ARM: dts: AM571x-IDK Initial Support

Add initial DTS support for AM571-IDK evm.

Signed-off-by: Schuyler Patton <spatton@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 8b2030f..1964d3d 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -141,7 +141,8 @@
 	dra72-evm-revc.dtb dra71-evm.dtb
 dtb-$(CONFIG_TARGET_AM57XX_EVM) += am57xx-beagle-x15.dtb \
 	am57xx-beagle-x15-revb1.dtb \
-	am572x-idk.dtb
+	am572x-idk.dtb	\
+	am571x-idk.dtb
 dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
 
 dtb-$(CONFIG_LS102XA) += ls1021a-qds-duart.dtb \
diff --git a/arch/arm/dts/am571x-idk.dts b/arch/arm/dts/am571x-idk.dts
new file mode 100644
index 0000000..ac69bb0
--- /dev/null
+++ b/arch/arm/dts/am571x-idk.dts
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra72x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am57xx-idk-common.dtsi"
+
+/ {
+	model = "TI AM5718 IDK";
+	compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		cpu0-led {
+			label = "status0:red:cpu0";
+			gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		usr0-led {
+			label = "status0:green:usr";
+			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		heartbeat-led {
+			label = "status0:blue:heartbeat";
+			gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		usr1-led {
+			label = "status1:red:usr";
+			gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		usr2-led {
+			label = "status1:green:usr";
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		mmc0-led {
+			label = "status1:blue:mmc0";
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	extcon_usb2: extcon_usb2 {
+	     compatible = "linux,extcon-usb-gpio";
+	     id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&ldo1_reg>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 0c9d724..797d7a4 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -857,6 +857,8 @@
 		return 0;
 	} else if (board_is_am572x_idk() && !strcmp(name, "am572x-idk")) {
 		return 0;
+	} else if (board_is_am571x_idk() && !strcmp(name, "am571x-idk")) {
+		return 0;
 	}
 
 	return -1;
diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
index f401a6e..7fd418f 100644
--- a/configs/am57xx_evm_defconfig
+++ b/configs/am57xx_evm_defconfig
@@ -50,7 +50,7 @@
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_OF_CONTROL=y
-CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am572x-idk"
+CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am572x-idk am571x-idk"
 CONFIG_DM=y
 # CONFIG_BLK is not set
 CONFIG_DM_GPIO=y