ARM: omap3_logic: Refactor Boot Environmental variables
Some scripts are calling the same functions, so these changes consolidate
common scripts together to reduce redundancy and shrink size a bit. This
also keeps the 'bootargs' variable from growing if manually called more
than one time. This also adds NAND booting scripts based on newly consolidated
scripts.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 71ae2be..90faaf4 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -148,62 +148,61 @@
"omapfb.rotate=${rotation}; " \
"fi\0" \
"optargs=ignore_loglevel early_printk no_console_suspend\0" \
- "addmtdparts=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "common_bootargs=setenv bootargs ${bootargs} " \
- "${optargs};" \
- "run addmtdparts; " \
+ "common_bootargs=run setconsole; setenv bootargs " \
+ "${bootargs} "\
+ "console=${console} " \
+ "${mtdparts} "\
+ "${optargs}; " \
"run vrfb_arg\0" \
"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
"bootscript=echo 'Running bootscript from mmc ...'; " \
"source ${loadaddr}\0" \
- "loaduimage=mmc rescan; " \
- "load mmc ${mmcdev} ${loadaddr} uImage\0" \
- "loadzimage=mmc rescan; " \
- "load mmc ${mmcdev} ${loadaddr} zImage\0" \
+ "loadimage=mmc rescan; " \
+ "load mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
"ramdisksize=64000\0" \
"ramdiskimage=rootfs.ext2.gz.uboot\0" \
"loadramdisk=mmc rescan; " \
"load mmc ${mmcdev} ${rdaddr} ${ramdiskimage}\0" \
- "ramargs=run setconsole; setenv bootargs console=${console} " \
+ "ramargs=setenv bootargs "\
"root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \
- "mmcargs=run setconsole; setenv bootargs console=${console} " \
- "${optargs} " \
- "root=${mmcroot} " \
- "rootfstype=${mmcrootfstype}\0" \
- "nandargs=run setconsole; setenv bootargs console=${console} " \
- "${optargs} " \
+ "mmcargs=setenv bootargs "\
+ "root=${mmcroot} rootfstype=${mmcrootfstype}\0" \
+ "nandargs=setenv bootargs "\
"root=${nandroot} " \
"rootfstype=${nandrootfstype}\0" \
- "nfsargs=run setconsole; setenv serverip ${tftpserver}; " \
- "setenv bootargs console=${console} root=/dev/nfs " \
+ "nfsargs=setenv serverip ${tftpserver}; " \
+ "setenv bootargs root=/dev/nfs " \
"nfsroot=${nfsrootpath} " \
"ip=${ipaddr}:${tftpserver}:${gatewayip}:${netmask}::eth0:off\0" \
"nfsrootpath=/opt/nfs-exports/omap\0" \
"autoload=no\0" \
"loadfdt=mmc rescan; " \
"load mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \
- "mmcbootz=echo Booting with DT from mmc${mmcdev} ...; " \
+ "mmcbootcommon=echo Booting with DT from mmc${mmcdev} ...; " \
"run mmcargs; " \
"run common_bootargs; " \
"run dump_bootargs; " \
- "run loadzimage; " \
- "run loadfdt; " \
+ "run loadimage; " \
+ "run loadfdt;\0 " \
+ "mmcbootz=setenv bootfile zImage; " \
+ "run mmcbootcommon; "\
"bootz ${loadaddr} - ${fdtaddr}\0" \
- "mmcramboot=echo 'Booting uImage kernel from mmc w/ramdisk...'; " \
+ "mmcboot=setenv bootfile uImage; "\
+ "run mmcbootcommon; "\
+ "bootm ${loadaddr} - ${fdtaddr}\0" \
+ "mmcrambootcommon=echo 'Booting kernel from MMC w/ramdisk...'; " \
"run ramargs; " \
"run common_bootargs; " \
"run dump_bootargs; " \
- "run loaduimage; " \
- "run loadramdisk; " \
- "bootm ${loadaddr} ${rdaddr}\0" \
- "mmcrambootz=echo 'Booting zImage kernel from mmc w/ramdisk...'; " \
- "run ramargs; " \
- "run common_bootargs; " \
- "run dump_bootargs; " \
- "run loadzimage; " \
- "run loadramdisk; " \
+ "run loadimage; " \
"run loadfdt; " \
- "bootz ${loadaddr} ${rdaddr} ${fdtaddr};\0" \
+ "run loadramdisk\0" \
+ "mmcramboot=setenv bootfile uImage; " \
+ "run mmcrambootcommon; " \
+ "bootm ${loadaddr} ${rdaddr} ${fdtimage}\0" \
+ "mmcrambootz=setenv bootfile zImage; " \
+ "run mmcrambootcommon; " \
+ "bootz ${loadaddr} ${rdaddr} ${fdtimage}\0" \
"tftpboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \
"run ramargs; " \
"run common_bootargs; " \
@@ -217,7 +216,18 @@
"run common_bootargs;" \
"run dump_bootargs;" \
"tftpboot $loadaddr zImage;" \
- "bootz $loadaddr\0"
+ "bootz $loadaddr\0" \
+ "nandbootcommon=echo 'Booting kernel from NAND...';" \
+ "nand unlock;" \
+ "run nandargs;" \
+ "run common_bootargs;" \
+ "run dump_bootargs;" \
+ "nand read ${loadaddr} kernel;" \
+ "nand read ${fdtaddr} spl-os;\0" \
+ "nandbootz=run nandbootcommon; "\
+ "bootz ${loadaddr} - ${fdtaddr}\0"\
+ "nandboot=run nandbootcommon; "\
+ "bootm ${loadaddr} - ${fdtaddr}\0"\
#define CONFIG_BOOTCOMMAND \
"run autoboot"