Initial revision
diff --git a/board/cray/L1/L1.c b/board/cray/L1/L1.c
new file mode 100644
index 0000000..f5dfba4
--- /dev/null
+++ b/board/cray/L1/L1.c
@@ -0,0 +1,302 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <405gp_i2c.h>
+#include <command.h>
+#include <cmd_nvedit.h>
+#include <cmd_bootm.h>
+#include <rtc.h>
+#include <net.h>
+#include <malloc.h>
+
+#define L1_MEMSIZE (32*1024*1024)
+
+/* the std. DHCP stufff */
+#define DHCP_ROUTER 3
+#define DHCP_NETMASK 1
+#define DHCP_BOOTFILE 67
+#define DHCP_ROOTPATH 17
+#define DHCP_HOSTNAME 12
+
+/* some extras used by CRAY
+ *
+ * on the server this looks like:
+ *
+ * option L1-initrd-image code 224 = string;
+ * option L1-initrd-image "/opt/craysv2/craymcu/l1/flash/initrd.image"
+ */
+#define DHCP_L1_INITRD 224
+
+/* new, [better?] way via official vendor-extensions, defining an option
+ * space.
+ * on the server this looks like:
+ *
+ * option space U-Boot;
+ * option U-Boot.initrd code 3 = string;
+ * option U-Boot.bootcmd code 4 = string;
+ * option U-Boot.bootflags code 5 = string;
+ * option U-Boot.rootdev code 6 = string;
+ */
+#define DHCP_VENDOR_SPECX 43
+#define DHCP_VX_INITRD 3
+#define DHCP_VX_BOOTCMD 4
+#define DHCP_VX_BOOTFLAGS 5
+#define DHCP_VX_ROOTDEV 6
+
+/* Things DHCP server can tellme about. If there's no flash address, then
+ * they dont participate in 'update' to flash, and we force their values
+ * back to '0' every boot to be sure to get them fresh from DHCP. Yes, I
+ * know this is a pain...
+ *
+ * If I get no bootfile, boot from flash. If rootpath, use that. If no
+ * rootpath use initrd in flash.
+ */
+typedef struct dhcp_item_s {
+ u8 dhcp_option;
+ u8 dhcp_vendor_option;
+ char *dhcpvalue;
+ char *envname;
+} dhcp_item_t;
+static dhcp_item_t Things[] = {
+ {DHCP_ROUTER, 0, NULL, "gateway"},
+ {DHCP_NETMASK, 0, NULL, "netmask"},
+ {DHCP_BOOTFILE, 0, NULL, "bootfile"},
+ {DHCP_ROOTPATH, 0, NULL, "rootpath"},
+ {DHCP_HOSTNAME, 0, NULL, "hostname"},
+ {DHCP_L1_INITRD, 0, NULL, "initrd"},
+/* and the other way.. */
+ {DHCP_VENDOR_SPECX, DHCP_VX_INITRD, NULL, "initrd"},
+ {DHCP_VENDOR_SPECX, DHCP_VX_BOOTCMD, NULL, "bootcmd"},
+ {DHCP_VENDOR_SPECX, DHCP_VX_BOOTFLAGS, NULL, NULL},
+ {DHCP_VENDOR_SPECX, DHCP_VX_ROOTDEV, NULL, NULL},
+};
+
+#define N_THINGS ((sizeof(Things))/(sizeof(dhcp_item_t)))
+
+static void init_ecc_sdram (void);
+
+/* ------------------------------------------------------------------------- */
+int board_pre_init (void)
+{
+ init_ecc_sdram ();
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (uicer, 0x00000000); /* disable all ints */
+ mtdcr (uiccr, 0x00000020); /* set all but FPGA SMI to be non-critical */
+ mtdcr (uicpr, 0xFFFFFFE0); /* set int polarities */
+ mtdcr (uictr, 0x10000000); /* set int trigger levels */
+ mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+int checkboard (void)
+{
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+int misc_init_r (void)
+{
+ unsigned char *s, *e;
+ image_header_t *hdr;
+ time_t timestamp;
+ struct rtc_time tm;
+
+ hdr = (image_header_t *) (CFG_MONITOR_BASE - sizeof (image_header_t));
+ timestamp = (time_t) hdr->ih_time;
+ to_tm (timestamp, &tm);
+ printf ("Welcome to U-Boot on Cray L1. Compiled %4d-%02d-%02d %2d:%02d:%02d (UTC)\n", tm.tm_year, tm.tm_mon, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec);
+
+#define FACTORY_SETTINGS 0xFFFC0000
+ if ((s = getenv ("ethaddr")) == NULL) {
+ e = (unsigned char *) (FACTORY_SETTINGS);
+ if (*(e + 0) != '0'
+ || *(e + 1) != '0'
+ || *(e + 2) != ':'
+ || *(e + 3) != '4' || *(e + 4) != '0' || *(e + 17) != '\0') {
+ printf ("No valid MAC address in flash location 0x3C0000!\n");
+ } else {
+ printf ("Factory MAC: %s\n", e);
+ setenv ("ethaddr", e);
+ }
+ }
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+long int initdram (int board_type)
+{
+ return (L1_MEMSIZE);
+}
+
+/* ------------------------------------------------------------------------- */
+/* stubs so we can print dates w/o any nvram RTC.*/
+void rtc_get (struct rtc_time *tmp)
+{
+ return;
+}
+void rtc_set (struct rtc_time *tmp)
+{
+ return;
+}
+void rtc_reset (void)
+{
+ return;
+}
+
+/* ------------------------------------------------------------------------- */
+/* Do sdram bank init in C so I can read it..
+ */
+static void init_ecc_sdram (void)
+{
+ unsigned long tmp, *p;
+
+ /* write SDRAM bank 0 register */
+ mtdcr (memcfga, mem_mb0cf);
+ mtdcr (memcfgd, 0x00062001);
+
+/* Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR. */
+/* To set the appropriate timings, we need to know the SDRAM speed. */
+/* We can use the PLB speed since the SDRAM speed is the same as */
+/* the PLB speed. The PLB speed is the FBK divider times the */
+/* 405GP reference clock, which on the L1 is 25Mhz. */
+/* Thus, if FBK div is 2, SDRAM is 50Mhz; if FBK div is 3, SDRAM is */
+/* 150Mhz; if FBK is 3, SDRAM is 150Mhz. */
+
+ /* divisor = ((mfdcr(strap)>> 28) & 0x3); */
+
+/* write SDRAM timing for 100Mhz. */
+ mtdcr (memcfga, mem_sdtr1);
+ mtdcr (memcfgd, 0x0086400D);
+
+/* write SDRAM refresh interval register */
+ mtdcr (memcfga, mem_rtr);
+ mtdcr (memcfgd, 0x05F00000);
+ udelay (200);
+
+/* sdram controller.*/
+ mtdcr (memcfga, mem_mcopt1);
+ mtdcr (memcfgd, 0x90800000);
+ udelay (200);
+
+/* disable ECC on all banks */
+ mtdcr (memcfga, mem_ecccf);
+ tmp = mfdcr (memcfgd);
+ tmp &= 0xff0fffff;
+ mtdcr (memcfga, mem_ecccf);
+ mtdcr (memcfgd, tmp);
+
+/* set up SDRAM Controller with ECC enabled */
+ mtdcr (memcfga, mem_mcopt1);
+ tmp = (mfdcr (memcfgd) & ~0xFFE00000) | 0x90800000;
+ mtdcr (memcfga, mem_mcopt1);
+ mtdcr (memcfgd, tmp);
+ udelay (600);
+
+/* fill all the memory */
+ for (p = (unsigned long) 0; ((unsigned long) p < L1_MEMSIZE);
+ *p++ = 0L);
+ udelay (400);
+ mtdcr (memcfga, mem_ecccf);
+ tmp = mfdcr (memcfgd);
+
+/* enable ECC on bank 0 */
+ tmp |= 0x00800000;
+ mtdcr (memcfgd, tmp);
+ udelay (400);
+
+ return;
+}
+
+/* ------------------------------------------------------------------------- */
+static u8 *dhcp_env_update (u8 thing, u8 * pop)
+{
+ u8 i, oplen;
+
+ oplen = *(pop + 1);
+
+ if ((Things[thing].dhcpvalue = malloc (oplen)) == NULL) {
+ printf ("Whoops! failed to malloc space for DHCP thing %s\n",
+ Things[thing].envname);
+ return NULL;
+ }
+ for (i = 0; (i < oplen); i++)
+ if ((*(Things[thing].dhcpvalue + i) = *(pop + 2 + i)) == ' ')
+ break;
+ *(Things[thing].dhcpvalue + i) = '\0';
+
+/* set env. */
+ if (Things[thing].envname)
+ setenv (Things[thing].envname, Things[thing].dhcpvalue);
+ return (Things[thing].dhcpvalue);
+}
+
+/* ------------------------------------------------------------------------- */
+u8 *dhcp_vendorex_prep (u8 * e)
+{
+ u8 thing;
+
+/* ask for the things I want. */
+ *e++ = 55; /* Parameter Request List */
+ *e++ = N_THINGS;
+ for (thing = 0; thing < N_THINGS; thing++)
+ *e++ = Things[thing].dhcp_option;
+ *e++ = 255;
+
+ return e;
+}
+
+/* ------------------------------------------------------------------------- */
+/* .. return NULL means it wasnt mine, non-null means I got it..*/
+u8 *dhcp_vendorex_proc (u8 * pop)
+{
+ u8 oplen, *sub_op, sub_oplen, *retval;
+ u8 thing = 0;
+
+ retval = NULL;
+ oplen = *(pop + 1);
+/* if pop is vender spec indicator, there are sub-options. */
+ if (*pop == DHCP_VENDOR_SPECX) {
+ for (sub_op = pop + 2;
+ oplen && (sub_oplen = *(sub_op + 1));
+ oplen -= sub_oplen, sub_op += (sub_oplen + 2)) {
+ for (thing = 0; thing < N_THINGS; thing++) {
+ if (*sub_op == Things[thing].dhcp_vendor_option) {
+ if (!(retval = dhcp_env_update (thing, sub_op))) {
+ return NULL;
+ }
+ }
+ }
+ }
+ } else {
+ for (thing = 0; thing < N_THINGS; thing++) {
+ if (*pop == Things[thing].dhcp_option)
+ if (!(retval = dhcp_env_update (thing, pop)))
+ return NULL;
+ }
+ }
+ return (thing >= N_THINGS ? NULL : pop);
+}
diff --git a/board/cray/L1/L1.h b/board/cray/L1/L1.h
new file mode 100644
index 0000000..1b41824
--- /dev/null
+++ b/board/cray/L1/L1.h
@@ -0,0 +1,44 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/****************************************************************************
+ * FLASH Memory Map as used by CRAY L1, 4MB AMD29F032B flash chip
+ *
+ * Start Address Length
+ * +++++++++++++++++++++++++ 0xFFC0_0000 Start of Flash -----------------
+ * | Failsafe Linux Image | (1M)
+ * +=======================+ 0xFFD0_0000
+ * | (Reserved FlashFiles) | (1M)
+ * +=======================+ 0xFFE0_0000
+ * | Failsafe RootFS | (1M)
+ * +=======================+ 0xFFF0_0000
+ * | |
+ * | U N U S E D |
+ * | |
+ * +-----------------------+ 0xFFFD_0000 U-Boot image header (64 bytes)
+ * | environment settings | (64k)
+ * +-----------------------+ 0xFFFE_0000 U-Boot image header (64 bytes)
+ * | U-Boot | 0xFFFE_0040 _start of U-Boot
+ * | | 0xFFFE_FFFC reset vector - branch to _start
+ * +++++++++++++++++++++++++ 0xFFFF_FFFF End of Flash -----------------
+ *****************************************************************************/