* Patches by Xianghua Xiao, 15 Oct 2003:
- Added Motorola CPU 8540/8560 support (cpu/85xx)
- Added Motorola MPC8540ADS board support (board/mpc8540ads)
- Added Motorola MPC8560ADS board support (board/mpc8560ads)
* Minor code cleanup
diff --git a/drivers/sk98lin/h/skgeinit.h b/drivers/sk98lin/h/skgeinit.h
index f9148d1..cdddef9 100644
--- a/drivers/sk98lin/h/skgeinit.h
+++ b/drivers/sk98lin/h/skgeinit.h
@@ -29,71 +29,71 @@
* Revision 1.75 2003/02/05 13:36:39 rschmidt
* Added define SK_FACT_78 for YUKON's Host Clock of 78.12 MHz
* Editorial changes
- *
+ *
* Revision 1.74 2003/01/28 09:39:16 rschmidt
* Added entry GIYukonLite in s_GeInit structure
* Editorial changes
- *
+ *
* Revision 1.73 2002/11/15 12:47:25 rschmidt
* Replaced error message SKERR_HWI_E024 for Cable Diagnostic with
* Rx queue error in SkGeStopPort().
- *
+ *
* Revision 1.72 2002/11/12 17:08:35 rschmidt
* Added entries for Cable Diagnostic to Port structure
* Added entries GIPciSlot64 and GIPciClock66 in s_GeInit structure
* Added error message for Cable Diagnostic
* Added prototypes for SkGmCableDiagStatus()
* Editorial changes
- *
+ *
* Revision 1.71 2002/10/21 11:26:10 mkarl
* Changed interface of SkGeInitAssignRamToQueues().
- *
+ *
* Revision 1.70 2002/10/14 08:21:32 rschmidt
* Changed type of GICopperType, GIVauxAvail to SK_BOOL
* Added entry PRxOverCnt to Port structure
* Added entry GIYukon32Bit in s_GeInit structure
* Editorial changes
- *
+ *
* Revision 1.69 2002/10/09 16:57:15 mkarl
* Added some constants and macros for SkGeInitAssignRamToQueues().
- *
+ *
* Revision 1.68 2002/09/12 08:58:51 rwahl
* Retrieve counters needed for XMAC errata workarounds directly because
* PNMI returns corrected counter values (e.g. #10620).
- *
+ *
* Revision 1.67 2002/08/16 14:40:30 rschmidt
* Added entries GIGenesis and GICopperType in s_GeInit structure
* Added prototypes for SkMacHashing()
* Editorial changes
- *
+ *
* Revision 1.66 2002/08/12 13:27:21 rschmidt
* Added defines for Link speed capabilities
* Added entry PLinkSpeedCap to Port structure
* Added entry GIVauxAvail in s_GeInit structure
* Added prototypes for SkMacPromiscMode()
* Editorial changes
- *
+ *
* Revision 1.65 2002/08/08 15:46:18 rschmidt
* Added define SK_PHY_ACC_TO for PHY access timeout
* Added define SK_XM_RX_HI_WM for XMAC Rx High Watermark
* Added define SK_MIN_TXQ_SIZE for Min RAM Buffer Tx Queue Size
* Added entry PhyId1 to Port structure
- *
+ *
* Revision 1.64 2002/07/23 16:02:56 rschmidt
* Added entry GIWolOffs in s_GeInit struct (HW-Bug in YUKON 1st rev.)
* Added prototypes for: SkGePhyRead(), SkGePhyWrite()
- *
+ *
* Revision 1.63 2002/07/18 08:17:38 rwahl
* Corrected definitions for SK_LSPEED_xxx & SK_LSPEED_STAT_xxx.
- *
+ *
* Revision 1.62 2002/07/17 18:21:55 rwahl
* Added SK_LSPEED_INDETERMINATED define.
- *
+ *
* Revision 1.61 2002/07/17 17:16:03 rwahl
* - MacType now member of GIni struct.
* - Struct alignment to 32bit.
* - Editorial change.
- *
+ *
* Revision 1.60 2002/07/15 18:23:39 rwahl
* Added GeMacFunc to GE Init structure.
* Added prototypes for SkXmUpdateStats(), SkGmUpdateStats(),
@@ -101,19 +101,19 @@
* SkGmResetCounter(), SkXmOverflowStatus(), SkGmOverflowStatus().
* Added defines for current link speed state.
* Added ERRMSG defintions for MacUpdateStat() & MacStatistics().
- *
+ *
* Revision 1.59 2002/07/15 15:40:22 rschmidt
* Added entry PLinkSpeedUsed to Port structure
* Editorial changes
- *
+ *
* Revision 1.58 2002/06/10 09:36:30 rschmidt
* Editorial changes.
- *
+ *
* Revision 1.57 2002/06/05 08:18:00 rschmidt
* Corrected alignment in Port Structure
* Added new prototypes for GMAC
* Editorial changes
- *
+ *
* Revision 1.56 2002/04/25 11:38:12 rschmidt
* Added defines for Link speed values
* Added defines for Loopback parameters for MAC and PHY
@@ -128,150 +128,150 @@
* SkXmPhyRead(), SkXmPhyRead(), SkGmPhyWrite(), SkGmPhyWrite();
* Removed prototypes for static functions in SkXmac2.c
* Editorial changes
- *
+ *
* Revision 1.55 2002/02/26 15:24:53 rwahl
* Fix: no link with manual configuration (#10673). The previous fix for
* #10639 was removed. So for RLMT mode = CLS the RLMT may switch to
* misconfigured port. It should not occur for the other RLMT modes.
- *
+ *
* Revision 1.54 2002/01/18 16:52:52 rwahl
* Editorial corrections.
- *
+ *
* Revision 1.53 2001/11/20 09:19:58 rwahl
* Reworked bugfix #10639 (no dependency to RLMT mode).
- *
+ *
* Revision 1.52 2001/10/26 07:52:23 afischer
* Port switching bug in `check local link` mode
- *
+ *
* Revision 1.51 2001/02/09 12:26:38 cgoos
* Inserted #ifdef DIAG for half duplex workaround timer.
- *
+ *
* Revision 1.50 2001/02/07 07:56:40 rassmann
* Corrected copyright.
- *
+ *
* Revision 1.49 2001/01/31 15:32:18 gklug
* fix: problem with autosensing an SR8800 switch
* add: counter for autoneg timeouts
- *
+ *
* Revision 1.48 2000/11/09 11:30:10 rassmann
* WA: Waiting after releasing reset until BCom chip is accessible.
- *
+ *
* Revision 1.47 2000/10/18 12:22:40 cgoos
* Added workaround for half duplex hangup.
- *
+ *
* Revision 1.46 2000/08/10 11:28:00 rassmann
* Editorial changes.
* Preserving 32-bit alignment in structs for the adapter context.
- *
+ *
* Revision 1.45 1999/11/22 13:56:19 cgoos
* Changed license header to GPL.
- *
+ *
* Revision 1.44 1999/10/26 07:34:15 malthoff
* The define SK_LNK_ON has been lost in v1.41.
- *
+ *
* Revision 1.43 1999/10/06 09:30:16 cgoos
* Changed SK_XM_THR_JUMBO.
- *
+ *
* Revision 1.42 1999/09/16 12:58:26 cgoos
* Changed SK_LED_STANDY macro to be independent of HW link sync.
- *
+ *
* Revision 1.41 1999/07/30 06:56:14 malthoff
* Correct comment for SK_MS_STAT_UNSET.
- *
+ *
* Revision 1.40 1999/05/27 13:38:46 cgoos
* Added SK_BMU_TX_WM.
* Made SK_BMU_TX_WM and SK_BMU_RX_WM user-definable.
* Changed XMAC Tx treshold to max. values.
- *
+ *
* Revision 1.39 1999/05/20 14:35:26 malthoff
* Remove prototypes for SkGeLinkLED().
- *
+ *
* Revision 1.38 1999/05/19 11:59:12 cgoos
* Added SK_MS_CAP_INDETERMINATED define.
- *
+ *
* Revision 1.37 1999/05/19 07:32:33 cgoos
* Changes for 1000Base-T.
* LED-defines for HWAC_LINK_LED macro.
- *
+ *
* Revision 1.36 1999/04/08 14:00:24 gklug
* add:Port struct field PLinkResCt
- *
+ *
* Revision 1.35 1999/03/25 07:43:07 malthoff
* Add error string for SKERR_HWI_E018MSG.
- *
+ *
* Revision 1.34 1999/03/12 16:25:57 malthoff
* Remove PPollRxD and PPollTxD.
* Add SKERR_HWI_E017MSG. and SK_DPOLL_MAX.
- *
+ *
* Revision 1.33 1999/03/12 13:34:41 malthoff
* Add Autonegotiation error codes.
* Change defines for parameter Mode in SkXmSetRxCmd().
* Replace __STDC__ by SK_KR_PROTO.
- *
+ *
* Revision 1.32 1999/01/25 14:40:20 mhaveman
* Added new return states for the virtual management port if multiple
* ports are active but differently configured.
- *
+ *
* Revision 1.31 1998/12/11 15:17:02 gklug
* add: Link partnet autoneg states : Unknown Manual and Auto-negotiation
- *
+ *
* Revision 1.30 1998/12/07 12:17:04 gklug
* add: Link Partner auto-negotiation flag
- *
+ *
* Revision 1.29 1998/12/01 10:54:42 gklug
* add: variables for XMAC Errata
- *
+ *
* Revision 1.28 1998/12/01 10:14:15 gklug
* add: PIsave saves the Interrupt status word
- *
+ *
* Revision 1.27 1998/11/26 15:24:52 mhaveman
* Added link status states SK_LMODE_STAT_AUTOHALF and
* SK_LMODE_STAT_AUTOFULL which are used by PNMI.
- *
+ *
* Revision 1.26 1998/11/26 14:53:01 gklug
* add:autoNeg Timeout variable
- *
+ *
* Revision 1.25 1998/11/26 08:58:50 gklug
* add: Link Mode configuration (AUTO Sense mode)
- *
+ *
* Revision 1.24 1998/11/24 13:30:27 gklug
* add: PCheckPar to port struct
- *
+ *
* Revision 1.23 1998/11/18 13:23:26 malthoff
* Add SK_PKT_TO_MAX.
- *
+ *
* Revision 1.22 1998/11/18 13:19:54 gklug
* add: PPrevShorts and PLinkBroken to port struct for WA XMAC Errata #C1
*
* Revision 1.21 1998/10/26 08:02:57 malthoff
* Add GIRamOffs.
- *
+ *
* Revision 1.20 1998/10/19 07:28:37 malthoff
* Add prototype for SkGeInitRamIface().
- *
+ *
* Revision 1.19 1998/10/14 14:47:48 malthoff
* SK_TIMER should not be defined for Diagnostics.
* Add SKERR_HWI_E015MSG and SKERR_HWI_E016MSG.
- *
+ *
* Revision 1.18 1998/10/14 14:00:03 gklug
* add: timer to port struct for workaround of Errata #2
- *
+ *
* Revision 1.17 1998/10/14 11:23:09 malthoff
* Add prototype for SkXmAutoNegDone().
* Fix SkXmSetRxCmd() prototype statement.
*
* Revision 1.16 1998/10/14 05:42:29 gklug
* add: HWLinkUp flag to Port struct
- *
+ *
* Revision 1.15 1998/10/09 08:26:33 malthoff
* Rename SK_RB_ULPP_B to SK_RB_LLPP_B.
- *
+ *
* Revision 1.14 1998/10/09 07:11:13 malthoff
* bug fix: SK_FACT_53 is 85 not 117.
* Rework time out init values.
* Add GIPortUsage and corresponding defines.
* Add some error log messages.
- *
+ *
* Revision 1.13 1998/10/06 14:13:14 malthoff
* Add prototype for SkGeLoadLnkSyncCnt().
*
@@ -338,7 +338,7 @@
/* modifying Link LED behaviour (used with SkGeLinkLED()) */
#define SK_LNK_OFF LED_OFF
-#define SK_LNK_ON (LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
+#define SK_LNK_ON (LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
#define SK_LNK_BLINK (LED_ON | LED_BLK_ON | LED_SYNC_ON)
#define SK_LNK_PERM (LED_ON | LED_BLK_OFF | LED_SYNC_ON)
#define SK_LNK_TST (LED_ON | LED_BLK_ON | LED_SYNC_OFF)
@@ -549,7 +549,7 @@
#define SK_LENERR_OK_ON (1<<4) /* Don't chk fr for in range len error */
#define SK_LENERR_OK_OFF (1<<5) /* Check frames for in range len error */
#define SK_BIG_PK_OK_ON (1<<6) /* Don't set Rx Error bit for big frames */
-#define SK_BIG_PK_OK_OFF (1<<7) /* Set Rx Error bit for big frames */
+#define SK_BIG_PK_OK_OFF (1<<7) /* Set Rx Error bit for big frames */
#define SK_SELF_RX_ON (1<<8) /* Enable Rx of own packets */
#define SK_SELF_RX_OFF (1<<9) /* Disable Rx of own packets */