add new board vl_ma2sc
* add support for board VL+MA2SC
* adds vl_ma2sc_config for standard NOR boot configuration
* adds vl_ma2sc_ram_config for RAM load configuration
Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h
new file mode 100644
index 0000000..24f89c9
--- /dev/null
+++ b/include/configs/vl_ma2sc.h
@@ -0,0 +1,463 @@
+/*
+ * (C) Copyright 2009-2012
+ * Jens Scharsig <esw@bus-elekronik.de>
+ * BuS Elektronik GmbH & Co. KG
+ *
+ * Configuation settings for the VL_MA2SC board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*--------------------------------------------------------------------------*/
+
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+#define CONFIG_ARM926EJS /* This is an ARM926EJS Core */
+#define CONFIG_AT91FAMILY
+#define CONFIG_AT91SAM9263 /* It's an Atmel AT91SAM9263 SoC*/
+#define CONFIG_VL_MA2SC /* on an VL_MA2SC Board */
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_MISC_INIT_R
+
+#include <asm/hardware.h>
+
+#define MACH_TYPE_VL_MA2SC 2412
+#define CONFIG_MACH_TYPE MACH_TYPE_VL_MA2SC
+
+#define CONFIG_SYS_DCACHE_OFF
+
+#ifdef CONFIG_RAMLOAD
+#define CONFIG_SYS_TEXT_BASE 0x21000000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x00000000
+#endif
+#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
+
+#define CONFIG_IDENT_STRING " on MiS Activ 2"
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AT91_GPIO
+
+#if !defined(CONFIG_SYS_USE_NANDFLASH) && !defined(CONFIG_RAMLOAD)
+#define CONFIG_SYS_USE_NORFLASH
+#define CONFIG_SYS_USE_BOOT_NORFLASH
+#endif
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
+/*
+ * Hardware drivers
+ */
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_WATCHDOG
+
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
+
+/* LCD */
+#define CONFIG_LCD
+#define CONFIG_ATMEL_LCD
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SYS_BLACK_ON_WHITE
+#define LCD_BPP LCD_COLOR8
+#define CONFIG_ATMEL_LCD_BGR555
+
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_LOADS
+
+#define CONFIG_CMD_BMP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MD5SUM
+#define CONFIG_CMD_SHA1SUM
+/*
+#define CONFIG_CMD_SPI
+*/
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_USB
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_MD5
+#define CONFIG_SHA1
+
+/*----------------------------------------------------------------------------
+ * Hardware confuguration
+ *---------------------------------------------------------------------------*/
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* UHP_BASE */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE
+#define CONFIG_AT91C_PQFP_UHPBUG
+
+/* I2C-Bus */
+
+#define CONFIG_SYS_I2C_SPEED 50000
+#define CONFIG_SYS_I2C_SLAVE 0 /* not used */
+
+#ifndef CONFIG_HARD_I2C
+#define CONFIG_SOFT_I2C
+
+/* Software I2C driver configuration */
+
+#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SPEED)
+
+#define AT91_PIN_SDA (1<<4) /* AT91C_PIO_PB4 */
+#define AT91_PIN_SCL (1<<5) /* AT91C_PIO_PB5 */
+
+#define I2C_INIT i2c_init_board();
+#define I2C_ACTIVE writel(AT91_PIN_SDA, &pio->piob.mddr);
+#define I2C_TRISTATE writel(AT91_PIN_SDA, &pio->piob.mder);
+#define I2C_READ ((readl(&pio->piob.pdsr) & AT91_PIN_SDA) != 0)
+#define I2C_SDA(bit) \
+ do { \
+ if (bit) \
+ writel(AT91_PIN_SDA, &pio->piob.sodr); \
+ else \
+ writel(AT91_PIN_SDA, &pio->piob.codr); \
+ } while (0);
+#define I2C_SCL(bit) \
+ do { \
+ if (bit) \
+ writel(AT91_PIN_SCL, &pio->piob.sodr); \
+ else \
+ writel(AT91_PIN_SCL, &pio->piob.codr); \
+ } while (0);
+#endif
+
+/* I2C-RTC */
+
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_DS1338
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+#endif
+
+/* EEPROM */
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+
+/* define PDC[31:16] as DATA[31:16] */
+#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000
+#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000
+
+/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
+#define CONFIG_SYS_MATRIX_EBI0CSA_VAL \
+ (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \
+ AT91_MATRIX_CSA_EBI_CS1A)
+
+/* user reset enable */
+#define CONFIG_SYS_RSTC_RMR_VAL \
+ (AT91_RSTC_KEY | \
+ AT91_RSTC_MR_URSTEN | \
+ AT91_RSTC_MR_ERSTL(15))
+
+/* Disable Watchdog */
+#define CONFIG_SYS_WDTC_WDMR_VAL \
+ (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \
+ AT91_WDT_MR_WDV(0xFFF) | \
+ AT91_WDT_MR_WDDIS | \
+ AT91_WDT_MR_WDD(0xFFF))
+
+/* clocks */
+
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */
+
+#define MHZ180
+#if defined(MHZ199)
+/* 199,8994 MHZ */
+#define MASTER_PLL_MUL 911
+#define MASTER_PLL_DIV 56
+#define MASTER_PLL_OUT 2
+#elif defined(MHZ180)
+/* 180 MHZ */
+#define MASTER_PLL_MUL 1875
+#define MASTER_PLL_DIV 128
+#define MASTER_PLL_OUT 2
+#elif defined(MHZTEST)
+/* Test MHZ */
+#define CONFIG_DISPLAY_CPUINFO
+#define MASTER_PLL_MUL 8
+#define MASTER_PLL_DIV 1
+#define MASTER_PLL_OUT 2
+#else
+/* 176.9472 MHZ */
+#define MASTER_PLL_MUL 72
+#define MASTER_PLL_DIV 5
+#define MASTER_PLL_OUT 2
+#endif
+
+#define CONFIG_SYS_MOR_VAL \
+ (AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255))
+
+#define CONFIG_SYS_PLLAR_VAL \
+ (AT91_PMC_PLLAR_29 | \
+ AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) | \
+ AT91_PMC_PLLXR_PLLCOUNT(63) | \
+ AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) | \
+ AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV))
+
+/* PCK/2 = MCK Master Clock from PLLA */
+#define CONFIG_SYS_MCKR1_VAL \
+ (AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 | \
+ AT91_PMC_MCKR_MDIV_2)
+
+/* PCK/2 = MCK Master Clock from PLLA */
+#define CONFIG_SYS_MCKR2_VAL \
+ (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | \
+ AT91_PMC_MCKR_MDIV_2)
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x20000000
+#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+#define CONFIG_SYS_INIT_SP_ADDR 0x00504000 /* use internal SRAM0 */
+
+#define CONFIG_SYS_SDRC_MR_VAL1 0
+#define CONFIG_SYS_SDRC_TR_VAL1 700
+#define CONFIG_SYS_SDRC_CR_VAL \
+ (AT91_SDRAMC_NC_9 | \
+ AT91_SDRAMC_NR_13 | \
+ AT91_SDRAMC_NB_4 | \
+ AT91_SDRAMC_CAS_3 | \
+ AT91_SDRAMC_DBW_32 | \
+ (2 << 8) | /* Write Recovery Delay */ \
+ (7 << 12) | /* Row Cycle Delay */ \
+ (2 << 16) | /* Row Precharge Delay */ \
+ (2 << 20) | /* Row to Column Delay */ \
+ (5 << 24) | /* Active to Precharge Delay */ \
+ (8 << 28)) /* Exit Self Refresh to Active Delay */
+
+#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM
+#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE
+#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH
+#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR
+#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL
+#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */
+#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */
+
+/* NOR flash */
+
+#define CONFIG_FLASH_SHOW_PROGRESS 45
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define PHYS_FLASH_1 0x10000000
+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_SECT 256
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000)
+
+/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
+#define CONFIG_SYS_SMC0_SETUP0_VAL \
+ (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \
+ AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
+#define CONFIG_SYS_SMC0_PULSE0_VAL \
+ (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \
+ AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
+#define CONFIG_SYS_SMC0_CYCLE0_VAL \
+ (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
+#define CONFIG_SYS_SMC0_MODE0_VAL \
+ (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \
+ AT91_SMC_MODE_DBW_16 | \
+ AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6))
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_DBW_8 1
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* our CLE is AD22 */
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTB, 0
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+#endif
+
+/* Ethernet */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_MULTI
+#define CONFIG_NET_RETRY_COUNT 5
+
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+
+#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
+
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END 0x21e00000
+
+/* Address and size of Primary Environment Sector */
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SIZE 0x20000
+#else
+#define CONFIG_ENV_SIZE 0x2000
+#endif
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {312500, 230400, 115200, 19200, \
+ 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN \
+ ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+
+#ifndef CONFIG_RAMLOAD
+#define CONFIG_BOOTCOMMAND "run nfsboot"
+#endif
+#define CONFIG_BOOT_RETRY_TIME -1
+#define CONFIG_BOOT_RETRY_MIN 15
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "dhcp $(copy_addr) $(kernelname);" \
+ "run bootargsdefaults;" \
+ "set bootargs $(bootargs) boot=nfs " \
+ ";echo $(bootargs)" \
+ ";bootm"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "ubootaddr=10000000\0" \
+ "splashimage=10080000\0" \
+ "kerneladdr=100A0000\0" \
+ "kernelsize=00800000\0" \
+ "minifsaddr=108A0000\0" \
+ "minifssize=00060000\0" \
+ "rootfsaddr=10900000\0" \
+ "copy_addr=20200000\0" \
+ "rootfssize=01700000\0" \
+ "kernelname=uImage_vl_ma2sc\0" \
+ "bootargsdefaults=set bootargs " \
+ "console=ttyS0,115200 " \
+ "video=atmel_lcdfb " \
+ "mem=62M " \
+ "panic=10 " \
+ "boardrevison=\\\"${revision}\\\" " \
+ "uboot=\\\"${ver}\\\" " \
+ "\0" \
+ "update_all=run update_kernel;run update_root;" \
+ "run update_splash; run update_uboot\0" \
+ "update_kernel=protect off $(kerneladdr) +$(kernelsize);" \
+ "dhcp $(copy_addr) $(kernelname);" \
+ "erase $(kerneladdr) +$(kernelsize);" \
+ "cp.b $(fileaddr) $(kerneladdr) $(filesize);" \
+ "protect on $(kerneladdr) +$(kernelsize)" \
+ "\0" \
+ "update_root=protect off $(rootfsaddr) +$(rootfssize);" \
+ "dhcp $(copy_addr) vl_ma2sc.root;" \
+ "erase $(rootfsaddr) +$(rootfssize);" \
+ "cp.b $(fileaddr) $(rootfsaddr) $(filesize);" \
+ "\0" \
+ "update_splash=protect off $(splashimage) +20000;" \
+ "dhcp $(copy_addr) splash_vl_ma2sc.bmp;" \
+ "erase $(splashimage) +20000;" \
+ "cp.b $(fileaddr) 10080000 $(filesize);" \
+ "protect on $(splashimage) +20000\0" \
+ "update_uboot=protect off 10000000 1005FFFF;" \
+ "dhcp $(copy_addr) u-boot_vl_ma2sc;" \
+ "erase 10000000 1005FFFF;" \
+ "cp.b $(fileaddr) $(ubootaddr) $(filesize);" \
+ "protect on 10000000 1005FFFF;reset\0" \
+ "emergency=run bootargsdefaults;" \
+ "set bootargs $(bootargs) root=initramfs boot=emergency " \
+ ";bootm $(kerneladdr)\0" \
+ "netemergency=run bootargsdefaults;" \
+ "dhcp $(copy_addr) $(kernelname);" \
+ "set bootargs $(bootargs) root=initramfs boot=emergency " \
+ ";bootm $(copy_addr)\0" \
+ "norboot=run bootargsdefaults;" \
+ "set bootargs $(bootargs) root=initramfs boot=local quiet " \
+ ";bootm $(kerneladdr)\0" \
+ "nandboot=run bootargsdefaults;" \
+ "set bootargs $(bootargs) root=initramfs boot=nand " \
+ ";bootm $(kerneladdr)\0" \
+ "setnorboot=set bootcmd 'run norboot'; set bootdelay 1;save\0" \
+ "clearenv=protect off 10060000 1007FFFF;" \
+ "erase 10060000 1007FFFF;reset\0" \
+ " "
+
+/*--------------------------------------------------------------------------*/
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif