Cleanup for CMC_PU2 board
diff --git a/board/cmc_pu2/flash.c b/board/cmc_pu2/flash.c
index 6105d56..61f7dd6 100644
--- a/board/cmc_pu2/flash.c
+++ b/board/cmc_pu2/flash.c
@@ -29,6 +29,10 @@
#include <common.h>
+#ifndef CFG_ENV_ADDR
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#endif
+
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*
@@ -194,12 +198,12 @@
switch (addr[0] & 0xff) {
case (uchar)AMD_MANUFACT:
- printf ("Manufacturer: AMD (Spansion)\n");
+ debug ("Manufacturer: AMD (Spansion)\n");
info->flash_id = FLASH_MAN_AMD;
break;
case (uchar)INTEL_MANUFACT:
- printf ("Manufacturer: Intel (not supported yet)\n");
+ debug ("Manufacturer: Intel (not supported yet)\n");
info->flash_id = FLASH_MAN_INTEL;
break;
@@ -214,7 +218,7 @@
if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[1]) {
case AMD_ID_MIRROR:
- printf ("Mirror Bit flash: addr[14] = %08X addr[15] = %08X\n",
+ debug ("Mirror Bit flash: addr[14] = %08X addr[15] = %08X\n",
addr[14], addr[15]);
switch(addr[14] & 0xffff) {
@@ -225,7 +229,7 @@
info->sector_count = 0;
info->size = 0;
} else {
- printf ("Chip: S29GL064M-R6\n");
+ debug ("Chip: S29GL064M-R6\n");
info->flash_id += FLASH_S29GL064M;
info->sector_count = 128;
info->size = 0x00800000;
@@ -265,16 +269,16 @@
int flag, prot, sect, ssect, l_sect;
ulong start, now, last;
- printf ("flash_erase: first: %d last: %d\n", s_first, s_last);
+ debug ("flash_erase: first: %d last: %d\n", s_first, s_last);
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
} else {
printf ("- no sectors to erase\n");
- }
+ }
return 1;
- }
+ }
if ((info->flash_id == FLASH_UNKNOWN) ||
(info->flash_id > FLASH_AMD_COMP)) {
diff --git a/board/purple/u-boot.lds b/board/purple/u-boot.lds
index 270fbe8..6263dd0 100644
--- a/board/purple/u-boot.lds
+++ b/board/purple/u-boot.lds
@@ -64,9 +64,9 @@
.sdata : { *(.sdata) }
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
uboot_end_data = .;
num_got_entries = (__got_end - __got_start) >> 2;
diff --git a/cpu/at91rm9200/i2c.c b/cpu/at91rm9200/i2c.c
index c12d2dd..34a6f51 100644
--- a/cpu/at91rm9200/i2c.c
+++ b/cpu/at91rm9200/i2c.c
@@ -33,7 +33,7 @@
#include <at91rm9200_i2c.h>
-static int debug = 0;
+/* define DEBUG */
/*
* Poll the i2c status register until the specified bit is set.
@@ -79,15 +79,13 @@
twi->TWI_CR = AT91C_TWI_STOP;
/* Wait until transfer is finished */
if (!at91_poll_status(twi, AT91C_TWI_RXRDY)) {
- if (debug)
- printf("at91_i2c: timeout 1\n");
+ debug ("at91_i2c: timeout 1\n");
return 1;
}
*buf++ = twi->TWI_RHR;
}
if (!at91_poll_status(twi, AT91C_TWI_TXCOMP)) {
- if (debug)
- printf("at91_i2c: timeout 2\n");
+ debug ("at91_i2c: timeout 2\n");
return 1;
}
} else {
@@ -97,15 +95,13 @@
if (!length)
twi->TWI_CR = AT91C_TWI_STOP;
if (!at91_poll_status(twi, AT91C_TWI_TXRDY)) {
- if (debug)
- printf("at91_i2c: timeout 3\n");
+ debug ("at91_i2c: timeout 3\n");
return 1;
}
}
/* Wait until transfer is finished */
if (!at91_poll_status(twi, AT91C_TWI_TXCOMP)) {
- if (debug)
- printf("at91_i2c: timeout 4\n");
+ debug ("at91_i2c: timeout 4\n");
return 1;
}
}
@@ -190,7 +186,7 @@
/* Here, CKDIV = 1 and CHDIV=CLDIV ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */
twi->TWI_CWGR = AT91C_TWI_CKDIV1 | AT91C_TWI_CLDIV3 | (AT91C_TWI_CLDIV3 << 8);
- printf("Found AT91 i2c\n");
+ debug ("Found AT91 i2c\n");
return;
}
#endif /* CONFIG_HARD_I2C */
diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
index ff935be..e87e318 100644
--- a/include/configs/cmc_pu2.h
+++ b/include/configs/cmc_pu2.h
@@ -13,7 +13,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -38,7 +38,7 @@
#define AT91_SLOW_CLOCK 32768 /* slow clock */
#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
-#define CONFIG_CMC_PU2 1 /* on an CMC_PU2 Board */
+#define CONFIG_CMC_PU2 1 /* on an CMC_PU2 Board */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
@@ -58,7 +58,7 @@
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-#define CONFIG_BAUDRATE 9600
+#define CONFIG_BAUDRATE 9600
#define CFG_AT91C_BRGR_DIVISOR 450 /* hardcode so no __divsi3 : AT91C_MASTER_CLOCK /(baudrate * 16) */
@@ -78,11 +78,11 @@
#define CONFIG_HARD_I2C
#ifdef CONFIG_HARD_I2C
-#define CFG_I2C_SPEED 0 /* not used */
-#define CFG_I2C_SLAVE 0 /* not used */
-#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */
-#define CFG_I2C_RTC_ADDR 0x32
-#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_I2C_SPEED 0 /* not used */
+#define CFG_I2C_SLAVE 0 /* not used */
+#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */
+#define CFG_I2C_RTC_ADDR 0x32
+#define CFG_I2C_EEPROM_ADDR 0x50
#define CFG_I2C_EEPROM_ADDR_LEN 1
#define CFG_I2C_EEPROM_ADDR_OVERFLOW
#endif
@@ -90,44 +90,33 @@
#define CFG_LONGHELP
#define CONFIG_BOOTDELAY 3
-/* #define CONFIG_ENV_OVERWRITE 1 */
#ifdef CONFIG_HARD_I2C
#define CONFIG_COMMANDS \
- ((CONFIG_CMD_DFL | \
- CFG_CMD_I2C | \
- CFG_CMD_DATE | \
- CFG_CMD_EEPROM | \
- CFG_CMD_DHCP ) & \
- ~(CFG_CMD_BDI | \
- CFG_CMD_IMI | \
- CFG_CMD_AUTOSCRIPT | \
- CFG_CMD_FPGA | \
- CFG_CMD_MISC | \
- CFG_CMD_LOADS ))
+ ((CONFIG_CMD_DFL | \
+ CFG_CMD_I2C | \
+ CFG_CMD_DATE | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_DHCP ) & \
+ ~(CFG_CMD_FPGA | CFG_CMD_MISC) )
#else
#define CONFIG_COMMANDS \
- ((CONFIG_CMD_DFL | \
- CFG_CMD_DHCP ) & \
- ~(CFG_CMD_BDI | \
- CFG_CMD_IMI | \
- CFG_CMD_AUTOSCRIPT | \
- CFG_CMD_FPGA | \
- CFG_CMD_MISC | \
- CFG_CMD_LOADS ))
+ ((CONFIG_CMD_DFL | \
+ CFG_CMD_DHCP ) & \
+ ~(CFG_CMD_FPGA | CFG_CMD_MISC) )
+#define CONFIG_TIMESTAMP
#endif
-/* still about 20 kB free with this defined */
#define CFG_LONGHELP
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
-#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
-#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
+#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
+#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM 0x20000000
+#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */
#define CFG_MEMTEST_START PHYS_SDRAM
#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
@@ -138,34 +127,32 @@
#define CONFIG_HAS_DATAFLASH 1
#define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
-#define CFG_MAX_DATAFLASH_BANKS 2
-#define CFG_MAX_DATAFLASH_PAGES 16384
+#define CFG_MAX_DATAFLASH_BANKS 2
+#define CFG_MAX_DATAFLASH_PAGES 16384
#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
#define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
#define PHYS_FLASH_1 0x10000000
#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */
#define CFG_FLASH_BASE PHYS_FLASH_1
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
#define CFG_MAX_FLASH_BANKS 1
#define CFG_MAX_FLASH_SECT 256
#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) /* after u-boot.bin */
-#define CFG_ENV_SIZE 0x10000 /* sectors are 64K here */
+#define CFG_ENV_OFFSET 0x20000 /* after u-boot.bin */
+#define CFG_ENV_SECT_SIZE (64 << 10) /* sectors are 64 kB */
+#define CFG_ENV_SIZE (16 << 10) /* Use only 16 kB */
#define CFG_LOAD_ADDR 0x21000000 /* default load address */
-#define CFG_BOOT_SIZE 0x00 /* 0 KBytes */
-#define CFG_U_BOOT_BASE PHYS_FLASH_1
-#define CFG_U_BOOT_SIZE 0x20000 /* 128 KBytes */
+#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
-#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-
-#define CFG_PROMPT "cmc> " /* Monitor Command Prompt */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_MAXARGS 32 /* max number of command args */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#ifndef __ASSEMBLY__
@@ -179,13 +166,13 @@
struct bd_info_ext {
/* helper variable for board environment handling
*
- * env_crc_valid == 0 => uninitialised
- * env_crc_valid > 0 => environment crc in flash is valid
- * env_crc_valid < 0 => environment crc in flash is invalid
+ * env_crc_valid == 0 => uninitialised
+ * env_crc_valid > 0 => environment crc in flash is valid
+ * env_crc_valid < 0 => environment crc in flash is invalid
*/
int env_crc_valid;
};
-#endif
+#endif /* __ASSEMBLY__ */
#define CFG_HZ 1000
#define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */
@@ -197,4 +184,4 @@
#error CONFIG_USE_IRQ not supported
#endif
-#endif
+#endif /* __CONFIG_H */