drivers: serial: mcfuart: add DT support
This patch adds devicetree support to the mcfuart.c driver
and removes non DM code.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c
index 1371049..066e5a1 100644
--- a/drivers/serial/mcfuart.c
+++ b/drivers/serial/mcfuart.c
@@ -5,6 +5,9 @@
*
* Modified to add device model (DM) support
* (C) Copyright 2015 Angelo Dureghello <angelo@sysam.it>
+ *
+ * Modified to add DM and fdt support, removed non DM code
+ * (C) Copyright 2018 Angelo Dureghello <angelo@sysam.it>
*/
/*
@@ -78,83 +81,6 @@
writeb(UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED, &uart->ucr);
}
-#ifndef CONFIG_DM_SERIAL
-
-static int mcf_serial_init(void)
-{
- uart_t *uart_base;
- int port_idx;
-
- uart_base = (uart_t *)CONFIG_SYS_UART_BASE;
- port_idx = CONFIG_SYS_UART_PORT;
-
- return mcf_serial_init_common(uart_base, port_idx, gd->baudrate);
-}
-
-static void mcf_serial_putc(const char c)
-{
- uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
-
- if (c == '\n')
- serial_putc('\r');
-
- /* Wait for last character to go. */
- while (!(readb(&uart->usr) & UART_USR_TXRDY))
- ;
-
- writeb(c, &uart->utb);
-}
-
-static int mcf_serial_getc(void)
-{
- uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
-
- /* Wait for a character to arrive. */
- while (!(readb(&uart->usr) & UART_USR_RXRDY))
- ;
-
- return readb(&uart->urb);
-}
-
-static void mcf_serial_setbrg(void)
-{
- uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
-
- mcf_serial_setbrg_common(uart, gd->baudrate);
-}
-
-static int mcf_serial_tstc(void)
-{
- uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
-
- return readb(&uart->usr) & UART_USR_RXRDY;
-}
-
-static struct serial_device mcf_serial_drv = {
- .name = "mcf_serial",
- .start = mcf_serial_init,
- .stop = NULL,
- .setbrg = mcf_serial_setbrg,
- .putc = mcf_serial_putc,
- .puts = default_serial_puts,
- .getc = mcf_serial_getc,
- .tstc = mcf_serial_tstc,
-};
-
-void mcf_serial_initialize(void)
-{
- serial_register(&mcf_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &mcf_serial_drv;
-}
-
-#endif
-
-#ifdef CONFIG_DM_SERIAL
-
static int coldfire_serial_probe(struct udevice *dev)
{
struct coldfire_serial_platdata *plat = dev->platdata;
@@ -212,6 +138,23 @@
return 0;
}
+static int coldfire_ofdata_to_platdata(struct udevice *dev)
+{
+ struct coldfire_serial_platdata *plat = dev_get_platdata(dev);
+ fdt_addr_t addr_base;
+
+ addr_base = devfdt_get_addr(dev);
+ if (addr_base == FDT_ADDR_T_NONE)
+ return -ENODEV;
+
+ plat->base = (uint32_t)addr_base;
+
+ plat->port = dev->seq;
+ plat->baudrate = gd->baudrate;
+
+ return 0;
+}
+
static const struct dm_serial_ops coldfire_serial_ops = {
.putc = coldfire_serial_putc,
.pending = coldfire_serial_pending,
@@ -219,11 +162,18 @@
.setbrg = coldfire_serial_setbrg,
};
+static const struct udevice_id coldfire_serial_ids[] = {
+ { .compatible = "fsl,mcf-uart" },
+ { }
+};
+
U_BOOT_DRIVER(serial_coldfire) = {
.name = "serial_coldfire",
.id = UCLASS_SERIAL,
+ .of_match = coldfire_serial_ids,
+ .ofdata_to_platdata = coldfire_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct coldfire_serial_platdata),
.probe = coldfire_serial_probe,
.ops = &coldfire_serial_ops,
.flags = DM_FLAG_PRE_RELOC,
};
-#endif