bootvx: x86: Make VxWorks EFI console driver happy
When booting from EFI BIOS, VxWorks bootloader stores the EFI GOP
framebuffer info at a pre-defined offset @ 0x6100. When VxWorks
kernel boots up, its EFI console driver tries to find such a block
and if the signature matches, the framebuffer information will be
used to initialize the driver.
However it is not necessary to prepare an EFI environment for
VxWorks's EFI console driver to function (eg: EFI loader in
U-Boot). If U-Boot has already initialized the graphics card and
set it to a VESA mode that is compatible with EFI GOP, we can
simply prepare such a block for VxWorks.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/cmd/elf.c b/cmd/elf.c
index decfd45..30c8458 100644
--- a/cmd/elf.c
+++ b/cmd/elf.c
@@ -20,6 +20,7 @@
#include <net.h>
#include <vxworks.h>
#ifdef CONFIG_X86
+#include <vbe.h>
#include <asm/e820.h>
#include <linux/linkage.h>
#endif
@@ -254,6 +255,8 @@
ulong base;
struct e820_info *info;
struct e820_entry *data;
+ struct efi_gop_info *gop;
+ struct vesa_mode_info *vesa = &mode_info.vesa;
#endif
/*
@@ -397,6 +400,22 @@
* available memory size for the kernel is insane.
*/
*(u32 *)(base + BOOT_IMAGE_SIZE_OFFSET) = 0;
+
+ /*
+ * Prepare compatible framebuffer information block.
+ * The VESA mode has to be 32-bit RGBA.
+ */
+ if (vesa->x_resolution && vesa->y_resolution) {
+ gop = (struct efi_gop_info *)(base + EFI_GOP_INFO_OFFSET);
+ gop->magic = EFI_GOP_INFO_MAGIC;
+ gop->info.version = 0;
+ gop->info.width = vesa->x_resolution;
+ gop->info.height = vesa->y_resolution;
+ gop->info.pixel_format = EFI_GOT_RGBA8;
+ gop->info.pixels_per_scanline = vesa->bytes_per_scanline / 4;
+ gop->fb_base = vesa->phys_base_ptr;
+ gop->fb_size = vesa->bytes_per_scanline * vesa->y_resolution;
+ }
#endif
/*
diff --git a/include/vxworks.h b/include/vxworks.h
index 4a83a34..b1b5096 100644
--- a/include/vxworks.h
+++ b/include/vxworks.h
@@ -8,6 +8,8 @@
#ifndef _VXWORKS_H_
#define _VXWORKS_H_
+#include <efi_api.h>
+
/*
* Physical address of memory base for VxWorks x86
* This is LOCAL_MEM_LOCAL_ADRS in the VxWorks kernel configuration.
@@ -52,6 +54,30 @@
*/
#define BOOT_IMAGE_SIZE_OFFSET 0x5004
+/*
+ * When booting from EFI BIOS, VxWorks bootloader stores the EFI GOP
+ * framebuffer info at a pre-defined offset @ 0x6100. When VxWorks kernel
+ * boots up, its EFI console driver tries to find such a block and if
+ * the signature matches, the framebuffer information will be used to
+ * initialize the driver.
+ *
+ * However it is not necessary to prepare an EFI environment for VxWorks's
+ * EFI console driver to function (eg: EFI loader in U-Boot). If U-Boot has
+ * already initialized the graphics card and set it to a VESA mode that is
+ * compatible with EFI GOP, we can simply prepare such a block for VxWorks.
+ */
+#define EFI_GOP_INFO_OFFSET 0x6100
+
+/* EFI GOP info signatiure */
+#define EFI_GOP_INFO_MAGIC 0xfeedface
+
+struct efi_gop_info {
+ u32 magic; /* signature */
+ struct efi_gop_mode_info info; /* EFI GOP mode info structure */
+ phys_addr_t fb_base; /* framebuffer base address */
+ u32 fb_size; /* framebuffer size */
+};
+
int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
void boot_prep_vxworks(bootm_headers_t *images);
void boot_jump_vxworks(bootm_headers_t *images);