edid: Add HDMI flag to timing info
Some DVI monitors don't show anything in HDMI mode since audio stream
confuses them. To solve this situation, this commit adds HDMI flag in
timing data and sets it accordingly during edid parsing.
First existence of extension block is checked. If it exists and it is
CEA861 extension, then data blocks are checked for presence of HDMI
vendor specific data block. If it is present, HDMI flag is set.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/include/edid.h b/include/edid.h
index 8b022fa..a9f2f3d 100644
--- a/include/edid.h
+++ b/include/edid.h
@@ -19,6 +19,9 @@
#define EDID_SIZE 128
#define EDID_EXT_SIZE 256
+/* OUI of HDMI vendor specific data block */
+#define HDMI_IEEE_OUI 0x000c03
+
#define GET_BIT(_x, _pos) \
(((_x) >> (_pos)) & 1)
#define GET_BITS(_x, _pos_msb, _pos_lsb) \
@@ -234,6 +237,13 @@
unsigned char checksum;
} __attribute__ ((__packed__));
+enum edid_cea861_db_types {
+ EDID_CEA861_DB_AUDIO = 0x01,
+ EDID_CEA861_DB_VIDEO = 0x02,
+ EDID_CEA861_DB_VENDOR = 0x03,
+ EDID_CEA861_DB_SPEAKER = 0x04,
+};
+
struct edid_cea861_info {
unsigned char extension_tag;
#define EDID_CEA861_EXTENSION_TAG 0x02
@@ -251,6 +261,10 @@
#define EDID_CEA861_DTD_COUNT(_x) \
GET_BITS(((_x).dtd_count), 3, 0)
unsigned char data[124];
+#define EDID_CEA861_DB_TYPE(_x, offset) \
+ GET_BITS((_x).data[offset], 7, 5)
+#define EDID_CEA861_DB_LEN(_x, offset) \
+ GET_BITS((_x).data[offset], 4, 0)
} __attribute__ ((__packed__));
/**
diff --git a/include/fdtdec.h b/include/fdtdec.h
index b0e5b27..3000ecb 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -967,6 +967,7 @@
struct timing_entry vsync_len; /* ver. sync len */
enum display_flags flags; /* display flags */
+ bool hdmi_monitor; /* is hdmi monitor? */
};
/**