tegra: Init clocks even when SPL did not run
At present early clock init happens in SPL. If SPL did not run (because
for example U-Boot is chain-loaded from another boot loader) then the
clocks are not set as U-Boot expects.
Add a function to detect this and call the early clock init in U-Boot
proper.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c
index 84f1ee5..1e627ba 100644
--- a/arch/arm/mach-tegra/board2.c
+++ b/arch/arm/mach-tegra/board2.c
@@ -191,6 +191,9 @@
int board_early_init_f(void)
{
+ if (!clock_early_init_done())
+ clock_early_init();
+
#if defined(CONFIG_TEGRA_DISCONNECT_UDC_ON_BOOT)
#define USBCMD_FS2 (1 << 15)
{
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index 3bb7233..76436d8 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -825,3 +825,8 @@
return 0;
}
+
+__weak bool clock_early_init_done(void)
+{
+ return true;
+}
diff --git a/arch/arm/mach-tegra/tegra124/clock.c b/arch/arm/mach-tegra/tegra124/clock.c
index 5e44061..5ae718b 100644
--- a/arch/arm/mach-tegra/tegra124/clock.c
+++ b/arch/arm/mach-tegra/tegra124/clock.c
@@ -891,6 +891,24 @@
udelay(2);
}
+/*
+ * clock_early_init_done - Check if clock_early_init() has been called
+ *
+ * Check a register that we set up to see if clock_early_init() has already
+ * been called.
+ *
+ * @return true if clock_early_init() was called, false if not
+ */
+bool clock_early_init_done(void)
+{
+ struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 val;
+
+ val = readl(&clkrst->crc_sclk_brst_pol);
+
+ return val == 0x20002222;
+}
+
void arch_timer_init(void)
{
struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE;