power: rename stpmu1 to official name stpmic1
Alignment with kernel driver name & binding
introduced by https://patchwork.kernel.org/cover/10761943/
to use the final marketing name = STPMIC1.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
diff --git a/MAINTAINERS b/MAINTAINERS
index f9ee428..083bf47 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -295,7 +295,9 @@
F: drivers/mmc/stm32_sdmmc2.c
F: drivers/phy/phy-stm32-usbphyc.c
F: drivers/pinctrl/pinctrl_stm32.c
+F: drivers/power/pmic/stpmic1.c
F: drivers/power/regulator/stm32-vrefbuf.c
+F: drivers/power/regulator/stpmic1.c
F: drivers/ram/stm32mp1/
F: drivers/misc/stm32_rcc.c
F: drivers/reset/stm32-reset.c
diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts
index ddee286..1d0306e 100644
--- a/arch/arm/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/dts/stm32mp157c-ed1.dts
@@ -54,8 +54,8 @@
i2c-scl-falling-time-ns = <20>;
status = "okay";
- pmic: stpmu1@33 {
- compatible = "st,stpmu1";
+ pmic: stpmic1@33 {
+ compatible = "st,stpmic1";
reg = <0x33>;
interrupts = <0 2>;
interrupt-parent = <&gpioa>;
@@ -68,7 +68,7 @@
st,usb_control_register = <0x30>;
regulators {
- compatible = "st,stpmu1-regulators";
+ compatible = "st,stpmic1-regulators";
ldo1-supply = <&v3v3>;
ldo2-supply = <&v3v3>;
diff --git a/board/st/stm32mp1/README b/board/st/stm32mp1/README
index 1c3e865..72b28fa 100644
--- a/board/st/stm32mp1/README
+++ b/board/st/stm32mp1/README
@@ -28,7 +28,7 @@
And the necessary drivers
1. I2C
-2. STPMU1 (PMIC and regulator)
+2. STPMIC1 (PMIC and regulator)
3. Clock, Reset, Sysreset
4. Fuse
@@ -70,10 +70,10 @@
You need to select the appropriate device tree for your board,
the supported device trees for stm32mp157 are:
-+ ev1: eval board with pmic stpmu1 (ev1 = mother board + daughter ed1)
++ ev1: eval board with pmic stpmic1 (ev1 = mother board + daughter ed1)
dts: stm32mp157c-ev1
-+ ed1: daughter board with pmic stpmu1
++ ed1: daughter board with pmic stpmic1
dts: stm32mp157c-ed1
5. Build Procedure
diff --git a/board/st/stm32mp1/board.c b/board/st/stm32mp1/board.c
index 1bb9779..2a94f10 100644
--- a/board/st/stm32mp1/board.c
+++ b/board/st/stm32mp1/board.c
@@ -37,64 +37,65 @@
}
#endif
-#ifdef CONFIG_PMIC_STPMU1
+#ifdef CONFIG_PMIC_STPMIC1
int board_ddr_power_init(void)
{
struct udevice *dev;
int ret;
ret = uclass_get_device_by_driver(UCLASS_PMIC,
- DM_GET_DRIVER(pmic_stpmu1), &dev);
+ DM_GET_DRIVER(pmic_stpmic1), &dev);
if (ret)
/* No PMIC on board */
return 0;
- /* Set LDO3 to sync mode */
- ret = pmic_reg_read(dev, STPMU1_LDOX_CTRL_REG(STPMU1_LDO3));
+ /* VTT = Set LDO3 to sync mode */
+ ret = pmic_reg_read(dev, STPMIC1_LDOX_CTRL_REG(STPMIC1_LDO3));
if (ret < 0)
return ret;
- ret &= ~STPMU1_LDO3_MODE;
- ret &= ~STPMU1_LDO12356_OUTPUT_MASK;
- ret |= STPMU1_LDO3_DDR_SEL << STPMU1_LDO12356_OUTPUT_SHIFT;
+ ret &= ~STPMIC1_LDO3_MODE;
+ ret &= ~STPMIC1_LDO12356_OUTPUT_MASK;
+ ret |= STPMIC1_LDO3_DDR_SEL << STPMIC1_LDO12356_OUTPUT_SHIFT;
- ret = pmic_reg_write(dev, STPMU1_LDOX_CTRL_REG(STPMU1_LDO3),
+ ret = pmic_reg_write(dev, STPMIC1_LDOX_CTRL_REG(STPMIC1_LDO3),
ret);
if (ret < 0)
return ret;
- /* Set BUCK2 to 1.35V */
+ /* VDD_DDR = Set BUCK2 to 1.35V */
ret = pmic_clrsetbits(dev,
- STPMU1_BUCKX_CTRL_REG(STPMU1_BUCK2),
- STPMU1_BUCK_OUTPUT_MASK,
- STPMU1_BUCK2_1350000V);
+ STPMIC1_BUCKX_CTRL_REG(STPMIC1_BUCK2),
+ STPMIC1_BUCK_OUTPUT_MASK,
+ STPMIC1_BUCK2_1350000V);
if (ret < 0)
return ret;
- /* Enable BUCK2 and VREF */
+ /* Enable VDD_DDR = BUCK2 */
ret = pmic_clrsetbits(dev,
- STPMU1_BUCKX_CTRL_REG(STPMU1_BUCK2),
- STPMU1_BUCK_EN, STPMU1_BUCK_EN);
+ STPMIC1_BUCKX_CTRL_REG(STPMIC1_BUCK2),
+ STPMIC1_BUCK_EN, STPMIC1_BUCK_EN);
if (ret < 0)
return ret;
- mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
+ mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
- ret = pmic_clrsetbits(dev, STPMU1_VREF_CTRL_REG,
- STPMU1_VREF_EN, STPMU1_VREF_EN);
+ /* Enable VREF */
+ ret = pmic_clrsetbits(dev, STPMIC1_VREF_CTRL_REG,
+ STPMIC1_VREF_EN, STPMIC1_VREF_EN);
if (ret < 0)
return ret;
- mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
+ mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
/* Enable LDO3 */
ret = pmic_clrsetbits(dev,
- STPMU1_LDOX_CTRL_REG(STPMU1_LDO3),
- STPMU1_LDO_EN, STPMU1_LDO_EN);
+ STPMIC1_LDOX_CTRL_REG(STPMIC1_LDO3),
+ STPMIC1_LDO_EN, STPMIC1_LDO_EN);
if (ret < 0)
return ret;
- mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
+ mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
return 0;
}
diff --git a/board/st/stm32mp1/spl.c b/board/st/stm32mp1/spl.c
index 1202297..546a923 100644
--- a/board/st/stm32mp1/spl.c
+++ b/board/st/stm32mp1/spl.c
@@ -17,16 +17,16 @@
void spl_board_init(void)
{
/* Keep vdd on during the reset cycle */
-#if defined(CONFIG_PMIC_STPMU1) && defined(CONFIG_SPL_POWER_SUPPORT)
+#if defined(CONFIG_PMIC_STPMIC1) && defined(CONFIG_SPL_POWER_SUPPORT)
struct udevice *dev;
int ret;
ret = uclass_get_device_by_driver(UCLASS_PMIC,
- DM_GET_DRIVER(pmic_stpmu1), &dev);
+ DM_GET_DRIVER(pmic_stpmic1), &dev);
if (!ret)
pmic_clrsetbits(dev,
- STPMU1_MASK_RESET_BUCK,
- STPMU1_MASK_RESET_BUCK3,
- STPMU1_MASK_RESET_BUCK3);
+ STPMIC1_MASK_RESET_BUCK,
+ STPMIC1_MASK_RESET_BUCK3,
+ STPMIC1_MASK_RESET_BUCK3);
#endif
}
diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index fa27cad..ac52155 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -59,11 +59,11 @@
# CONFIG_SPL_PINCTRL_FULL is not set
CONFIG_DM_PMIC=y
# CONFIG_SPL_PMIC_CHILDREN is not set
-CONFIG_PMIC_STPMU1=y
+CONFIG_PMIC_STPMIC1=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_REGULATOR_STM32_VREFBUF=y
-CONFIG_DM_REGULATOR_STPMU1=y
+CONFIG_DM_REGULATOR_STPMIC1=y
CONFIG_SERIAL_RX_BUFFER=y
CONFIG_STM32_SERIAL=y
CONFIG_USB=y
diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig
index 447c1d9..0ffea5b 100644
--- a/configs/stm32mp15_trusted_defconfig
+++ b/configs/stm32mp15_trusted_defconfig
@@ -50,11 +50,11 @@
CONFIG_PHY_STM32_USBPHYC=y
# CONFIG_PINCTRL_FULL is not set
CONFIG_DM_PMIC=y
-CONFIG_PMIC_STPMU1=y
+CONFIG_PMIC_STPMIC1=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_REGULATOR_STM32_VREFBUF=y
-CONFIG_DM_REGULATOR_STPMU1=y
+CONFIG_DM_REGULATOR_STPMIC1=y
CONFIG_SERIAL_RX_BUFFER=y
CONFIG_STM32_SERIAL=y
CONFIG_USB=y
diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
index 8cf60eb..b0cd260 100644
--- a/drivers/power/pmic/Kconfig
+++ b/drivers/power/pmic/Kconfig
@@ -231,10 +231,10 @@
DC-DC converter, 8 LDOs and a RTC. This driver binds the SMPS and LDO
pmic children.
-config PMIC_STPMU1
- bool "Enable support for STMicroelectronics STPMU1 PMIC"
+config PMIC_STPMIC1
+ bool "Enable support for STMicroelectronics STPMIC1 PMIC"
depends on DM_PMIC && DM_I2C
---help---
- The STPMU1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF and 2 power switches.
+ The STPMIC1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF and 2 power switches.
It is accessed via an I2C interface. The device is used with STM32MP1
SoCs. This driver implements register read/write operations.
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index 147ac76..ce250cb 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -23,7 +23,7 @@
obj-$(CONFIG_$(SPL_)PMIC_PALMAS) += palmas.o
obj-$(CONFIG_$(SPL_)PMIC_LP873X) += lp873x.o
obj-$(CONFIG_$(SPL_)PMIC_LP87565) += lp87565.o
-obj-$(CONFIG_PMIC_STPMU1) += stpmic1.o
+obj-$(CONFIG_PMIC_STPMIC1) += stpmic1.o
obj-$(CONFIG_POWER_LTC3676) += pmic_ltc3676.o
obj-$(CONFIG_POWER_MAX77696) += pmic_max77696.o
diff --git a/drivers/power/pmic/stpmic1.c b/drivers/power/pmic/stpmic1.c
index 157ce8b..25450eb 100644
--- a/drivers/power/pmic/stpmic1.c
+++ b/drivers/power/pmic/stpmic1.c
@@ -10,26 +10,26 @@
#include <power/pmic.h>
#include <power/stpmic1.h>
-#define STMPU1_NUM_OF_REGS 0x100
+#define STPMIC1_NUM_OF_REGS 0x100
-#ifndef CONFIG_SPL_BUILD
-static const struct pmic_child_info stpmu1_children_info[] = {
- { .prefix = "ldo", .driver = "stpmu1_ldo" },
- { .prefix = "buck", .driver = "stpmu1_buck" },
- { .prefix = "vref_ddr", .driver = "stpmu1_vref_ddr" },
- { .prefix = "pwr_sw", .driver = "stpmu1_pwr_sw" },
- { .prefix = "boost", .driver = "stpmu1_boost" },
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
+static const struct pmic_child_info stpmic1_children_info[] = {
+ { .prefix = "ldo", .driver = "stpmic1_ldo" },
+ { .prefix = "buck", .driver = "stpmic1_buck" },
+ { .prefix = "vref_ddr", .driver = "stpmic1_vref_ddr" },
+ { .prefix = "pwr_sw", .driver = "stpmic1_pwr_sw" },
+ { .prefix = "boost", .driver = "stpmic1_boost" },
{ },
};
-#endif /* CONFIG_SPL_BUILD */
+#endif /* DM_REGULATOR */
-static int stpmu1_reg_count(struct udevice *dev)
+static int stpmic1_reg_count(struct udevice *dev)
{
- return STMPU1_NUM_OF_REGS;
+ return STPMIC1_NUM_OF_REGS;
}
-static int stpmu1_write(struct udevice *dev, uint reg, const uint8_t *buff,
- int len)
+static int stpmic1_write(struct udevice *dev, uint reg, const uint8_t *buff,
+ int len)
{
int ret;
@@ -41,7 +41,7 @@
return ret;
}
-static int stpmu1_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
+static int stpmic1_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
{
int ret;
@@ -53,43 +53,43 @@
return ret;
}
-static int stpmu1_bind(struct udevice *dev)
+static int stpmic1_bind(struct udevice *dev)
{
-#ifndef CONFIG_SPL_BUILD
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
ofnode regulators_node;
int children;
regulators_node = dev_read_subnode(dev, "regulators");
if (!ofnode_valid(regulators_node)) {
- dev_dbg(dev, "regulators subnode not found!\n");
+ dev_dbg(dev, "regulators subnode not found!");
return -ENXIO;
}
dev_dbg(dev, "found regulators subnode\n");
children = pmic_bind_children(dev, regulators_node,
- stpmu1_children_info);
+ stpmic1_children_info);
if (!children)
dev_dbg(dev, "no child found\n");
-#endif /* CONFIG_SPL_BUILD */
+#endif /* DM_REGULATOR */
return 0;
}
-static struct dm_pmic_ops stpmu1_ops = {
- .reg_count = stpmu1_reg_count,
- .read = stpmu1_read,
- .write = stpmu1_write,
+static struct dm_pmic_ops stpmic1_ops = {
+ .reg_count = stpmic1_reg_count,
+ .read = stpmic1_read,
+ .write = stpmic1_write,
};
-static const struct udevice_id stpmu1_ids[] = {
- { .compatible = "st,stpmu1" },
+static const struct udevice_id stpmic1_ids[] = {
+ { .compatible = "st,stpmic1" },
{ }
};
-U_BOOT_DRIVER(pmic_stpmu1) = {
- .name = "stpmu1_pmic",
+U_BOOT_DRIVER(pmic_stpmic1) = {
+ .name = "stpmic1_pmic",
.id = UCLASS_PMIC,
- .of_match = stpmu1_ids,
- .bind = stpmu1_bind,
- .ops = &stpmu1_ops,
+ .of_match = stpmic1_ids,
+ .bind = stpmic1_bind,
+ .ops = &stpmic1_ops,
};
diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig
index 3ed0dd2..72dfc48 100644
--- a/drivers/power/regulator/Kconfig
+++ b/drivers/power/regulator/Kconfig
@@ -244,11 +244,17 @@
regulator types of the TPS65910 (BUCK, BOOST and LDO). It implements
the get/set api for value and enable.
-config DM_REGULATOR_STPMU1
- bool "Enable driver for STPMU1 regulators"
- depends on DM_REGULATOR && PMIC_STPMU1
+config DM_REGULATOR_STPMIC1
+ bool "Enable driver for STPMIC1 regulators"
+ depends on DM_REGULATOR && PMIC_STPMIC1
---help---
- Enable support for the regulator functions of the STPMU1 PMIC. The
+ Enable support for the regulator functions of the STPMIC1 PMIC. The
driver implements get/set api for the various BUCKS and LDOs supported
by the PMIC device. This driver is controlled by a device tree node
which includes voltage limits.
+
+config SPL_DM_REGULATOR_STPMIC1
+ bool "Enable driver for STPMIC1 regulators in SPL"
+ depends on SPL_DM_REGULATOR && PMIC_STPMIC1
+ help
+ Enable support for the regulator functions of the STPMIC1 PMIC in SPL.
diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile
index cfc91e8..8c1506c 100644
--- a/drivers/power/regulator/Makefile
+++ b/drivers/power/regulator/Makefile
@@ -24,4 +24,4 @@
obj-$(CONFIG_$(SPL_)DM_REGULATOR_LP87565) += lp87565_regulator.o
obj-$(CONFIG_$(SPL_)DM_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
obj-$(CONFIG_DM_REGULATOR_TPS65910) += tps65910_regulator.o
-obj-$(CONFIG_$(SPL_)DM_REGULATOR_STPMU1) += stpmic1.o
+obj-$(CONFIG_$(SPL_)DM_REGULATOR_STPMIC1) += stpmic1.o
diff --git a/drivers/power/regulator/stpmic1.c b/drivers/power/regulator/stpmic1.c
index c62a19a..8602583 100644
--- a/drivers/power/regulator/stpmic1.c
+++ b/drivers/power/regulator/stpmic1.c
@@ -11,44 +11,44 @@
#include <power/regulator.h>
#include <power/stpmic1.h>
-struct stpmu1_range {
+struct stpmic1_range {
int min_uv;
int min_sel;
int max_sel;
int step;
};
-struct stpmu1_output_range {
- const struct stpmu1_range *ranges;
+struct stpmic1_output {
+ const struct stpmic1_range *ranges;
int nbranges;
};
-#define STPMU1_MODE(_id, _val, _name) { \
+#define STPMIC1_MODE(_id, _val, _name) { \
.id = _id, \
.register_value = _val, \
.name = _name, \
}
-#define STPMU1_RANGE(_min_uv, _min_sel, _max_sel, _step) { \
+#define STPMIC1_RANGE(_min_uv, _min_sel, _max_sel, _step) { \
.min_uv = _min_uv, \
.min_sel = _min_sel, \
.max_sel = _max_sel, \
.step = _step, \
}
-#define STPMU1_OUTPUT_RANGE(_ranges, _nbranges) { \
+#define STPMIC1_OUTPUT(_ranges, _nbranges) { \
.ranges = _ranges, \
.nbranges = _nbranges, \
}
-static int stpmu1_output_find_uv(int sel,
- const struct stpmu1_output_range *output_range)
+static int stpmic1_output_find_uv(int sel,
+ const struct stpmic1_output *output)
{
- const struct stpmu1_range *range;
+ const struct stpmic1_range *range;
int i;
- for (i = 0, range = output_range->ranges;
- i < output_range->nbranges; i++, range++) {
+ for (i = 0, range = output->ranges;
+ i < output->nbranges; i++, range++) {
if (sel >= range->min_sel && sel <= range->max_sel)
return range->min_uv +
(sel - range->min_sel) * range->step;
@@ -57,14 +57,14 @@
return -EINVAL;
}
-static int stpmu1_output_find_sel(int uv,
- const struct stpmu1_output_range *output_range)
+static int stpmic1_output_find_sel(int uv,
+ const struct stpmic1_output *output)
{
- const struct stpmu1_range *range;
+ const struct stpmic1_range *range;
int i;
- for (i = 0, range = output_range->ranges;
- i < output_range->nbranges; i++, range++) {
+ for (i = 0, range = output->ranges;
+ i < output->nbranges; i++, range++) {
if (uv == range->min_uv && !range->step)
return range->min_sel;
@@ -82,157 +82,157 @@
* BUCK regulators
*/
-static const struct stpmu1_range buck1_ranges[] = {
- STPMU1_RANGE(725000, 0, 4, 0),
- STPMU1_RANGE(725000, 5, 36, 25000),
- STPMU1_RANGE(1500000, 37, 63, 0),
+static const struct stpmic1_range buck1_ranges[] = {
+ STPMIC1_RANGE(725000, 0, 4, 0),
+ STPMIC1_RANGE(725000, 5, 36, 25000),
+ STPMIC1_RANGE(1500000, 37, 63, 0),
};
-static const struct stpmu1_range buck2_ranges[] = {
- STPMU1_RANGE(1000000, 0, 17, 0),
- STPMU1_RANGE(1050000, 18, 19, 0),
- STPMU1_RANGE(1100000, 20, 21, 0),
- STPMU1_RANGE(1150000, 22, 23, 0),
- STPMU1_RANGE(1200000, 24, 25, 0),
- STPMU1_RANGE(1250000, 26, 27, 0),
- STPMU1_RANGE(1300000, 28, 29, 0),
- STPMU1_RANGE(1350000, 30, 31, 0),
- STPMU1_RANGE(1400000, 32, 33, 0),
- STPMU1_RANGE(1450000, 34, 35, 0),
- STPMU1_RANGE(1500000, 36, 63, 0),
+static const struct stpmic1_range buck2_ranges[] = {
+ STPMIC1_RANGE(1000000, 0, 17, 0),
+ STPMIC1_RANGE(1050000, 18, 19, 0),
+ STPMIC1_RANGE(1100000, 20, 21, 0),
+ STPMIC1_RANGE(1150000, 22, 23, 0),
+ STPMIC1_RANGE(1200000, 24, 25, 0),
+ STPMIC1_RANGE(1250000, 26, 27, 0),
+ STPMIC1_RANGE(1300000, 28, 29, 0),
+ STPMIC1_RANGE(1350000, 30, 31, 0),
+ STPMIC1_RANGE(1400000, 32, 33, 0),
+ STPMIC1_RANGE(1450000, 34, 35, 0),
+ STPMIC1_RANGE(1500000, 36, 63, 0),
};
-static const struct stpmu1_range buck3_ranges[] = {
- STPMU1_RANGE(1000000, 0, 19, 0),
- STPMU1_RANGE(1100000, 20, 23, 0),
- STPMU1_RANGE(1200000, 24, 27, 0),
- STPMU1_RANGE(1300000, 28, 31, 0),
- STPMU1_RANGE(1400000, 32, 35, 0),
- STPMU1_RANGE(1500000, 36, 55, 100000),
- STPMU1_RANGE(3400000, 56, 63, 0),
+static const struct stpmic1_range buck3_ranges[] = {
+ STPMIC1_RANGE(1000000, 0, 19, 0),
+ STPMIC1_RANGE(1100000, 20, 23, 0),
+ STPMIC1_RANGE(1200000, 24, 27, 0),
+ STPMIC1_RANGE(1300000, 28, 31, 0),
+ STPMIC1_RANGE(1400000, 32, 35, 0),
+ STPMIC1_RANGE(1500000, 36, 55, 100000),
+ STPMIC1_RANGE(3400000, 56, 63, 0),
};
-static const struct stpmu1_range buck4_ranges[] = {
- STPMU1_RANGE(600000, 0, 27, 25000),
- STPMU1_RANGE(1300000, 28, 29, 0),
- STPMU1_RANGE(1350000, 30, 31, 0),
- STPMU1_RANGE(1400000, 32, 33, 0),
- STPMU1_RANGE(1450000, 34, 35, 0),
- STPMU1_RANGE(1500000, 36, 60, 100000),
- STPMU1_RANGE(3900000, 61, 63, 0),
+static const struct stpmic1_range buck4_ranges[] = {
+ STPMIC1_RANGE(600000, 0, 27, 25000),
+ STPMIC1_RANGE(1300000, 28, 29, 0),
+ STPMIC1_RANGE(1350000, 30, 31, 0),
+ STPMIC1_RANGE(1400000, 32, 33, 0),
+ STPMIC1_RANGE(1450000, 34, 35, 0),
+ STPMIC1_RANGE(1500000, 36, 60, 100000),
+ STPMIC1_RANGE(3900000, 61, 63, 0),
};
/* BUCK: 1,2,3,4 - voltage ranges */
-static const struct stpmu1_output_range buck_voltage_range[] = {
- STPMU1_OUTPUT_RANGE(buck1_ranges, ARRAY_SIZE(buck1_ranges)),
- STPMU1_OUTPUT_RANGE(buck2_ranges, ARRAY_SIZE(buck2_ranges)),
- STPMU1_OUTPUT_RANGE(buck3_ranges, ARRAY_SIZE(buck3_ranges)),
- STPMU1_OUTPUT_RANGE(buck4_ranges, ARRAY_SIZE(buck4_ranges)),
+static const struct stpmic1_output buck_voltage_range[] = {
+ STPMIC1_OUTPUT(buck1_ranges, ARRAY_SIZE(buck1_ranges)),
+ STPMIC1_OUTPUT(buck2_ranges, ARRAY_SIZE(buck2_ranges)),
+ STPMIC1_OUTPUT(buck3_ranges, ARRAY_SIZE(buck3_ranges)),
+ STPMIC1_OUTPUT(buck4_ranges, ARRAY_SIZE(buck4_ranges)),
};
/* BUCK modes */
static const struct dm_regulator_mode buck_modes[] = {
- STPMU1_MODE(STPMU1_BUCK_MODE_HP, STPMU1_BUCK_MODE_HP, "HP"),
- STPMU1_MODE(STPMU1_BUCK_MODE_LP, STPMU1_BUCK_MODE_LP, "LP"),
+ STPMIC1_MODE(STPMIC1_BUCK_MODE_HP, STPMIC1_BUCK_MODE_HP, "HP"),
+ STPMIC1_MODE(STPMIC1_BUCK_MODE_LP, STPMIC1_BUCK_MODE_LP, "LP"),
};
-static int stpmu1_buck_get_uv(struct udevice *dev, int buck)
+static int stpmic1_buck_get_uv(struct udevice *dev, int buck)
{
int sel;
- sel = pmic_reg_read(dev, STPMU1_BUCKX_CTRL_REG(buck));
+ sel = pmic_reg_read(dev, STPMIC1_BUCKX_CTRL_REG(buck));
if (sel < 0)
return sel;
- sel &= STPMU1_BUCK_OUTPUT_MASK;
- sel >>= STPMU1_BUCK_OUTPUT_SHIFT;
+ sel &= STPMIC1_BUCK_OUTPUT_MASK;
+ sel >>= STPMIC1_BUCK_OUTPUT_SHIFT;
- return stpmu1_output_find_uv(sel, &buck_voltage_range[buck]);
+ return stpmic1_output_find_uv(sel, &buck_voltage_range[buck]);
}
-static int stpmu1_buck_get_value(struct udevice *dev)
+static int stpmic1_buck_get_value(struct udevice *dev)
{
- return stpmu1_buck_get_uv(dev->parent, dev->driver_data - 1);
+ return stpmic1_buck_get_uv(dev->parent, dev->driver_data - 1);
}
-static int stpmu1_buck_set_value(struct udevice *dev, int uv)
+static int stpmic1_buck_set_value(struct udevice *dev, int uv)
{
int sel, buck = dev->driver_data - 1;
- sel = stpmu1_output_find_sel(uv, &buck_voltage_range[buck]);
+ sel = stpmic1_output_find_sel(uv, &buck_voltage_range[buck]);
if (sel < 0)
return sel;
return pmic_clrsetbits(dev->parent,
- STPMU1_BUCKX_CTRL_REG(buck),
- STPMU1_BUCK_OUTPUT_MASK,
- sel << STPMU1_BUCK_OUTPUT_SHIFT);
+ STPMIC1_BUCKX_CTRL_REG(buck),
+ STPMIC1_BUCK_OUTPUT_MASK,
+ sel << STPMIC1_BUCK_OUTPUT_SHIFT);
}
-static int stpmu1_buck_get_enable(struct udevice *dev)
+static int stpmic1_buck_get_enable(struct udevice *dev)
{
int ret;
ret = pmic_reg_read(dev->parent,
- STPMU1_BUCKX_CTRL_REG(dev->driver_data - 1));
+ STPMIC1_BUCKX_CTRL_REG(dev->driver_data - 1));
if (ret < 0)
return false;
- return ret & STPMU1_BUCK_EN ? true : false;
+ return ret & STPMIC1_BUCK_EN ? true : false;
}
-static int stpmu1_buck_set_enable(struct udevice *dev, bool enable)
+static int stpmic1_buck_set_enable(struct udevice *dev, bool enable)
{
struct dm_regulator_uclass_platdata *uc_pdata;
- int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS :
- STPMU1_DEFAULT_STOP_DELAY_MS;
+ int delay = enable ? STPMIC1_DEFAULT_START_UP_DELAY_MS :
+ STPMIC1_DEFAULT_STOP_DELAY_MS;
int ret, uv;
/* if regulator is already in the wanted state, nothing to do */
- if (stpmu1_buck_get_enable(dev) == enable)
+ if (stpmic1_buck_get_enable(dev) == enable)
return 0;
if (enable) {
uc_pdata = dev_get_uclass_platdata(dev);
- uv = stpmu1_buck_get_value(dev);
- if ((uv < uc_pdata->min_uV) || (uv > uc_pdata->max_uV))
- stpmu1_buck_set_value(dev, uc_pdata->min_uV);
+ uv = stpmic1_buck_get_value(dev);
+ if (uv < uc_pdata->min_uV || uv > uc_pdata->max_uV)
+ stpmic1_buck_set_value(dev, uc_pdata->min_uV);
}
ret = pmic_clrsetbits(dev->parent,
- STPMU1_BUCKX_CTRL_REG(dev->driver_data - 1),
- STPMU1_BUCK_EN, enable ? STPMU1_BUCK_EN : 0);
+ STPMIC1_BUCKX_CTRL_REG(dev->driver_data - 1),
+ STPMIC1_BUCK_EN, enable ? STPMIC1_BUCK_EN : 0);
mdelay(delay);
return ret;
}
-static int stpmu1_buck_get_mode(struct udevice *dev)
+static int stpmic1_buck_get_mode(struct udevice *dev)
{
int ret;
ret = pmic_reg_read(dev->parent,
- STPMU1_BUCKX_CTRL_REG(dev->driver_data - 1));
+ STPMIC1_BUCKX_CTRL_REG(dev->driver_data - 1));
if (ret < 0)
return ret;
- return ret & STPMU1_BUCK_MODE ? STPMU1_BUCK_MODE_LP :
- STPMU1_BUCK_MODE_HP;
+ return ret & STPMIC1_BUCK_MODE ? STPMIC1_BUCK_MODE_LP :
+ STPMIC1_BUCK_MODE_HP;
}
-static int stpmu1_buck_set_mode(struct udevice *dev, int mode)
+static int stpmic1_buck_set_mode(struct udevice *dev, int mode)
{
return pmic_clrsetbits(dev->parent,
- STPMU1_BUCKX_CTRL_REG(dev->driver_data - 1),
- STPMU1_BUCK_MODE,
- mode ? STPMU1_BUCK_MODE : 0);
+ STPMIC1_BUCKX_CTRL_REG(dev->driver_data - 1),
+ STPMIC1_BUCK_MODE,
+ mode ? STPMIC1_BUCK_MODE : 0);
}
-static int stpmu1_buck_probe(struct udevice *dev)
+static int stpmic1_buck_probe(struct udevice *dev)
{
struct dm_regulator_uclass_platdata *uc_pdata;
- if (!dev->driver_data || dev->driver_data > STPMU1_MAX_BUCK)
+ if (!dev->driver_data || dev->driver_data > STPMIC1_MAX_BUCK)
return -EINVAL;
uc_pdata = dev_get_uclass_platdata(dev);
@@ -244,206 +244,206 @@
return 0;
}
-static const struct dm_regulator_ops stpmu1_buck_ops = {
- .get_value = stpmu1_buck_get_value,
- .set_value = stpmu1_buck_set_value,
- .get_enable = stpmu1_buck_get_enable,
- .set_enable = stpmu1_buck_set_enable,
- .get_mode = stpmu1_buck_get_mode,
- .set_mode = stpmu1_buck_set_mode,
+static const struct dm_regulator_ops stpmic1_buck_ops = {
+ .get_value = stpmic1_buck_get_value,
+ .set_value = stpmic1_buck_set_value,
+ .get_enable = stpmic1_buck_get_enable,
+ .set_enable = stpmic1_buck_set_enable,
+ .get_mode = stpmic1_buck_get_mode,
+ .set_mode = stpmic1_buck_set_mode,
};
-U_BOOT_DRIVER(stpmu1_buck) = {
- .name = "stpmu1_buck",
+U_BOOT_DRIVER(stpmic1_buck) = {
+ .name = "stpmic1_buck",
.id = UCLASS_REGULATOR,
- .ops = &stpmu1_buck_ops,
- .probe = stpmu1_buck_probe,
+ .ops = &stpmic1_buck_ops,
+ .probe = stpmic1_buck_probe,
};
/*
* LDO regulators
*/
-static const struct stpmu1_range ldo12_ranges[] = {
- STPMU1_RANGE(1700000, 0, 7, 0),
- STPMU1_RANGE(1700000, 8, 24, 100000),
- STPMU1_RANGE(3300000, 25, 31, 0),
+static const struct stpmic1_range ldo12_ranges[] = {
+ STPMIC1_RANGE(1700000, 0, 7, 0),
+ STPMIC1_RANGE(1700000, 8, 24, 100000),
+ STPMIC1_RANGE(3300000, 25, 31, 0),
};
-static const struct stpmu1_range ldo3_ranges[] = {
- STPMU1_RANGE(1700000, 0, 7, 0),
- STPMU1_RANGE(1700000, 8, 24, 100000),
- STPMU1_RANGE(3300000, 25, 30, 0),
+static const struct stpmic1_range ldo3_ranges[] = {
+ STPMIC1_RANGE(1700000, 0, 7, 0),
+ STPMIC1_RANGE(1700000, 8, 24, 100000),
+ STPMIC1_RANGE(3300000, 25, 30, 0),
/* Sel 31 is special case when LDO3 is in mode sync_source (BUCK2/2) */
};
-static const struct stpmu1_range ldo5_ranges[] = {
- STPMU1_RANGE(1700000, 0, 7, 0),
- STPMU1_RANGE(1700000, 8, 30, 100000),
- STPMU1_RANGE(3900000, 31, 31, 0),
+static const struct stpmic1_range ldo5_ranges[] = {
+ STPMIC1_RANGE(1700000, 0, 7, 0),
+ STPMIC1_RANGE(1700000, 8, 30, 100000),
+ STPMIC1_RANGE(3900000, 31, 31, 0),
};
-static const struct stpmu1_range ldo6_ranges[] = {
- STPMU1_RANGE(900000, 0, 24, 100000),
- STPMU1_RANGE(3300000, 25, 31, 0),
+static const struct stpmic1_range ldo6_ranges[] = {
+ STPMIC1_RANGE(900000, 0, 24, 100000),
+ STPMIC1_RANGE(3300000, 25, 31, 0),
};
/* LDO: 1,2,3,4,5,6 - voltage ranges */
-static const struct stpmu1_output_range ldo_voltage_range[] = {
- STPMU1_OUTPUT_RANGE(ldo12_ranges, ARRAY_SIZE(ldo12_ranges)),
- STPMU1_OUTPUT_RANGE(ldo12_ranges, ARRAY_SIZE(ldo12_ranges)),
- STPMU1_OUTPUT_RANGE(ldo3_ranges, ARRAY_SIZE(ldo3_ranges)),
- STPMU1_OUTPUT_RANGE(NULL, 0),
- STPMU1_OUTPUT_RANGE(ldo5_ranges, ARRAY_SIZE(ldo5_ranges)),
- STPMU1_OUTPUT_RANGE(ldo6_ranges, ARRAY_SIZE(ldo6_ranges)),
+static const struct stpmic1_output ldo_voltage_range[] = {
+ STPMIC1_OUTPUT(ldo12_ranges, ARRAY_SIZE(ldo12_ranges)),
+ STPMIC1_OUTPUT(ldo12_ranges, ARRAY_SIZE(ldo12_ranges)),
+ STPMIC1_OUTPUT(ldo3_ranges, ARRAY_SIZE(ldo3_ranges)),
+ STPMIC1_OUTPUT(NULL, 0),
+ STPMIC1_OUTPUT(ldo5_ranges, ARRAY_SIZE(ldo5_ranges)),
+ STPMIC1_OUTPUT(ldo6_ranges, ARRAY_SIZE(ldo6_ranges)),
};
/* LDO modes */
static const struct dm_regulator_mode ldo_modes[] = {
- STPMU1_MODE(STPMU1_LDO_MODE_NORMAL,
- STPMU1_LDO_MODE_NORMAL, "NORMAL"),
- STPMU1_MODE(STPMU1_LDO_MODE_BYPASS,
- STPMU1_LDO_MODE_BYPASS, "BYPASS"),
- STPMU1_MODE(STPMU1_LDO_MODE_SINK_SOURCE,
- STPMU1_LDO_MODE_SINK_SOURCE, "SINK SOURCE"),
+ STPMIC1_MODE(STPMIC1_LDO_MODE_NORMAL,
+ STPMIC1_LDO_MODE_NORMAL, "NORMAL"),
+ STPMIC1_MODE(STPMIC1_LDO_MODE_BYPASS,
+ STPMIC1_LDO_MODE_BYPASS, "BYPASS"),
+ STPMIC1_MODE(STPMIC1_LDO_MODE_SINK_SOURCE,
+ STPMIC1_LDO_MODE_SINK_SOURCE, "SINK SOURCE"),
};
-static int stpmu1_ldo_get_value(struct udevice *dev)
+static int stpmic1_ldo_get_value(struct udevice *dev)
{
int sel, ldo = dev->driver_data - 1;
- sel = pmic_reg_read(dev->parent, STPMU1_LDOX_CTRL_REG(ldo));
+ sel = pmic_reg_read(dev->parent, STPMIC1_LDOX_CTRL_REG(ldo));
if (sel < 0)
return sel;
/* ldo4 => 3,3V */
- if (ldo == STPMU1_LDO4)
- return STPMU1_LDO4_UV;
+ if (ldo == STPMIC1_LDO4)
+ return STPMIC1_LDO4_UV;
- sel &= STPMU1_LDO12356_OUTPUT_MASK;
- sel >>= STPMU1_LDO12356_OUTPUT_SHIFT;
+ sel &= STPMIC1_LDO12356_OUTPUT_MASK;
+ sel >>= STPMIC1_LDO12356_OUTPUT_SHIFT;
/* ldo3, sel = 31 => BUCK2/2 */
- if (ldo == STPMU1_LDO3 && sel == STPMU1_LDO3_DDR_SEL)
- return stpmu1_buck_get_uv(dev->parent, STPMU1_BUCK2) / 2;
+ if (ldo == STPMIC1_LDO3 && sel == STPMIC1_LDO3_DDR_SEL)
+ return stpmic1_buck_get_uv(dev->parent, STPMIC1_BUCK2) / 2;
- return stpmu1_output_find_uv(sel, &ldo_voltage_range[ldo]);
+ return stpmic1_output_find_uv(sel, &ldo_voltage_range[ldo]);
}
-static int stpmu1_ldo_set_value(struct udevice *dev, int uv)
+static int stpmic1_ldo_set_value(struct udevice *dev, int uv)
{
int sel, ldo = dev->driver_data - 1;
/* ldo4 => not possible */
- if (ldo == STPMU1_LDO4)
+ if (ldo == STPMIC1_LDO4)
return -EINVAL;
- sel = stpmu1_output_find_sel(uv, &ldo_voltage_range[ldo]);
+ sel = stpmic1_output_find_sel(uv, &ldo_voltage_range[ldo]);
if (sel < 0)
return sel;
return pmic_clrsetbits(dev->parent,
- STPMU1_LDOX_CTRL_REG(ldo),
- STPMU1_LDO12356_OUTPUT_MASK,
- sel << STPMU1_LDO12356_OUTPUT_SHIFT);
+ STPMIC1_LDOX_CTRL_REG(ldo),
+ STPMIC1_LDO12356_OUTPUT_MASK,
+ sel << STPMIC1_LDO12356_OUTPUT_SHIFT);
}
-static int stpmu1_ldo_get_enable(struct udevice *dev)
+static int stpmic1_ldo_get_enable(struct udevice *dev)
{
int ret;
ret = pmic_reg_read(dev->parent,
- STPMU1_LDOX_CTRL_REG(dev->driver_data - 1));
+ STPMIC1_LDOX_CTRL_REG(dev->driver_data - 1));
if (ret < 0)
return false;
- return ret & STPMU1_LDO_EN ? true : false;
+ return ret & STPMIC1_LDO_EN ? true : false;
}
-static int stpmu1_ldo_set_enable(struct udevice *dev, bool enable)
+static int stpmic1_ldo_set_enable(struct udevice *dev, bool enable)
{
struct dm_regulator_uclass_platdata *uc_pdata;
- int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS :
- STPMU1_DEFAULT_STOP_DELAY_MS;
+ int delay = enable ? STPMIC1_DEFAULT_START_UP_DELAY_MS :
+ STPMIC1_DEFAULT_STOP_DELAY_MS;
int ret, uv;
/* if regulator is already in the wanted state, nothing to do */
- if (stpmu1_ldo_get_enable(dev) == enable)
+ if (stpmic1_ldo_get_enable(dev) == enable)
return 0;
if (enable) {
uc_pdata = dev_get_uclass_platdata(dev);
- uv = stpmu1_ldo_get_value(dev);
- if ((uv < uc_pdata->min_uV) || (uv > uc_pdata->max_uV))
- stpmu1_ldo_set_value(dev, uc_pdata->min_uV);
+ uv = stpmic1_ldo_get_value(dev);
+ if (uv < uc_pdata->min_uV || uv > uc_pdata->max_uV)
+ stpmic1_ldo_set_value(dev, uc_pdata->min_uV);
}
ret = pmic_clrsetbits(dev->parent,
- STPMU1_LDOX_CTRL_REG(dev->driver_data - 1),
- STPMU1_LDO_EN, enable ? STPMU1_LDO_EN : 0);
+ STPMIC1_LDOX_CTRL_REG(dev->driver_data - 1),
+ STPMIC1_LDO_EN, enable ? STPMIC1_LDO_EN : 0);
mdelay(delay);
return ret;
}
-static int stpmu1_ldo_get_mode(struct udevice *dev)
+static int stpmic1_ldo_get_mode(struct udevice *dev)
{
int ret, ldo = dev->driver_data - 1;
- if (ldo != STPMU1_LDO3)
+ if (ldo != STPMIC1_LDO3)
return -EINVAL;
- ret = pmic_reg_read(dev->parent, STPMU1_LDOX_CTRL_REG(ldo));
+ ret = pmic_reg_read(dev->parent, STPMIC1_LDOX_CTRL_REG(ldo));
if (ret < 0)
return ret;
- if (ret & STPMU1_LDO3_MODE)
- return STPMU1_LDO_MODE_BYPASS;
+ if (ret & STPMIC1_LDO3_MODE)
+ return STPMIC1_LDO_MODE_BYPASS;
- ret &= STPMU1_LDO12356_OUTPUT_MASK;
- ret >>= STPMU1_LDO12356_OUTPUT_SHIFT;
+ ret &= STPMIC1_LDO12356_OUTPUT_MASK;
+ ret >>= STPMIC1_LDO12356_OUTPUT_SHIFT;
- return ret == STPMU1_LDO3_DDR_SEL ? STPMU1_LDO_MODE_SINK_SOURCE :
- STPMU1_LDO_MODE_NORMAL;
+ return ret == STPMIC1_LDO3_DDR_SEL ? STPMIC1_LDO_MODE_SINK_SOURCE :
+ STPMIC1_LDO_MODE_NORMAL;
}
-static int stpmu1_ldo_set_mode(struct udevice *dev, int mode)
+static int stpmic1_ldo_set_mode(struct udevice *dev, int mode)
{
int ret, ldo = dev->driver_data - 1;
- if (ldo != STPMU1_LDO3)
+ if (ldo != STPMIC1_LDO3)
return -EINVAL;
- ret = pmic_reg_read(dev->parent, STPMU1_LDOX_CTRL_REG(ldo));
+ ret = pmic_reg_read(dev->parent, STPMIC1_LDOX_CTRL_REG(ldo));
if (ret < 0)
return ret;
switch (mode) {
- case STPMU1_LDO_MODE_SINK_SOURCE:
- ret &= ~STPMU1_LDO12356_OUTPUT_MASK;
- ret |= STPMU1_LDO3_DDR_SEL << STPMU1_LDO12356_OUTPUT_SHIFT;
- case STPMU1_LDO_MODE_NORMAL:
- ret &= ~STPMU1_LDO3_MODE;
+ case STPMIC1_LDO_MODE_SINK_SOURCE:
+ ret &= ~STPMIC1_LDO12356_OUTPUT_MASK;
+ ret |= STPMIC1_LDO3_DDR_SEL << STPMIC1_LDO12356_OUTPUT_SHIFT;
+ case STPMIC1_LDO_MODE_NORMAL:
+ ret &= ~STPMIC1_LDO3_MODE;
break;
- case STPMU1_LDO_MODE_BYPASS:
- ret |= STPMU1_LDO3_MODE;
+ case STPMIC1_LDO_MODE_BYPASS:
+ ret |= STPMIC1_LDO3_MODE;
break;
}
- return pmic_reg_write(dev->parent, STPMU1_LDOX_CTRL_REG(ldo), ret);
+ return pmic_reg_write(dev->parent, STPMIC1_LDOX_CTRL_REG(ldo), ret);
}
-static int stpmu1_ldo_probe(struct udevice *dev)
+static int stpmic1_ldo_probe(struct udevice *dev)
{
struct dm_regulator_uclass_platdata *uc_pdata;
- if (!dev->driver_data || dev->driver_data > STPMU1_MAX_LDO)
+ if (!dev->driver_data || dev->driver_data > STPMIC1_MAX_LDO)
return -EINVAL;
uc_pdata = dev_get_uclass_platdata(dev);
uc_pdata->type = REGULATOR_TYPE_LDO;
- if (dev->driver_data - 1 == STPMU1_LDO3) {
+ if (dev->driver_data - 1 == STPMIC1_LDO3) {
uc_pdata->mode = (struct dm_regulator_mode *)ldo_modes;
uc_pdata->mode_count = ARRAY_SIZE(ldo_modes);
} else {
@@ -453,61 +453,61 @@
return 0;
}
-static const struct dm_regulator_ops stpmu1_ldo_ops = {
- .get_value = stpmu1_ldo_get_value,
- .set_value = stpmu1_ldo_set_value,
- .get_enable = stpmu1_ldo_get_enable,
- .set_enable = stpmu1_ldo_set_enable,
- .get_mode = stpmu1_ldo_get_mode,
- .set_mode = stpmu1_ldo_set_mode,
+static const struct dm_regulator_ops stpmic1_ldo_ops = {
+ .get_value = stpmic1_ldo_get_value,
+ .set_value = stpmic1_ldo_set_value,
+ .get_enable = stpmic1_ldo_get_enable,
+ .set_enable = stpmic1_ldo_set_enable,
+ .get_mode = stpmic1_ldo_get_mode,
+ .set_mode = stpmic1_ldo_set_mode,
};
-U_BOOT_DRIVER(stpmu1_ldo) = {
- .name = "stpmu1_ldo",
+U_BOOT_DRIVER(stpmic1_ldo) = {
+ .name = "stpmic1_ldo",
.id = UCLASS_REGULATOR,
- .ops = &stpmu1_ldo_ops,
- .probe = stpmu1_ldo_probe,
+ .ops = &stpmic1_ldo_ops,
+ .probe = stpmic1_ldo_probe,
};
/*
* VREF DDR regulator
*/
-static int stpmu1_vref_ddr_get_value(struct udevice *dev)
+static int stpmic1_vref_ddr_get_value(struct udevice *dev)
{
/* BUCK2/2 */
- return stpmu1_buck_get_uv(dev->parent, STPMU1_BUCK2) / 2;
+ return stpmic1_buck_get_uv(dev->parent, STPMIC1_BUCK2) / 2;
}
-static int stpmu1_vref_ddr_get_enable(struct udevice *dev)
+static int stpmic1_vref_ddr_get_enable(struct udevice *dev)
{
int ret;
- ret = pmic_reg_read(dev->parent, STPMU1_VREF_CTRL_REG);
+ ret = pmic_reg_read(dev->parent, STPMIC1_VREF_CTRL_REG);
if (ret < 0)
return false;
- return ret & STPMU1_VREF_EN ? true : false;
+ return ret & STPMIC1_VREF_EN ? true : false;
}
-static int stpmu1_vref_ddr_set_enable(struct udevice *dev, bool enable)
+static int stpmic1_vref_ddr_set_enable(struct udevice *dev, bool enable)
{
- int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS :
- STPMU1_DEFAULT_STOP_DELAY_MS;
+ int delay = enable ? STPMIC1_DEFAULT_START_UP_DELAY_MS :
+ STPMIC1_DEFAULT_STOP_DELAY_MS;
int ret;
/* if regulator is already in the wanted state, nothing to do */
- if (stpmu1_vref_ddr_get_enable(dev) == enable)
+ if (stpmic1_vref_ddr_get_enable(dev) == enable)
return 0;
- ret = pmic_clrsetbits(dev->parent, STPMU1_VREF_CTRL_REG,
- STPMU1_VREF_EN, enable ? STPMU1_VREF_EN : 0);
+ ret = pmic_clrsetbits(dev->parent, STPMIC1_VREF_CTRL_REG,
+ STPMIC1_VREF_EN, enable ? STPMIC1_VREF_EN : 0);
mdelay(delay);
return ret;
}
-static int stpmu1_vref_ddr_probe(struct udevice *dev)
+static int stpmic1_vref_ddr_probe(struct udevice *dev)
{
struct dm_regulator_uclass_platdata *uc_pdata;
@@ -519,59 +519,59 @@
return 0;
}
-static const struct dm_regulator_ops stpmu1_vref_ddr_ops = {
- .get_value = stpmu1_vref_ddr_get_value,
- .get_enable = stpmu1_vref_ddr_get_enable,
- .set_enable = stpmu1_vref_ddr_set_enable,
+static const struct dm_regulator_ops stpmic1_vref_ddr_ops = {
+ .get_value = stpmic1_vref_ddr_get_value,
+ .get_enable = stpmic1_vref_ddr_get_enable,
+ .set_enable = stpmic1_vref_ddr_set_enable,
};
-U_BOOT_DRIVER(stpmu1_vref_ddr) = {
- .name = "stpmu1_vref_ddr",
+U_BOOT_DRIVER(stpmic1_vref_ddr) = {
+ .name = "stpmic1_vref_ddr",
.id = UCLASS_REGULATOR,
- .ops = &stpmu1_vref_ddr_ops,
- .probe = stpmu1_vref_ddr_probe,
+ .ops = &stpmic1_vref_ddr_ops,
+ .probe = stpmic1_vref_ddr_probe,
};
/*
* BOOST regulator
*/
-static int stpmu1_boost_get_enable(struct udevice *dev)
+static int stpmic1_boost_get_enable(struct udevice *dev)
{
int ret;
- ret = pmic_reg_read(dev->parent, STPMU1_USB_CTRL_REG);
+ ret = pmic_reg_read(dev->parent, STPMIC1_USB_CTRL_REG);
if (ret < 0)
return false;
- return ret & STPMU1_USB_BOOST_EN ? true : false;
+ return ret & STPMIC1_USB_BOOST_EN ? true : false;
}
-static int stpmu1_boost_set_enable(struct udevice *dev, bool enable)
+static int stpmic1_boost_set_enable(struct udevice *dev, bool enable)
{
int ret;
- ret = pmic_reg_read(dev->parent, STPMU1_USB_CTRL_REG);
+ ret = pmic_reg_read(dev->parent, STPMIC1_USB_CTRL_REG);
if (ret < 0)
return ret;
- if (!enable && ret & STPMU1_USB_PWR_SW_EN)
+ if (!enable && ret & STPMIC1_USB_PWR_SW_EN)
return -EINVAL;
/* if regulator is already in the wanted state, nothing to do */
- if (!!(ret & STPMU1_USB_BOOST_EN) == enable)
+ if (!!(ret & STPMIC1_USB_BOOST_EN) == enable)
return 0;
- ret = pmic_clrsetbits(dev->parent, STPMU1_USB_CTRL_REG,
- STPMU1_USB_BOOST_EN,
- enable ? STPMU1_USB_BOOST_EN : 0);
+ ret = pmic_clrsetbits(dev->parent, STPMIC1_USB_CTRL_REG,
+ STPMIC1_USB_BOOST_EN,
+ enable ? STPMIC1_USB_BOOST_EN : 0);
if (enable)
- mdelay(STPMU1_USB_BOOST_START_UP_DELAY_MS);
+ mdelay(STPMIC1_USB_BOOST_START_UP_DELAY_MS);
return ret;
}
-static int stpmu1_boost_probe(struct udevice *dev)
+static int stpmic1_boost_probe(struct udevice *dev)
{
struct dm_regulator_uclass_platdata *uc_pdata;
@@ -583,42 +583,42 @@
return 0;
}
-static const struct dm_regulator_ops stpmu1_boost_ops = {
- .get_enable = stpmu1_boost_get_enable,
- .set_enable = stpmu1_boost_set_enable,
+static const struct dm_regulator_ops stpmic1_boost_ops = {
+ .get_enable = stpmic1_boost_get_enable,
+ .set_enable = stpmic1_boost_set_enable,
};
-U_BOOT_DRIVER(stpmu1_boost) = {
- .name = "stpmu1_boost",
+U_BOOT_DRIVER(stpmic1_boost) = {
+ .name = "stpmic1_boost",
.id = UCLASS_REGULATOR,
- .ops = &stpmu1_boost_ops,
- .probe = stpmu1_boost_probe,
+ .ops = &stpmic1_boost_ops,
+ .probe = stpmic1_boost_probe,
};
/*
* USB power switch
*/
-static int stpmu1_pwr_sw_get_enable(struct udevice *dev)
+static int stpmic1_pwr_sw_get_enable(struct udevice *dev)
{
uint mask = 1 << dev->driver_data;
int ret;
- ret = pmic_reg_read(dev->parent, STPMU1_USB_CTRL_REG);
+ ret = pmic_reg_read(dev->parent, STPMIC1_USB_CTRL_REG);
if (ret < 0)
return false;
return ret & mask ? true : false;
}
-static int stpmu1_pwr_sw_set_enable(struct udevice *dev, bool enable)
+static int stpmic1_pwr_sw_set_enable(struct udevice *dev, bool enable)
{
uint mask = 1 << dev->driver_data;
- int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS :
- STPMU1_DEFAULT_STOP_DELAY_MS;
+ int delay = enable ? STPMIC1_DEFAULT_START_UP_DELAY_MS :
+ STPMIC1_DEFAULT_STOP_DELAY_MS;
int ret;
- ret = pmic_reg_read(dev->parent, STPMU1_USB_CTRL_REG);
+ ret = pmic_reg_read(dev->parent, STPMIC1_USB_CTRL_REG);
if (ret < 0)
return ret;
@@ -627,28 +627,28 @@
return 0;
/* Boost management */
- if (enable && !(ret & STPMU1_USB_BOOST_EN)) {
- pmic_clrsetbits(dev->parent, STPMU1_USB_CTRL_REG,
- STPMU1_USB_BOOST_EN, STPMU1_USB_BOOST_EN);
- mdelay(STPMU1_USB_BOOST_START_UP_DELAY_MS);
- } else if (!enable && ret & STPMU1_USB_BOOST_EN &&
- (ret & STPMU1_USB_PWR_SW_EN) != STPMU1_USB_PWR_SW_EN) {
- pmic_clrsetbits(dev->parent, STPMU1_USB_CTRL_REG,
- STPMU1_USB_BOOST_EN, 0);
+ if (enable && !(ret & STPMIC1_USB_BOOST_EN)) {
+ pmic_clrsetbits(dev->parent, STPMIC1_USB_CTRL_REG,
+ STPMIC1_USB_BOOST_EN, STPMIC1_USB_BOOST_EN);
+ mdelay(STPMIC1_USB_BOOST_START_UP_DELAY_MS);
+ } else if (!enable && ret & STPMIC1_USB_BOOST_EN &&
+ (ret & STPMIC1_USB_PWR_SW_EN) != STPMIC1_USB_PWR_SW_EN) {
+ pmic_clrsetbits(dev->parent, STPMIC1_USB_CTRL_REG,
+ STPMIC1_USB_BOOST_EN, 0);
}
- ret = pmic_clrsetbits(dev->parent, STPMU1_USB_CTRL_REG,
+ ret = pmic_clrsetbits(dev->parent, STPMIC1_USB_CTRL_REG,
mask, enable ? mask : 0);
mdelay(delay);
return ret;
}
-static int stpmu1_pwr_sw_probe(struct udevice *dev)
+static int stpmic1_pwr_sw_probe(struct udevice *dev)
{
struct dm_regulator_uclass_platdata *uc_pdata;
- if (!dev->driver_data || dev->driver_data > STPMU1_MAX_PWR_SW)
+ if (!dev->driver_data || dev->driver_data > STPMIC1_MAX_PWR_SW)
return -EINVAL;
uc_pdata = dev_get_uclass_platdata(dev);
@@ -659,14 +659,14 @@
return 0;
}
-static const struct dm_regulator_ops stpmu1_pwr_sw_ops = {
- .get_enable = stpmu1_pwr_sw_get_enable,
- .set_enable = stpmu1_pwr_sw_set_enable,
+static const struct dm_regulator_ops stpmic1_pwr_sw_ops = {
+ .get_enable = stpmic1_pwr_sw_get_enable,
+ .set_enable = stpmic1_pwr_sw_set_enable,
};
-U_BOOT_DRIVER(stpmu1_pwr_sw) = {
- .name = "stpmu1_pwr_sw",
+U_BOOT_DRIVER(stpmic1_pwr_sw) = {
+ .name = "stpmic1_pwr_sw",
.id = UCLASS_REGULATOR,
- .ops = &stpmu1_pwr_sw_ops,
- .probe = stpmu1_pwr_sw_probe,
+ .ops = &stpmic1_pwr_sw_ops,
+ .probe = stpmic1_pwr_sw_probe,
};
diff --git a/include/dt-bindings/mfd/st,stpmic1.h b/include/dt-bindings/mfd/st,stpmic1.h
index 81982eb..b2d6c83 100644
--- a/include/dt-bindings/mfd/st,stpmic1.h
+++ b/include/dt-bindings/mfd/st,stpmic1.h
@@ -1,60 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0 */
/*
- * This file is part of stpmu1 pmic driver
- *
- * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
- * Author: Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
- *
- * License type: GPLv2
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.
- * See the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Philippe Peurichard <philippe.peurichard@st.com>,
+ * Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
*/
-#ifndef __DT_BINDINGS_STPMU1_H__
-#define __DT_BINDINGS_STPMU1_H__
+#ifndef __DT_BINDINGS_STPMIC1_H__
+#define __DT_BINDINGS_STPMIC1_H__
/* IRQ definitions */
-#define IT_PONKEY_F 0
-#define IT_PONKEY_R 1
-#define IT_WAKEUP_F 2
-#define IT_WAKEUP_R 3
-#define IT_VBUS_OTG_F 4
-#define IT_VBUS_OTG_R 5
-#define IT_SWOUT_F 6
-#define IT_SWOUT_R 7
+#define IT_PONKEY_F 0
+#define IT_PONKEY_R 1
+#define IT_WAKEUP_F 2
+#define IT_WAKEUP_R 3
+#define IT_VBUS_OTG_F 4
+#define IT_VBUS_OTG_R 5
+#define IT_SWOUT_F 6
+#define IT_SWOUT_R 7
-#define IT_CURLIM_BUCK1 8
-#define IT_CURLIM_BUCK2 9
-#define IT_CURLIM_BUCK3 10
-#define IT_CURLIM_BUCK4 11
-#define IT_OCP_OTG 12
-#define IT_OCP_SWOUT 13
-#define IT_OCP_BOOST 14
-#define IT_OVP_BOOST 15
+#define IT_CURLIM_BUCK1 8
+#define IT_CURLIM_BUCK2 9
+#define IT_CURLIM_BUCK3 10
+#define IT_CURLIM_BUCK4 11
+#define IT_OCP_OTG 12
+#define IT_OCP_SWOUT 13
+#define IT_OCP_BOOST 14
+#define IT_OVP_BOOST 15
-#define IT_CURLIM_LDO1 16
-#define IT_CURLIM_LDO2 17
-#define IT_CURLIM_LDO3 18
-#define IT_CURLIM_LDO4 19
-#define IT_CURLIM_LDO5 20
-#define IT_CURLIM_LDO6 21
-#define IT_SHORT_SWOTG 22
-#define IT_SHORT_SWOUT 23
+#define IT_CURLIM_LDO1 16
+#define IT_CURLIM_LDO2 17
+#define IT_CURLIM_LDO3 18
+#define IT_CURLIM_LDO4 19
+#define IT_CURLIM_LDO5 20
+#define IT_CURLIM_LDO6 21
+#define IT_SHORT_SWOTG 22
+#define IT_SHORT_SWOUT 23
-#define IT_TWARN_F 24
-#define IT_TWARN_R 25
-#define IT_VINLOW_F 26
-#define IT_VINLOW_R 27
-#define IT_SWIN_F 30
-#define IT_SWIN_R 31
+#define IT_TWARN_F 24
+#define IT_TWARN_R 25
+#define IT_VINLOW_F 26
+#define IT_VINLOW_R 27
+#define IT_SWIN_F 30
+#define IT_SWIN_R 31
-#endif /* __DT_BINDINGS_STPMU1_H__ */
+#endif /* __DT_BINDINGS_STPMIC1_H__ */
diff --git a/include/power/stpmic1.h b/include/power/stpmic1.h
index 5906fbf..5ed67d2 100644
--- a/include/power/stpmic1.h
+++ b/include/power/stpmic1.h
@@ -3,83 +3,90 @@
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
*/
-#ifndef __PMIC_STPMU1_H_
-#define __PMIC_STPMU1_H_
+#ifndef __PMIC_STPMIC1_H_
+#define __PMIC_STPMIC1_H_
-#define STPMU1_MASK_RESET_BUCK 0x18
-#define STPMU1_BUCKX_CTRL_REG(buck) (0x20 + (buck))
-#define STPMU1_VREF_CTRL_REG 0x24
-#define STPMU1_LDOX_CTRL_REG(ldo) (0x25 + (ldo))
-#define STPMU1_USB_CTRL_REG 0x40
-#define STPMU1_NVM_USER_STATUS_REG 0xb8
-#define STPMU1_NVM_USER_CONTROL_REG 0xb9
+#define STPMIC1_MAIN_CONTROL_REG 0x10
+#define STPMIC1_MASK_RESET_BUCK 0x18
+#define STPMIC1_MASK_RESET_LDOS 0x1a
+#define STPMIC1_BUCKX_CTRL_REG(buck) (0x20 + (buck))
+#define STPMIC1_VREF_CTRL_REG 0x24
+#define STPMIC1_LDOX_CTRL_REG(ldo) (0x25 + (ldo))
+#define STPMIC1_USB_CTRL_REG 0x40
+#define STPMIC1_NVM_USER_STATUS_REG 0xb8
+#define STPMIC1_NVM_USER_CONTROL_REG 0xb9
-#define STPMU1_MASK_RESET_BUCK3 BIT(2)
+/* Main PMIC Control Register (MAIN_CONTROL_REG) */
+#define STPMIC1_CTRL_SWITCH_OFF BIT(0)
+#define STPMIC1_CTRL_RESTART BIT(1)
-#define STPMU1_BUCK_EN BIT(0)
-#define STPMU1_BUCK_MODE BIT(1)
-#define STPMU1_BUCK_OUTPUT_MASK GENMASK(7, 2)
-#define STPMU1_BUCK_OUTPUT_SHIFT 2
-#define STPMU1_BUCK2_1200000V (24 << STPMU1_BUCK_OUTPUT_SHIFT)
-#define STPMU1_BUCK2_1350000V (30 << STPMU1_BUCK_OUTPUT_SHIFT)
-#define STPMU1_BUCK3_1800000V (39 << STPMU1_BUCK_OUTPUT_SHIFT)
+#define STPMIC1_MASK_RESET_BUCK3 BIT(2)
+#define STPMIC1_MASK_RESET_BUCK_DBG GENMASK(3, 0)
+#define STPMIC1_MASK_RESET_LDOS_DBG 0x6F
-#define STPMU1_VREF_EN BIT(0)
+#define STPMIC1_BUCK_EN BIT(0)
+#define STPMIC1_BUCK_MODE BIT(1)
+#define STPMIC1_BUCK_OUTPUT_MASK GENMASK(7, 2)
+#define STPMIC1_BUCK_OUTPUT_SHIFT 2
+#define STPMIC1_BUCK2_1200000V (24 << STPMIC1_BUCK_OUTPUT_SHIFT)
+#define STPMIC1_BUCK2_1350000V (30 << STPMIC1_BUCK_OUTPUT_SHIFT)
+#define STPMIC1_BUCK3_1800000V (39 << STPMIC1_BUCK_OUTPUT_SHIFT)
-#define STPMU1_LDO_EN BIT(0)
-#define STPMU1_LDO12356_OUTPUT_MASK GENMASK(6, 2)
-#define STPMU1_LDO12356_OUTPUT_SHIFT 2
-#define STPMU1_LDO3_MODE BIT(7)
-#define STPMU1_LDO3_DDR_SEL 31
-#define STPMU1_LDO3_1800000 (9 << STPMU1_LDO12356_OUTPUT_SHIFT)
-#define STPMU1_LDO4_UV 3300000
+#define STPMIC1_VREF_EN BIT(0)
-#define STPMU1_USB_BOOST_EN BIT(0)
-#define STPMU1_USB_PWR_SW_EN GENMASK(2, 1)
+#define STPMIC1_LDO_EN BIT(0)
+#define STPMIC1_LDO12356_OUTPUT_MASK GENMASK(6, 2)
+#define STPMIC1_LDO12356_OUTPUT_SHIFT 2
+#define STPMIC1_LDO3_MODE BIT(7)
+#define STPMIC1_LDO3_DDR_SEL 31
+#define STPMIC1_LDO3_1800000 (9 << STPMIC1_LDO12356_OUTPUT_SHIFT)
+#define STPMIC1_LDO4_UV 3300000
-#define STPMU1_NVM_USER_CONTROL_PROGRAM BIT(0)
-#define STPMU1_NVM_USER_CONTROL_READ BIT(1)
+#define STPMIC1_USB_BOOST_EN BIT(0)
+#define STPMIC1_USB_PWR_SW_EN GENMASK(2, 1)
-#define STPMU1_NVM_USER_STATUS_BUSY BIT(0)
-#define STPMU1_NVM_USER_STATUS_ERROR BIT(1)
+#define STPMIC1_NVM_USER_CONTROL_PROGRAM BIT(0)
+#define STPMIC1_NVM_USER_CONTROL_READ BIT(1)
-#define STPMU1_DEFAULT_START_UP_DELAY_MS 1
-#define STPMU1_DEFAULT_STOP_DELAY_MS 5
-#define STPMU1_USB_BOOST_START_UP_DELAY_MS 10
+#define STPMIC1_NVM_USER_STATUS_BUSY BIT(0)
+#define STPMIC1_NVM_USER_STATUS_ERROR BIT(1)
+
+#define STPMIC1_DEFAULT_START_UP_DELAY_MS 1
+#define STPMIC1_DEFAULT_STOP_DELAY_MS 5
+#define STPMIC1_USB_BOOST_START_UP_DELAY_MS 10
enum {
- STPMU1_BUCK1,
- STPMU1_BUCK2,
- STPMU1_BUCK3,
- STPMU1_BUCK4,
- STPMU1_MAX_BUCK,
+ STPMIC1_BUCK1,
+ STPMIC1_BUCK2,
+ STPMIC1_BUCK3,
+ STPMIC1_BUCK4,
+ STPMIC1_MAX_BUCK,
};
enum {
- STPMU1_BUCK_MODE_HP,
- STPMU1_BUCK_MODE_LP,
+ STPMIC1_BUCK_MODE_HP,
+ STPMIC1_BUCK_MODE_LP,
};
enum {
- STPMU1_LDO1,
- STPMU1_LDO2,
- STPMU1_LDO3,
- STPMU1_LDO4,
- STPMU1_LDO5,
- STPMU1_LDO6,
- STPMU1_MAX_LDO,
+ STPMIC1_LDO1,
+ STPMIC1_LDO2,
+ STPMIC1_LDO3,
+ STPMIC1_LDO4,
+ STPMIC1_LDO5,
+ STPMIC1_LDO6,
+ STPMIC1_MAX_LDO,
};
enum {
- STPMU1_LDO_MODE_NORMAL,
- STPMU1_LDO_MODE_BYPASS,
- STPMU1_LDO_MODE_SINK_SOURCE,
+ STPMIC1_LDO_MODE_NORMAL,
+ STPMIC1_LDO_MODE_BYPASS,
+ STPMIC1_LDO_MODE_SINK_SOURCE,
};
enum {
- STPMU1_PWR_SW1,
- STPMU1_PWR_SW2,
- STPMU1_MAX_PWR_SW,
+ STPMIC1_PWR_SW1,
+ STPMIC1_PWR_SW2,
+ STPMIC1_MAX_PWR_SW,
};
-
#endif