Patch by Mathijs Haarman, 08 May 2003:
Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
diff --git a/doc/README.Purple b/doc/README.Purple
index c05e0ff..dc3e00d 100644
--- a/doc/README.Purple
+++ b/doc/README.Purple
@@ -7,22 +7,32 @@
------
|x |
| x|
- |x |
- | X|
+ |x |
+ | X|
------
Put the s3 switch into the following position:
- 1 0
+ 1 0
+ ------
+ | x |
+ | x |
+ | x|
+ | x|
+ ------
+
+ Put the s4 switch into the following position:
+
+ 1 0
------
|x |
|x |
- |x |
+ |x |
|x |
|x |
| x|
| x|
- |x |
+ |x |
------
2. Connect to the serial console and to the BDI. Power on. On the
@@ -54,8 +64,8 @@
------
| x|
| x|
- |x |
- | X|
+ |x |
+ | X|
------
Power on. U-Boot should come up.