power: rk808: rename to rk8xx
Since this driver can be used for rk8xx series pmic,
let's rename rk808 to rk8xx, to make it clear.
Configs parts are done by sed -i "s/RK808/RK8XX/g" `grep RK808 -lr ./`
Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
index 4891b17..3f50c12 100644
--- a/drivers/power/pmic/Kconfig
+++ b/drivers/power/pmic/Kconfig
@@ -28,7 +28,7 @@
This allows PMICs to support child devices (such as regulators) in
SPL. This adds quite a bit of code so if you are not using this
feature you can turn it off. In this case you may need a 'back door'
- to call your regulator code (e.g. see rk808.c for direct functions
+ to call your regulator code (e.g. see rk8xx.c for direct functions
for use in SPL).
config PMIC_ACT8846
@@ -100,8 +100,8 @@
Driver binding info: doc/device-tree-bindings/pmic/pm8916.txt
-config PMIC_RK808
- bool "Enable support for Rockchip PMIC RK808"
+config PMIC_RK8XX
+ bool "Enable support for Rockchip PMIC RK8XX"
depends on DM_PMIC
---help---
The Rockchip RK808 PMIC provides four buck DC-DC convertors, 8 LDOs,
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index 5f1bef3..f409e3a 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -15,7 +15,7 @@
obj-$(CONFIG_PMIC_AS3722) += as3722.o
obj-$(CONFIG_PMIC_MAX8997) += max8997.o
obj-$(CONFIG_PMIC_PM8916) += pm8916.o
-obj-$(CONFIG_PMIC_RK808) += rk808.o
+obj-$(CONFIG_PMIC_RK8XX) += rk8xx.o
obj-$(CONFIG_PMIC_RN5T567) += rn5t567.o
obj-$(CONFIG_PMIC_TPS65090) += tps65090.o
obj-$(CONFIG_PMIC_S5M8767) += s5m8767.o
diff --git a/drivers/power/pmic/rk808.c b/drivers/power/pmic/rk8xx.c
similarity index 65%
rename from drivers/power/pmic/rk808.c
rename to drivers/power/pmic/rk8xx.c
index 582e456..394e2ff 100644
--- a/drivers/power/pmic/rk808.c
+++ b/drivers/power/pmic/rk8xx.c
@@ -10,24 +10,24 @@
#include <errno.h>
#include <fdtdec.h>
#include <libfdt.h>
-#include <power/rk808_pmic.h>
+#include <power/rk8xx_pmic.h>
#include <power/pmic.h>
DECLARE_GLOBAL_DATA_PTR;
static const struct pmic_child_info pmic_children_info[] = {
- { .prefix = "DCDC_REG", .driver = "rk808_buck"},
- { .prefix = "LDO_REG", .driver = "rk808_ldo"},
- { .prefix = "SWITCH_REG", .driver = "rk808_switch"},
+ { .prefix = "DCDC_REG", .driver = "rk8xx_buck"},
+ { .prefix = "LDO_REG", .driver = "rk8xx_ldo"},
+ { .prefix = "SWITCH_REG", .driver = "rk8xx_switch"},
{ },
};
-static int rk808_reg_count(struct udevice *dev)
+static int rk8xx_reg_count(struct udevice *dev)
{
return RK808_NUM_OF_REGS;
}
-static int rk808_write(struct udevice *dev, uint reg, const uint8_t *buff,
+static int rk8xx_write(struct udevice *dev, uint reg, const uint8_t *buff,
int len)
{
int ret;
@@ -41,7 +41,7 @@
return 0;
}
-static int rk808_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
+static int rk8xx_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
{
int ret;
@@ -55,7 +55,7 @@
}
#if CONFIG_IS_ENABLED(PMIC_CHILDREN)
-static int rk808_bind(struct udevice *dev)
+static int rk8xx_bind(struct udevice *dev)
{
const void *blob = gd->fdt_blob;
int regulators_node;
@@ -80,39 +80,39 @@
}
#endif
-static int rk808_probe(struct udevice *dev)
+static int rk8xx_probe(struct udevice *dev)
{
- struct rk808_priv *priv = dev_get_priv(dev);
+ struct rk8xx_priv *priv = dev_get_priv(dev);
uint8_t msb, lsb;
/* read Chip variant */
- rk808_read(dev, ID_MSB, &msb, 1);
- rk808_read(dev, ID_LSB, &lsb, 1);
+ rk8xx_read(dev, ID_MSB, &msb, 1);
+ rk8xx_read(dev, ID_LSB, &lsb, 1);
priv->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK;
return 0;
}
-static struct dm_pmic_ops rk808_ops = {
- .reg_count = rk808_reg_count,
- .read = rk808_read,
- .write = rk808_write,
+static struct dm_pmic_ops rk8xx_ops = {
+ .reg_count = rk8xx_reg_count,
+ .read = rk8xx_read,
+ .write = rk8xx_write,
};
-static const struct udevice_id rk808_ids[] = {
+static const struct udevice_id rk8xx_ids[] = {
{ .compatible = "rockchip,rk808" },
{ .compatible = "rockchip,rk818" },
{ }
};
-U_BOOT_DRIVER(pmic_rk808) = {
- .name = "rk808 pmic",
+U_BOOT_DRIVER(pmic_rk8xx) = {
+ .name = "rk8xx pmic",
.id = UCLASS_PMIC,
- .of_match = rk808_ids,
+ .of_match = rk8xx_ids,
#if CONFIG_IS_ENABLED(PMIC_CHILDREN)
- .bind = rk808_bind,
+ .bind = rk8xx_bind,
#endif
- .probe = rk808_probe,
- .ops = &rk808_ops,
+ .probe = rk8xx_probe,
+ .ops = &rk8xx_ops,
};