dwc3-generic: Handle the PHYs, the clocks and the reset lines
This make the driver more generic. At this point this driver can replace
the dwc3-of-simple implementation.
Make the description in the Kconfig more generic too.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c
index 7375660..7be0187 100644
--- a/drivers/usb/dwc3/dwc3-generic.c
+++ b/drivers/usb/dwc3/dwc3-generic.c
@@ -11,58 +11,85 @@
#include <dm.h>
#include <dm/device-internal.h>
#include <dm/lists.h>
-#include <linux/usb/otg.h>
-#include <linux/compat.h>
+#include <dwc3-uboot.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <malloc.h>
#include <usb.h>
#include "core.h"
#include "gadget.h"
-#include "linux-compat.h"
+#include <reset.h>
+#include <clk.h>
#if CONFIG_IS_ENABLED(DM_USB_GADGET)
+struct dwc3_generic_peripheral {
+ struct dwc3 dwc3;
+ struct phy *phys;
+ int num_phys;
+ fdt_addr_t base;
+};
+
int dm_usb_gadget_handle_interrupts(struct udevice *dev)
{
- struct dwc3 *priv = dev_get_priv(dev);
+ struct dwc3_generic_peripheral *priv = dev_get_priv(dev);
+ struct dwc3 *dwc3 = &priv->dwc3;
- dwc3_gadget_uboot_handle_interrupt(priv);
+ dwc3_gadget_uboot_handle_interrupt(dwc3);
return 0;
}
static int dwc3_generic_peripheral_probe(struct udevice *dev)
{
- struct dwc3 *priv = dev_get_priv(dev);
+ int rc;
+ struct dwc3_generic_peripheral *priv = dev_get_priv(dev);
+ struct dwc3 *dwc3 = &priv->dwc3;
- return dwc3_init(priv);
+ rc = dwc3_setup_phy(dev, &priv->phys, &priv->num_phys);
+ if (rc)
+ return rc;
+
+ dwc3->regs = map_physmem(priv->base, DWC3_OTG_REGS_END, MAP_NOCACHE);
+ dwc3->regs += DWC3_GLOBALS_REGS_START;
+ dwc3->dev = dev;
+
+ rc = dwc3_init(dwc3);
+ if (rc) {
+ unmap_physmem(dwc3->regs, MAP_NOCACHE);
+ return rc;
+ }
+
+ return 0;
}
static int dwc3_generic_peripheral_remove(struct udevice *dev)
{
- struct dwc3 *priv = dev_get_priv(dev);
+ struct dwc3_generic_peripheral *priv = dev_get_priv(dev);
+ struct dwc3 *dwc3 = &priv->dwc3;
- dwc3_remove(priv);
+ dwc3_remove(dwc3);
+ dwc3_shutdown_phy(dev, priv->phys, priv->num_phys);
+ unmap_physmem(dwc3->regs, MAP_NOCACHE);
return 0;
}
static int dwc3_generic_peripheral_ofdata_to_platdata(struct udevice *dev)
{
- struct dwc3 *priv = dev_get_priv(dev);
+ struct dwc3_generic_peripheral *priv = dev_get_priv(dev);
+ struct dwc3 *dwc3 = &priv->dwc3;
int node = dev_of_offset(dev);
- priv->regs = (void *)devfdt_get_addr(dev);
- priv->regs += DWC3_GLOBALS_REGS_START;
+ priv->base = devfdt_get_addr(dev);
- priv->maximum_speed = usb_get_maximum_speed(node);
- if (priv->maximum_speed == USB_SPEED_UNKNOWN) {
+ dwc3->maximum_speed = usb_get_maximum_speed(node);
+ if (dwc3->maximum_speed == USB_SPEED_UNKNOWN) {
pr_err("Invalid usb maximum speed\n");
return -ENODEV;
}
- priv->dr_mode = usb_get_dr_mode(node);
- if (priv->dr_mode == USB_DR_MODE_UNKNOWN) {
+ dwc3->dr_mode = usb_get_dr_mode(node);
+ if (dwc3->dr_mode == USB_DR_MODE_UNKNOWN) {
pr_err("Invalid usb mode setup\n");
return -ENODEV;
}
@@ -76,12 +103,16 @@
.ofdata_to_platdata = dwc3_generic_peripheral_ofdata_to_platdata,
.probe = dwc3_generic_peripheral_probe,
.remove = dwc3_generic_peripheral_remove,
- .platdata_auto_alloc_size = sizeof(struct usb_platdata),
- .priv_auto_alloc_size = sizeof(struct dwc3),
+ .priv_auto_alloc_size = sizeof(struct dwc3_generic_peripheral),
};
#endif
-static int dwc3_generic_bind(struct udevice *parent)
+struct dwc3_glue_data {
+ struct clk_bulk clks;
+ struct reset_ctl_bulk resets;
+};
+
+static int dwc3_glue_bind(struct udevice *parent)
{
const void *fdt = gd->fdt_blob;
int node;
@@ -92,29 +123,32 @@
const char *name = fdt_get_name(fdt, node, NULL);
enum usb_dr_mode dr_mode;
struct udevice *dev;
- const char *driver;
+ const char *driver = NULL;
debug("%s: subnode name: %s\n", __func__, name);
- if (strncmp(name, "dwc3@", 4))
- continue;
dr_mode = usb_get_dr_mode(node);
switch (dr_mode) {
case USB_DR_MODE_PERIPHERAL:
case USB_DR_MODE_OTG:
+#if CONFIG_IS_ENABLED(DM_USB_GADGET)
debug("%s: dr_mode: OTG or Peripheral\n", __func__);
driver = "dwc3-generic-peripheral";
+#endif
break;
case USB_DR_MODE_HOST:
debug("%s: dr_mode: HOST\n", __func__);
- driver = "dwc3-generic-host";
+ driver = "xhci-dwc3";
break;
default:
debug("%s: unsupported dr_mode\n", __func__);
return -ENODEV;
};
+ if (!driver)
+ continue;
+
ret = device_bind_driver_to_node(parent, driver, name,
offset_to_ofnode(node), &dev);
if (ret) {
@@ -127,7 +161,76 @@
return 0;
}
-static const struct udevice_id dwc3_generic_ids[] = {
+static int dwc3_glue_reset_init(struct udevice *dev,
+ struct dwc3_glue_data *glue)
+{
+ int ret;
+
+ ret = reset_get_bulk(dev, &glue->resets);
+ if (ret == -ENOTSUPP)
+ return 0;
+ else if (ret)
+ return ret;
+
+ ret = reset_deassert_bulk(&glue->resets);
+ if (ret) {
+ reset_release_bulk(&glue->resets);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int dwc3_glue_clk_init(struct udevice *dev,
+ struct dwc3_glue_data *glue)
+{
+ int ret;
+
+ ret = clk_get_bulk(dev, &glue->clks);
+ if (ret == -ENOSYS)
+ return 0;
+ if (ret)
+ return ret;
+
+#if CONFIG_IS_ENABLED(CLK)
+ ret = clk_enable_bulk(&glue->clks);
+ if (ret) {
+ clk_release_bulk(&glue->clks);
+ return ret;
+ }
+#endif
+
+ return 0;
+}
+
+static int dwc3_glue_probe(struct udevice *dev)
+{
+ struct dwc3_glue_data *glue = dev_get_platdata(dev);
+ int ret;
+
+ ret = dwc3_glue_clk_init(dev, glue);
+ if (ret)
+ return ret;
+
+ ret = dwc3_glue_reset_init(dev, glue);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int dwc3_glue_remove(struct udevice *dev)
+{
+ struct dwc3_glue_data *glue = dev_get_platdata(dev);
+
+ reset_release_bulk(&glue->resets);
+
+ clk_release_bulk(&glue->clks);
+
+ return dm_scan_fdt_dev(dev);
+}
+
+static const struct udevice_id dwc3_glue_ids[] = {
{ .compatible = "xlnx,zynqmp-dwc3" },
{ }
};
@@ -135,6 +238,10 @@
U_BOOT_DRIVER(dwc3_generic_wrapper) = {
.name = "dwc3-generic-wrapper",
.id = UCLASS_MISC,
- .of_match = dwc3_generic_ids,
- .bind = dwc3_generic_bind,
+ .of_match = dwc3_glue_ids,
+ .bind = dwc3_glue_bind,
+ .probe = dwc3_glue_probe,
+ .remove = dwc3_glue_remove,
+ .platdata_auto_alloc_size = sizeof(struct dwc3_glue_data),
+
};