board: atmel: add sama5d27_wlsom1_ek board
Add support for the SAMA5D27-WLSOM1-EK. It's based on the Microchip
WireLess SoM which contains the SAMa5D27 LPDDR2 2Gbits SiP.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[eugen.hristev@microchip.com]: added u-boot specific dtsi and ported to 2019.10
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 62da168..5d88d99 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -727,6 +727,9 @@
dtb-$(CONFIG_TARGET_SAMA5D27_SOM1_EK) += \
at91-sama5d27_som1_ek.dtb
+dtb-$(CONFIG_TARGET_SAMA5D27_WLSOM1_EK) += \
+ at91-sama5d27_wlsom1_ek.dtb
+
dtb-$(CONFIG_TARGET_SAMA5D2_ICP) += \
at91-sama5d2_icp.dtb
diff --git a/arch/arm/dts/at91-sama5d27_wlsom1_ek-u-boot.dtsi b/arch/arm/dts/at91-sama5d27_wlsom1_ek-u-boot.dtsi
new file mode 100644
index 0000000..48ab217
--- /dev/null
+++ b/arch/arm/dts/at91-sama5d27_wlsom1_ek-u-boot.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1_ek-u-boot.dts - Device Tree file for SAMA5D27 WLSOM1 EK
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Eugen Hristev <eugen.hristev@microchip.com>
+ */
+
+/ {
+ chosen {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&sdmmc0 {
+ u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+};
+
+&sfr {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_sdmmc0_cmd_dat_default {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_sdmmc0_ck_cd_default {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart0_default {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/dts/at91-sama5d27_wlsom1_ek.dts
new file mode 100644
index 0000000..21986ec
--- /dev/null
+++ b/arch/arm/dts/at91-sama5d27_wlsom1_ek.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ */
+/dts-v1/;
+#include "sama5d27_wlsom1.dtsi"
+
+/ {
+ model = "Microchip SAMA5D27 WLSOM1 EK";
+ compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d2", "atmel,sama5";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ onewire_tm: onewire {
+ gpios = <&pioA PIN_PC9 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_onewire_tm_default>;
+ status = "okay";
+
+ w1_eeprom: w1_eeprom@0 {
+ compatible = "maxim,ds24b33";
+ status = "okay";
+ };
+ };
+
+ ahb {
+ sdmmc0: sdio-host@a0000000 {
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc0_cmd_dat_default &pinctrl_sdmmc0_ck_cd_default>;
+ status = "okay";
+ };
+
+ apb {
+ macb0: ethernet@f8008000 {
+ status = "okay";
+ };
+
+ uart0: serial@f801c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0_default>;
+ status = "okay";
+ };
+
+ pioA: gpio@fc038000 {
+ pinctrl {
+ pinctrl_sdmmc0_cmd_dat_default: sdmmc0_cmd_dat_default {
+ pinmux = <PIN_PA1__SDMMC0_CMD>,
+ <PIN_PA2__SDMMC0_DAT0>,
+ <PIN_PA3__SDMMC0_DAT1>,
+ <PIN_PA4__SDMMC0_DAT2>,
+ <PIN_PA5__SDMMC0_DAT3>;
+ bias-disable;
+ };
+
+ pinctrl_sdmmc0_ck_cd_default: sdmmc0_ck_cd_default {
+ pinmux = <PIN_PA0__SDMMC0_CK>,
+ <PIN_PA11__SDMMC0_VDDSEL>,
+ <PIN_PA12__SDMMC0_WP>,
+ <PIN_PA13__SDMMC0_CD>;
+ bias-disable;
+ };
+
+ pinctrl_uart0_default: uart0_default {
+ pinmux = <PIN_PB26__URXD0>,
+ <PIN_PB27__UTXD0>;
+ bias-disable;
+ };
+
+ pinctrl_onewire_tm_default: onewire_tm_default {
+ pinmux = <PIN_PC9__GPIO>;
+ bias-pull-up;
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/dts/sama5d27_wlsom1.dtsi b/arch/arm/dts/sama5d27_wlsom1.dtsi
new file mode 100644
index 0000000..3d27570
--- /dev/null
+++ b/arch/arm/dts/sama5d27_wlsom1.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d27_wlsom1.dtsi - Device Tree file for SAMA5D27 WLSOM1
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+/ {
+ model = "Microchip SAMA5D27 WLSOM1";
+ compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d2", "atmel,sama5";
+
+ memory {
+ reg = <0x20000000 0x10000000>;
+ };
+
+ ahb {
+ apb {
+ macb0: ethernet@f8008000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+ phy-mode = "rmii";
+
+ ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+
+ pioA: gpio@fc038000 {
+ pinctrl {
+ pinctrl_macb0_phy_irq: macb0_phy_irq {
+ pinmux = <PIN_PB24__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_macb0_rmii: macb0_rmii {
+ pinmux = <PIN_PB14__GTXCK>,
+ <PIN_PB15__GTXEN>,
+ <PIN_PB16__GRXDV>,
+ <PIN_PB17__GRXER>,
+ <PIN_PB18__GRX0>,
+ <PIN_PB19__GRX1>,
+ <PIN_PB20__GTX0>,
+ <PIN_PB21__GTX1>,
+ <PIN_PB22__GMDC>,
+ <PIN_PB23__GMDIO>;
+ bias-disable;
+ };
+
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index c3b21b7..24994d4 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -180,6 +180,20 @@
processor-based SAMA5D2 MPU with up to 1 Gbit DDR2-SDRAM
in a single package.
+config TARGET_SAMA5D27_WLSOM1_EK
+ bool "SAMA5D27 WLSOM1 EK board"
+ select SAMA5D2
+ select BOARD_EARLY_INIT_F
+ select BOARD_LATE_INIT
+ select CPU_V7A
+ help
+ The SAMA5D27 WLSOM1 embeds SAMA5D2 SiP (System in Package),
+ a 64Mbit QSPI flash with Mac-address, KSZ8081 Phy. A wireless
+ module providing bluetooth and wifi is also embedded.
+ The SAMA5D2 SiP integrates the ARM Cortex-A5
+ processor-based SAMA5D2 MPU with 2 Gbit LPDDR2-SDRAM
+ in a single package.
+
config TARGET_SAMA5D2_ICP
bool "SAMA5D2 Industrial Connectivity Platform (ICP)"
select CPU_V7A
@@ -292,6 +306,7 @@
source "board/atmel/sama5d2_ptc_ek/Kconfig"
source "board/atmel/sama5d2_xplained/Kconfig"
source "board/atmel/sama5d27_som1_ek/Kconfig"
+source "board/atmel/sama5d27_wlsom1_ek/Kconfig"
source "board/atmel/sama5d2_icp/Kconfig"
source "board/atmel/sama5d3_xplained/Kconfig"
source "board/atmel/sama5d3xek/Kconfig"