bcm2835_wdt: support for the BCM2835/2836 watchdog
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
diff --git a/arch/arm/mach-bcm283x/reset.c b/arch/arm/mach-bcm283x/reset.c
index 685815c..b62cb8a 100644
--- a/arch/arm/mach-bcm283x/reset.c
+++ b/arch/arm/mach-bcm283x/reset.c
@@ -21,18 +21,33 @@
*/
#define BCM2835_WDOG_RSTS_RASPBERRYPI_HALT 0x555
+/* max ticks timeout */
+#define BCM2835_WDOG_MAX_TIMEOUT 0x000fffff
+
+#ifdef CONFIG_BCM2835_WDT
+extern void hw_watchdog_disable(void);
+#else
+void hw_watchdog_disable(void) {}
+#endif
+
__efi_runtime_data struct bcm2835_wdog_regs *wdog_regs =
(struct bcm2835_wdog_regs *)BCM2835_WDOG_PHYSADDR;
-void __efi_runtime reset_cpu(ulong addr)
+void __efi_runtime reset_cpu(ulong ticks)
{
- uint32_t rstc;
+ uint32_t rstc, timeout;
+
+ if (ticks == 0) {
+ hw_watchdog_disable();
+ timeout = RESET_TIMEOUT;
+ } else
+ timeout = ticks & BCM2835_WDOG_MAX_TIMEOUT;
rstc = readl(&wdog_regs->rstc);
rstc &= ~BCM2835_WDOG_RSTC_WRCFG_MASK;
rstc |= BCM2835_WDOG_RSTC_WRCFG_FULL_RESET;
- writel(BCM2835_WDOG_PASSWORD | RESET_TIMEOUT, &wdog_regs->wdog);
+ writel(BCM2835_WDOG_PASSWORD | timeout, &wdog_regs->wdog);
writel(BCM2835_WDOG_PASSWORD | rstc, &wdog_regs->rstc);
}
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index c99beed..82da9e5 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -23,6 +23,7 @@
#ifdef CONFIG_ARM64
#include <asm/armv8/mmu.h>
#endif
+#include <watchdog.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -455,6 +456,9 @@
int board_init(void)
{
+#ifdef CONFIG_HW_WATCHDOG
+ hw_watchdog_init();
+#endif
#ifndef CONFIG_PL01X_SERIAL
rpi_disable_inactive_uart();
#endif
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 2034e3c..bdaf5d4 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1,5 +1,17 @@
menu "Watchdog Timer Support"
+config HW_WATCHDOG
+ bool
+
+config BCM2835_WDT
+ bool "Enable BCM2835/2836 watchdog driver"
+ select HW_WATCHDOG
+ help
+ Say Y here to enable the BCM2835/2836 watchdog
+
+ This provides basic infrastructure to support BCM2835/2836 watchdog
+ hardware, with a max timeout of ~15secs.
+
config ULP_WATCHDOG
bool "i.MX7ULP watchdog"
help
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index dfc7fbd..8378601 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -18,3 +18,4 @@
obj-$(CONFIG_WDT) += wdt-uclass.o
obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o
obj-$(CONFIG_WDT_ASPEED) += ast_wdt.o
+obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c
new file mode 100644
index 0000000..6f753ae
--- /dev/null
+++ b/drivers/watchdog/bcm2835_wdt.c
@@ -0,0 +1,35 @@
+/*
+ * Watchdog driver for Broadcom BCM2835
+ *
+ * Copyright (C) 2017 Paolo Pisati <p.pisati@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <efi_loader.h>
+#include <asm/io.h>
+#include <asm/arch/wdog.h>
+
+#define SECS_TO_WDOG_TICKS(x) ((x) << 16)
+#define MAX_TIMEOUT 0xf /* ~15s */
+
+static __efi_runtime_data bool enabled = true;
+
+extern void reset_cpu(ulong ticks);
+
+void hw_watchdog_reset(void)
+{
+ if (enabled)
+ reset_cpu(SECS_TO_WDOG_TICKS(MAX_TIMEOUT));
+}
+
+void hw_watchdog_init(void)
+{
+ hw_watchdog_reset();
+}
+
+void __efi_runtime hw_watchdog_disable(void)
+{
+ enabled = false;
+}