MIPS: add support for Broadcom MIPS BCM6368 SoC family
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
diff --git a/arch/mips/dts/brcm,bcm6368.dtsi b/arch/mips/dts/brcm,bcm6368.dtsi
new file mode 100644
index 0000000..1bb538a
--- /dev/null
+++ b/arch/mips/dts/brcm,bcm6368.dtsi
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dt-bindings/clock/bcm6368-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/bcm6368-reset.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "brcm,bcm6368";
+
+ aliases {
+ spi0 = &spi;
+ };
+
+ cpus {
+ reg = <0x10000000 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ u-boot,dm-pre-reloc;
+
+ cpu@0 {
+ compatible = "brcm,bcm6368-cpu", "mips,mips4Kc";
+ device_type = "cpu";
+ reg = <0>;
+ u-boot,dm-pre-reloc;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bcm6368-cpu", "mips,mips4Kc";
+ device_type = "cpu";
+ reg = <1>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ u-boot,dm-pre-reloc;
+
+ periph_osc: periph-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ u-boot,dm-pre-reloc;
+ };
+
+ periph_clk: periph-clk {
+ compatible = "brcm,bcm6345-clk";
+ reg = <0x10000004 0x4>;
+ #clock-cells = <1>;
+ };
+ };
+
+ pflash: nor@18000000 {
+ compatible = "cfi-flash";
+ reg = <0x18000000 0x2000000>;
+ bank-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ status = "disabled";
+ };
+
+ ubus {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ u-boot,dm-pre-reloc;
+
+ pll_cntl: syscon@10000008 {
+ compatible = "syscon";
+ reg = <0x10000008 0x4>;
+ };
+
+ syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pll_cntl>;
+ offset = <0x0>;
+ mask = <0x1>;
+ };
+
+ periph_rst: reset-controller@10000010 {
+ compatible = "brcm,bcm6345-reset";
+ reg = <0x10000010 0x4>;
+ #reset-cells = <1>;
+ };
+
+ wdt: watchdog@1000005c {
+ compatible = "brcm,bcm6345-wdt";
+ reg = <0x1000005c 0xc>;
+ clocks = <&periph_osc>;
+ };
+
+ wdt-reboot {
+ compatible = "wdt-reboot";
+ wdt = <&wdt>;
+ };
+
+ gpio1: gpio-controller@10000080 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x10000080 0x4>, <0x10000088 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <6>;
+
+ status = "disabled";
+ };
+
+ gpio0: gpio-controller@10000084 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x10000084 0x4>, <0x1000008c 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ status = "disabled";
+ };
+
+ leds: led-controller@100000d0 {
+ compatible = "brcm,bcm6358-leds";
+ reg = <0x100000d0 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ uart0: serial@10000100 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000100 0x18>;
+ clocks = <&periph_osc>;
+
+ status = "disabled";
+ };
+
+ uart1: serial@10000120 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000120 0x18>;
+ clocks = <&periph_osc>;
+
+ status = "disabled";
+ };
+
+ spi: spi@10000800 {
+ compatible = "brcm,bcm6358-spi";
+ reg = <0x10000800 0x70c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&periph_clk BCM6368_CLK_SPI>;
+ resets = <&periph_rst BCM6368_RST_SPI>;
+ spi-max-frequency = <20000000>;
+ num-cs = <6>;
+
+ status = "disabled";
+ };
+
+ memory-controller@10001200 {
+ compatible = "brcm,bcm6358-mc";
+ reg = <0x10001200 0x4c>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+};
diff --git a/arch/mips/mach-bmips/Kconfig b/arch/mips/mach-bmips/Kconfig
index db8b405..4438c62 100644
--- a/arch/mips/mach-bmips/Kconfig
+++ b/arch/mips/mach-bmips/Kconfig
@@ -10,6 +10,7 @@
default "bcm6338" if SOC_BMIPS_BCM6338
default "bcm6348" if SOC_BMIPS_BCM6348
default "bcm6358" if SOC_BMIPS_BCM6358
+ default "bcm6368" if SOC_BMIPS_BCM6368
default "bcm63268" if SOC_BMIPS_BCM63268
choice
@@ -70,6 +71,17 @@
help
This supports BMIPS BCM6358 family including BCM6358 and BCM6359.
+config SOC_BMIPS_BCM6368
+ bool "BMIPS BCM6368 family"
+ select SUPPORTS_BIG_ENDIAN
+ select SUPPORTS_CPU_MIPS32_R1
+ select MIPS_TUNE_4KC
+ select MIPS_L1_CACHE_SHIFT_4
+ select SWAP_IO_SPACE
+ select SYSRESET_SYSCON
+ help
+ This supports BMIPS BCM6368 family including BCM6368 and BCM6369.
+
config SOC_BMIPS_BCM63268
bool "BMIPS BCM63268 family"
select SUPPORTS_BIG_ENDIAN