powerpc/86xx: Rename PCI1/2 to PCIE1/2 on MPC8641HPCN & SBC8641
The MPC8641 boards actually only have PCIE not PCI. Rename so we are
uniform with regards to names so we can replace this code with templated
code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c
index 1060f38..b1dda10 100644
--- a/board/sbc8641d/sbc8641d.c
+++ b/board/sbc8641d/sbc8641d.c
@@ -191,16 +191,16 @@
};
#endif
-static struct pci_controller pci1_hose = {
+static struct pci_controller pcie1_hose = {
#ifndef CONFIG_PCI_PNP
config_table:pci_mpc86xxcts_config_table
#endif
};
#endif /* CONFIG_PCI */
-#ifdef CONFIG_PCI2
-static struct pci_controller pci2_hose;
-#endif /* CONFIG_PCI2 */
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif /* CONFIG_PCIE2 */
int first_free_busno = 0;
@@ -212,10 +212,10 @@
uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL)
>> MPC8641_PORDEVSR_IO_SEL_SHIFT;
-#ifdef CONFIG_PCI1
+#ifdef CONFIG_PCIE1
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
- struct pci_controller *hose = &pci1_hose;
+ struct pci_controller *hose = &pcie1_hose;
struct pci_region *r = hose->regions;
#ifdef DEBUG
uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA)
@@ -236,16 +236,16 @@
/* outbound memory */
pci_set_region(r++,
- CONFIG_SYS_PCI1_MEM_BUS,
- CONFIG_SYS_PCI1_MEM_PHYS,
- CONFIG_SYS_PCI1_MEM_SIZE,
+ CONFIG_SYS_PCIE1_MEM_BUS,
+ CONFIG_SYS_PCIE1_MEM_PHYS,
+ CONFIG_SYS_PCIE1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
- CONFIG_SYS_PCI1_IO_BUS,
- CONFIG_SYS_PCI1_IO_PHYS,
- CONFIG_SYS_PCI1_IO_SIZE,
+ CONFIG_SYS_PCIE1_IO_BUS,
+ CONFIG_SYS_PCIE1_IO_PHYS,
+ CONFIG_SYS_PCIE1_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
@@ -264,26 +264,26 @@
}
#else
puts("PCI-EXPRESS1: Disabled\n");
-#endif /* CONFIG_PCI1 */
+#endif /* CONFIG_PCIE1 */
-#ifdef CONFIG_PCI2
+#ifdef CONFIG_PCIE2
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
- struct pci_controller *hose = &pci2_hose;
+ struct pci_controller *hose = &pcie2_hose;
struct pci_region *r = hose->regions;
/* outbound memory */
pci_set_region(r++,
- CONFIG_SYS_PCI2_MEM_BUS,
- CONFIG_SYS_PCI2_MEM_PHYS,
- CONFIG_SYS_PCI2_MEM_SIZE,
+ CONFIG_SYS_PCIE2_MEM_BUS,
+ CONFIG_SYS_PCIE2_MEM_PHYS,
+ CONFIG_SYS_PCIE2_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
- CONFIG_SYS_PCI2_IO_BUS,
- CONFIG_SYS_PCI2_IO_PHYS,
- CONFIG_SYS_PCI2_IO_SIZE,
+ CONFIG_SYS_PCIE2_IO_BUS,
+ CONFIG_SYS_PCIE2_IO_PHYS,
+ CONFIG_SYS_PCIE2_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
@@ -298,7 +298,7 @@
}
#else
puts("PCI-EXPRESS 2: Disabled\n");
-#endif /* CONFIG_PCI2 */
+#endif /* CONFIG_PCIE2 */
}
@@ -308,11 +308,11 @@
{
ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI1
- ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
+#ifdef CONFIG_PCIE1
+ ft_fsl_pci_setup(blob, "pci0", &pcie1_hose);
#endif
-#ifdef CONFIG_PCI2
- ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
+#ifdef CONFIG_PCIE2
+ ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
#endif
}
#endif