & 0x1f) << 18) | \
- (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970 0x78100000 /* LXT970 */
-#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
-#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
-#define PHY_ID_QS6612 0x01814400 /* QS6612 */
-#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
-#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
-#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
-#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */
-#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */
-
-#define STR_ID_LXT970 "LXT970"
-#define STR_ID_LXT971 "LXT971"
-#define STR_ID_82555 "Intel82555"
-#define STR_ID_QS6612 "QS6612"
-#define STR_ID_AMD79C784 "AMD79C784"
-#define STR_ID_LSI80225 "LSI80225"
-#define STR_ID_LSI80225B "LSI80225/B"
-#define STR_ID_DP83848VV "N83848"
-#define STR_ID_DP83849 "N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
- volatile fec_t *fecp = (fec_t *) (info->miibase);
- int i;
-
- fecp->ecr = FEC_ECR_RESET;
- for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
- udelay(1);
- }
- if (i == FEC_RESET_DELAY) {
- printf("FEC_RESET_DELAY timeout\n");
- }
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
- struct fec_info_s *info;
- struct eth_device *dev;
- volatile fec_t *ep;
- uint mii_reply;
- int j = 0;
-
- /* retrieve from register structure */
- dev = eth_get_dev();
- info = dev->priv;
-
- ep = (fec_t *) info->miibase;
-
- ep->mmfr = mii_cmd; /* command to phy */
-
- /* wait for mii complete */
- while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
- udelay(1);
- j++;
- }
- if (j >= MCFFEC_TOUT_LOOP) {
- printf("MII not complete\n");
- return -1;
- }
-
- mii_reply = ep->mmfr; /* result from phy */
- ep->eir = FEC_EIR_MII; /* clear MII complete */
-#ifdef ET_DEBUG
- printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
- __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
- return (mii_reply & 0xffff); /* data read from phy */
-}
-#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CFG_CMD_MII) */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
- struct fec_info_s *info = dev->priv;
- int phyaddr, pass;
- uint phyno, phytype;
-
- if (info->phyname_init)
- return info->phy_addr;
-
- phyaddr = -1; /* didn't find a PHY yet */
- for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
- if (pass > 1) {
- /* PHY may need more time to recover from reset.
- * The LXT970 needs 50ms typical, no maximum is
- * specified, so wait 10ms before try again.
- * With 11 passes this gives it 100ms to wake up.
- */
- udelay(10000); /* wait 10ms */
- }
-
- for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
- phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
- printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
- if (phytype != 0xffff) {
- phyaddr = phyno;
- phytype <<= 16;
- phytype |=
- mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
- switch (phytype & 0xffffffff) {
- case PHY_ID_DP83848VV:
- strcpy(info->phy_name,
- STR_ID_DP83848VV);
- info->phyname_init = 1;
- break;
- default:
- strcpy(info->phy_name, "unknown");
- info->phyname_init = 1;
- break;
- }
-
-#ifdef ET_DEBUG
- printf("PHY @ 0x%x pass %d type ", phyno, pass);
- switch (phytype & 0xffffffff) {
- case PHY_ID_DP83848VV:
- printf(STR_ID_DP83848VV);
- break;
- default:
- printf("0x%08x\n", phytype);
- break;
- }
-#endif
- }
- }
- }
- if (phyaddr < 0)
- printf("No PHY device found.\n");
-
- return phyaddr;
-}
-#endif /* CFG_DISCOVER_PHY */
-
-void mii_init(void)
-{
- volatile fec_t *fecp;
- struct fec_info_s *info;
- struct eth_device *dev;
- int miispd = 0, i = 0;
- u16 autoneg = 0;
-
- /* retrieve from register structure */
- dev = eth_get_dev();
- info = dev->priv;
-
- fecp = (fec_t *) info->miibase;
-
- fecpin_setclear(dev, 1);
-
- mii_reset(info);
-
- /* We use strictly polling mode only */
- fecp->eimr = 0;
-
- /* Clear any pending interrupt */
- fecp->eir = 0xffffffff;
-
- /* Set MII speed */
- miispd = (gd->bus_clk / 1000000) / 5;
- fecp->mscr = miispd << 1;
-
- info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
- while (i < MCFFEC_TOUT_LOOP) {
- autoneg = 0;
- miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
- i++;
-
- if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
- break;
-
- udelay(500);
- }
- if (i >= MCFFEC_TOUT_LOOP) {
- printf("Auto Negotiation not complete\n");
- }
-
- /* adapt to the half/full speed settings */
- info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
- info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- * does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- * no PHY connected...
- * For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- * Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value)
-{
- short rdreg; /* register working value */
-
-#ifdef MII_DEBUG
- printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
- rdreg = mii_send(mk_mii_read(addr, reg));
-
- *value = rdreg;
-
-#ifdef MII_DEBUG
- printf("0x%04x\n", *value);
-#endif
-
- return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr,
- unsigned char reg, unsigned short value)
-{
- short rdreg; /* register working value */
-
-#ifdef MII_DEBUG
- printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
- rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
- printf("0x%04x\n", value);
-#endif
-
- return 0;
-}
-
-#endif /* CFG_CMD_NET, FEC_ENET & NET_MULTI */