wait_bit: use wait_for_bit_le32 and remove wait_for_bit
wait_for_bit callers use the 32 bit LE version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
diff --git a/drivers/clk/clk_pic32.c b/drivers/clk/clk_pic32.c
index f6eef31..1778039 100644
--- a/drivers/clk/clk_pic32.c
+++ b/drivers/clk/clk_pic32.c
@@ -197,8 +197,8 @@
writel(REFO_ON | REFO_OE, reg + _CLR_OFFSET);
/* wait till previous src change is active */
- wait_for_bit(__func__, reg, REFO_DIVSW_EN | REFO_ACTIVE,
- false, CONFIG_SYS_HZ, false);
+ wait_for_bit_le32(reg, REFO_DIVSW_EN | REFO_ACTIVE,
+ false, CONFIG_SYS_HZ, false);
/* parent_id */
v = readl(reg);
@@ -223,8 +223,8 @@
writel(REFO_DIVSW_EN, reg + _SET_OFFSET);
/* wait for divider switching to complete */
- return wait_for_bit(__func__, reg, REFO_DIVSW_EN, false,
- CONFIG_SYS_HZ, false);
+ return wait_for_bit_le32(reg, REFO_DIVSW_EN, false,
+ CONFIG_SYS_HZ, false);
}
static ulong pic32_get_refclk(struct pic32_clk_priv *priv, int periph)
@@ -311,8 +311,8 @@
/* Wait for ready */
mask = MPLL_RDY | MPLL_VREG_RDY;
- return wait_for_bit(__func__, priv->syscfg_base + CFGMPLL, mask,
- true, get_tbclk(), false);
+ return wait_for_bit_le32(priv->syscfg_base + CFGMPLL, mask,
+ true, get_tbclk(), false);
}
static void pic32_clk_init(struct udevice *dev)
diff --git a/drivers/clk/renesas/clk-rcar-gen3.c b/drivers/clk/renesas/clk-rcar-gen3.c
index b26bbcc..22828fd 100644
--- a/drivers/clk/renesas/clk-rcar-gen3.c
+++ b/drivers/clk/renesas/clk-rcar-gen3.c
@@ -1046,8 +1046,8 @@
if (ret)
return ret;
clrbits_le32(priv->base + SMSTPCR(reg), bitmask);
- return wait_for_bit("MSTP", priv->base + MSTPSR(reg),
- bitmask, 0, 100, 0);
+ return wait_for_bit_le32(priv->base + MSTPSR(reg),
+ bitmask, 0, 100, 0);
} else {
setbits_le32(priv->base + SMSTPCR(reg), bitmask);
return 0;
diff --git a/drivers/ddr/microchip/ddr2.c b/drivers/ddr/microchip/ddr2.c
index 6056418..a52427c 100644
--- a/drivers/ddr/microchip/ddr2.c
+++ b/drivers/ddr/microchip/ddr2.c
@@ -57,8 +57,8 @@
writel(SCL_START | SCL_EN, &ddr2_phy->scl_start);
/* Wait for SCL for data byte to pass */
- return wait_for_bit(__func__, &ddr2_phy->scl_start, SCL_LUBPASS,
- true, CONFIG_SYS_HZ, false);
+ return wait_for_bit_le32(&ddr2_phy->scl_start, SCL_LUBPASS,
+ true, CONFIG_SYS_HZ, false);
}
/* DDR2 Controller initialization */
@@ -256,8 +256,8 @@
writel(INIT_START, &ctrl->memcon);
/* wait for all host cmds to be transmitted */
- wait_for_bit(__func__, &ctrl->cmdissue, CMD_VALID, false,
- CONFIG_SYS_HZ, false);
+ wait_for_bit_le32(&ctrl->cmdissue, CMD_VALID, false,
+ CONFIG_SYS_HZ, false);
/* inform all cmds issued, ready for normal operation */
writel(INIT_START | INIT_DONE, &ctrl->memcon);
diff --git a/drivers/fpga/socfpga_arria10.c b/drivers/fpga/socfpga_arria10.c
index 5c1a68a..d576396 100644
--- a/drivers/fpga/socfpga_arria10.c
+++ b/drivers/fpga/socfpga_arria10.c
@@ -62,8 +62,7 @@
static int wait_for_user_mode(void)
{
- return wait_for_bit(__func__,
- &fpga_manager_base->imgcfg_stat,
+ return wait_for_bit_le32(&fpga_manager_base->imgcfg_stat,
ALT_FPGAMGR_IMGCFG_STAT_F2S_USERMODE_SET_MSK,
1, FPGA_TIMEOUT_MSEC, false);
}
@@ -115,19 +114,17 @@
/* Poll until f2s_nconfig_pin and f2s_nstatus_pin; loop until de-asserted,
* timeout at 1000ms
*/
- return wait_for_bit(__func__,
- &fpga_manager_base->imgcfg_stat,
- mask,
- false, FPGA_TIMEOUT_MSEC, false);
+ return wait_for_bit_le32(&fpga_manager_base->imgcfg_stat,
+ mask,
+ false, FPGA_TIMEOUT_MSEC, false);
}
static int wait_for_f2s_nstatus_pin(unsigned long value)
{
/* Poll until f2s to specific value, timeout at 1000ms */
- return wait_for_bit(__func__,
- &fpga_manager_base->imgcfg_stat,
- ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK,
- value, FPGA_TIMEOUT_MSEC, false);
+ return wait_for_bit_le32(&fpga_manager_base->imgcfg_stat,
+ ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK,
+ value, FPGA_TIMEOUT_MSEC, false);
}
/* set CD ratio */
diff --git a/drivers/mmc/msm_sdhci.c b/drivers/mmc/msm_sdhci.c
index 9117ab6..f0661bd 100644
--- a/drivers/mmc/msm_sdhci.c
+++ b/drivers/mmc/msm_sdhci.c
@@ -109,15 +109,15 @@
/* Wait for reset to be written to register */
- if (wait_for_bit(__func__, prv->base + SDCC_MCI_STATUS2,
- SDCC_MCI_STATUS2_MCI_ACT, false, 10, false)) {
+ if (wait_for_bit_le32(prv->base + SDCC_MCI_STATUS2,
+ SDCC_MCI_STATUS2_MCI_ACT, false, 10, false)) {
printf("msm_sdhci: reset request failed\n");
return -EIO;
}
/* SW reset can take upto 10HCLK + 15MCLK cycles. (min 40us) */
- if (wait_for_bit(__func__, prv->base + SDCC_MCI_POWER,
- SDCC_MCI_POWER_SW_RST, false, 2, false)) {
+ if (wait_for_bit_le32(prv->base + SDCC_MCI_POWER,
+ SDCC_MCI_POWER_SW_RST, false, 2, false)) {
printf("msm_sdhci: stuck in reset\n");
return -ETIMEDOUT;
}
diff --git a/drivers/mtd/pic32_flash.c b/drivers/mtd/pic32_flash.c
index e1a8d3b..8bbf2fa 100644
--- a/drivers/mtd/pic32_flash.c
+++ b/drivers/mtd/pic32_flash.c
@@ -66,8 +66,8 @@
static int flash_wait_till_busy(const char *func, ulong timeout)
{
- int ret = wait_for_bit(__func__, &nvm_regs_p->ctrl.raw,
- NVM_WR, false, timeout, false);
+ int ret = wait_for_bit_le32(&nvm_regs_p->ctrl.raw,
+ NVM_WR, false, timeout, false);
return ret ? ERR_TIMOUT : ERR_OK;
}
diff --git a/drivers/net/ag7xxx.c b/drivers/net/ag7xxx.c
index 00e6806..f281870 100644
--- a/drivers/net/ag7xxx.c
+++ b/drivers/net/ag7xxx.c
@@ -164,8 +164,8 @@
writel(AG7XXX_ETH_MII_MGMT_CMD_READ,
regs + AG7XXX_ETH_MII_MGMT_CMD);
- ret = wait_for_bit("ag7xxx", regs + AG7XXX_ETH_MII_MGMT_IND,
- AG7XXX_ETH_MII_MGMT_IND_BUSY, 0, 1000, 0);
+ ret = wait_for_bit_le32(regs + AG7XXX_ETH_MII_MGMT_IND,
+ AG7XXX_ETH_MII_MGMT_IND_BUSY, 0, 1000, 0);
if (ret)
return ret;
@@ -185,8 +185,8 @@
regs + AG7XXX_ETH_MII_MGMT_ADDRESS);
writel(val, regs + AG7XXX_ETH_MII_MGMT_CTRL);
- ret = wait_for_bit("ag7xxx", regs + AG7XXX_ETH_MII_MGMT_IND,
- AG7XXX_ETH_MII_MGMT_IND_BUSY, 0, 1000, 0);
+ ret = wait_for_bit_le32(regs + AG7XXX_ETH_MII_MGMT_IND,
+ AG7XXX_ETH_MII_MGMT_IND_BUSY, 0, 1000, 0);
return ret;
}
@@ -510,13 +510,13 @@
/* Stop the TX DMA. */
writel(0, priv->regs + AG7XXX_ETH_DMA_TX_CTRL);
- wait_for_bit("ag7xxx", priv->regs + AG7XXX_ETH_DMA_TX_CTRL, ~0, 0,
- 1000, 0);
+ wait_for_bit_le32(priv->regs + AG7XXX_ETH_DMA_TX_CTRL, ~0, 0,
+ 1000, 0);
/* Stop the RX DMA. */
writel(0, priv->regs + AG7XXX_ETH_DMA_RX_CTRL);
- wait_for_bit("ag7xxx", priv->regs + AG7XXX_ETH_DMA_RX_CTRL, ~0, 0,
- 1000, 0);
+ wait_for_bit_le32(priv->regs + AG7XXX_ETH_DMA_RX_CTRL, ~0, 0,
+ 1000, 0);
}
/*
diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c
index 00076cf..232e803 100644
--- a/drivers/net/dwc_eth_qos.c
+++ b/drivers/net/dwc_eth_qos.c
@@ -361,8 +361,9 @@
static int eqos_mdio_wait_idle(struct eqos_priv *eqos)
{
- return wait_for_bit(__func__, &eqos->mac_regs->mdio_address,
- EQOS_MAC_MDIO_ADDRESS_GB, false, 1000000, true);
+ return wait_for_bit_le32(&eqos->mac_regs->mdio_address,
+ EQOS_MAC_MDIO_ADDRESS_GB, false,
+ 1000000, true);
}
static int eqos_mdio_read(struct mii_dev *bus, int mdio_addr, int mdio_devad,
@@ -588,15 +589,15 @@
setbits_le32(&eqos->tegra186_regs->auto_cal_config,
EQOS_AUTO_CAL_CONFIG_START | EQOS_AUTO_CAL_CONFIG_ENABLE);
- ret = wait_for_bit(__func__, &eqos->tegra186_regs->auto_cal_status,
- EQOS_AUTO_CAL_STATUS_ACTIVE, true, 10, false);
+ ret = wait_for_bit_le32(&eqos->tegra186_regs->auto_cal_status,
+ EQOS_AUTO_CAL_STATUS_ACTIVE, true, 10, false);
if (ret) {
pr_err("calibrate didn't start");
goto failed;
}
- ret = wait_for_bit(__func__, &eqos->tegra186_regs->auto_cal_status,
- EQOS_AUTO_CAL_STATUS_ACTIVE, false, 10, false);
+ ret = wait_for_bit_le32(&eqos->tegra186_regs->auto_cal_status,
+ EQOS_AUTO_CAL_STATUS_ACTIVE, false, 10, false);
if (ret) {
pr_err("calibrate didn't finish");
goto failed;
@@ -862,8 +863,8 @@
eqos->reg_access_ok = true;
- ret = wait_for_bit(__func__, &eqos->dma_regs->mode,
- EQOS_DMA_MODE_SWR, false, 10, false);
+ ret = wait_for_bit_le32(&eqos->dma_regs->mode,
+ EQOS_DMA_MODE_SWR, false, 10, false);
if (ret) {
pr_err("EQOS_DMA_MODE_SWR stuck");
goto err_stop_resets;
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index a6df950..51a6c97 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -548,8 +548,8 @@
ethoc_write(priv, MIIADDRESS, MIIADDRESS_ADDR(addr, reg));
ethoc_write(priv, MIICOMMAND, MIICOMMAND_READ);
- rc = wait_for_bit(__func__, ethoc_reg(priv, MIISTATUS),
- MIISTATUS_BUSY, false, CONFIG_SYS_HZ, false);
+ rc = wait_for_bit_le32(ethoc_reg(priv, MIISTATUS),
+ MIISTATUS_BUSY, false, CONFIG_SYS_HZ, false);
if (rc == 0) {
u32 data = ethoc_read(priv, MIIRX_DATA);
@@ -571,8 +571,8 @@
ethoc_write(priv, MIITX_DATA, val);
ethoc_write(priv, MIICOMMAND, MIICOMMAND_WRITE);
- rc = wait_for_bit(__func__, ethoc_reg(priv, MIISTATUS),
- MIISTATUS_BUSY, false, CONFIG_SYS_HZ, false);
+ rc = wait_for_bit_le32(ethoc_reg(priv, MIISTATUS),
+ MIISTATUS_BUSY, false, CONFIG_SYS_HZ, false);
if (rc == 0) {
/* reset MII command register */
diff --git a/drivers/net/pic32_eth.c b/drivers/net/pic32_eth.c
index 0b89911..7129372 100644
--- a/drivers/net/pic32_eth.c
+++ b/drivers/net/pic32_eth.c
@@ -64,8 +64,8 @@
writel(ETHCON_ON | ETHCON_TXRTS | ETHCON_RXEN, &ectl_p->con1.clr);
/* wait till busy */
- wait_for_bit(__func__, &ectl_p->stat.raw, ETHSTAT_BUSY, false,
- CONFIG_SYS_HZ, false);
+ wait_for_bit_le32(&ectl_p->stat.raw, ETHSTAT_BUSY, false,
+ CONFIG_SYS_HZ, false);
/* turn controller ON to access PHY over MII */
writel(ETHCON_ON, &ectl_p->con1.set);
@@ -239,8 +239,8 @@
writel(ETHCON_ON | ETHCON_TXRTS | ETHCON_RXEN, &ectl_p->con1.clr);
/* wait till busy */
- wait_for_bit(__func__, &ectl_p->stat.raw, ETHSTAT_BUSY, false,
- CONFIG_SYS_HZ, false);
+ wait_for_bit_le32(&ectl_p->stat.raw, ETHSTAT_BUSY, false,
+ CONFIG_SYS_HZ, false);
/* decrement received buffcnt to zero. */
while (readl(&ectl_p->stat.raw) & ETHSTAT_BUFCNT)
writel(ETHCON_BUFCDEC, &ectl_p->con1.set);
@@ -375,8 +375,8 @@
mdelay(10);
/* wait until everything is down */
- wait_for_bit(__func__, &ectl_p->stat.raw, ETHSTAT_BUSY, false,
- 2 * CONFIG_SYS_HZ, false);
+ wait_for_bit_le32(&ectl_p->stat.raw, ETHSTAT_BUSY, false,
+ 2 * CONFIG_SYS_HZ, false);
/* clear any existing interrupt event */
writel(0xffffffff, &ectl_p->irq.clr);
diff --git a/drivers/net/pic32_mdio.c b/drivers/net/pic32_mdio.c
index 578fc96..6ae5c40 100644
--- a/drivers/net/pic32_mdio.c
+++ b/drivers/net/pic32_mdio.c
@@ -22,8 +22,8 @@
struct pic32_mii_regs *mii_regs = bus->priv;
/* Wait for the previous operation to finish */
- wait_for_bit(__func__, &mii_regs->mind.raw, MIIMIND_BUSY,
- false, CONFIG_SYS_HZ, true);
+ wait_for_bit_le32(&mii_regs->mind.raw, MIIMIND_BUSY,
+ false, CONFIG_SYS_HZ, true);
/* Put phyaddr and regaddr into MIIMADD */
v = (addr << MIIMADD_PHYADDR_SHIFT) | (reg & MIIMADD_REGADDR);
@@ -36,8 +36,8 @@
udelay(12);
/* Wait for write to complete */
- wait_for_bit(__func__, &mii_regs->mind.raw, MIIMIND_BUSY,
- false, CONFIG_SYS_HZ, true);
+ wait_for_bit_le32(&mii_regs->mind.raw, MIIMIND_BUSY,
+ false, CONFIG_SYS_HZ, true);
return 0;
}
@@ -48,8 +48,8 @@
struct pic32_mii_regs *mii_regs = bus->priv;
/* Wait for the previous operation to finish */
- wait_for_bit(__func__, &mii_regs->mind.raw, MIIMIND_BUSY,
- false, CONFIG_SYS_HZ, true);
+ wait_for_bit_le32(&mii_regs->mind.raw, MIIMIND_BUSY,
+ false, CONFIG_SYS_HZ, true);
/* Put phyaddr and regaddr into MIIMADD */
v = (addr << MIIMADD_PHYADDR_SHIFT) | (reg & MIIMADD_REGADDR);
@@ -62,9 +62,9 @@
udelay(12);
/* Wait for read to complete */
- wait_for_bit(__func__, &mii_regs->mind.raw,
- MIIMIND_NOTVALID | MIIMIND_BUSY,
- false, CONFIG_SYS_HZ, false);
+ wait_for_bit_le32(&mii_regs->mind.raw,
+ MIIMIND_NOTVALID | MIIMIND_BUSY,
+ false, CONFIG_SYS_HZ, false);
/* Clear the command register */
writel(0, &mii_regs->mcmd.raw);
@@ -82,22 +82,22 @@
writel(MIIMCFG_RSTMGMT, &mii_regs->mcfg.raw);
/* Wait for the operation to finish */
- wait_for_bit(__func__, &mii_regs->mind.raw, MIIMIND_BUSY,
+ wait_for_bit_le32(&mii_regs->mind.raw, MIIMIND_BUSY,
false, CONFIG_SYS_HZ, true);
/* Clear reset bit */
writel(0, &mii_regs->mcfg);
/* Wait for the operation to finish */
- wait_for_bit(__func__, &mii_regs->mind.raw, MIIMIND_BUSY,
- false, CONFIG_SYS_HZ, true);
+ wait_for_bit_le32(&mii_regs->mind.raw, MIIMIND_BUSY,
+ false, CONFIG_SYS_HZ, true);
/* Set the MII Management Clock (MDC) - no faster than 2.5 MHz */
writel(MIIMCFG_CLKSEL_DIV40, &mii_regs->mcfg.raw);
/* Wait for the operation to finish */
- wait_for_bit(__func__, &mii_regs->mind.raw, MIIMIND_BUSY,
- false, CONFIG_SYS_HZ, true);
+ wait_for_bit_le32(&mii_regs->mind.raw, MIIMIND_BUSY,
+ false, CONFIG_SYS_HZ, true);
return 0;
}
diff --git a/drivers/net/ravb.c b/drivers/net/ravb.c
index dc743e1..26bd915 100644
--- a/drivers/net/ravb.c
+++ b/drivers/net/ravb.c
@@ -222,8 +222,8 @@
writel(CCC_OPC_CONFIG, eth->iobase + RAVB_REG_CCC);
/* Check the operating mode is changed to the config mode. */
- return wait_for_bit(dev->name, (void *)eth->iobase + RAVB_REG_CSR,
- CSR_OPS_CONFIG, true, 100, true);
+ return wait_for_bit_le32(eth->iobase + RAVB_REG_CSR,
+ CSR_OPS_CONFIG, true, 100, true);
}
static void ravb_base_desc_init(struct ravb_priv *eth)
diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c
index 9a2a578..70a2e95 100644
--- a/drivers/net/xilinx_axi_emac.c
+++ b/drivers/net/xilinx_axi_emac.c
@@ -366,8 +366,8 @@
* processor mode and hence bypass in this mode
*/
if (!priv->eth_hasnobuf) {
- err = wait_for_bit(__func__, (const u32 *)®s->is,
- XAE_INT_MGTRDY_MASK, true, 200, false);
+ err = wait_for_bit_le32(®s->is, XAE_INT_MGTRDY_MASK,
+ true, 200, false);
if (err) {
printf("%s: Timeout\n", __func__);
return 1;
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 1dfd631..2cc49bc 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -192,8 +192,8 @@
struct zynq_gem_regs *regs = priv->iobase;
int err;
- err = wait_for_bit(__func__, ®s->nwsr, ZYNQ_GEM_NWSR_MDIOIDLE_MASK,
- true, 20000, false);
+ err = wait_for_bit_le32(®s->nwsr, ZYNQ_GEM_NWSR_MDIOIDLE_MASK,
+ true, 20000, false);
if (err)
return err;
@@ -205,8 +205,8 @@
/* Write mgtcr and wait for completion */
writel(mgtcr, ®s->phymntnc);
- err = wait_for_bit(__func__, ®s->nwsr, ZYNQ_GEM_NWSR_MDIOIDLE_MASK,
- true, 20000, false);
+ err = wait_for_bit_le32(®s->nwsr, ZYNQ_GEM_NWSR_MDIOIDLE_MASK,
+ true, 20000, false);
if (err)
return err;
@@ -514,8 +514,8 @@
if (priv->tx_bd->status & ZYNQ_GEM_TXBUF_EXHAUSTED)
printf("TX buffers exhausted in mid frame\n");
- return wait_for_bit(__func__, ®s->txsr, ZYNQ_GEM_TSR_DONE,
- true, 20000, true);
+ return wait_for_bit_le32(®s->txsr, ZYNQ_GEM_TSR_DONE,
+ true, 20000, true);
}
/* Do not check frame_recd flag in rx_status register 0x20 - just poll BD */
diff --git a/drivers/reset/sti-reset.c b/drivers/reset/sti-reset.c
index 17786f9..0fc5a28 100644
--- a/drivers/reset/sti-reset.c
+++ b/drivers/reset/sti-reset.c
@@ -266,8 +266,8 @@
return 0;
reg = (void __iomem *)base + ch->ack_offset;
- if (wait_for_bit(__func__, reg, BIT(ch->ack_bit), ctrl_val,
- 1000, false)) {
+ if (wait_for_bit_le32(reg, BIT(ch->ack_bit), ctrl_val,
+ 1000, false)) {
pr_err("Stuck on waiting ack reset_ctl=%p dev=%p id=%lu\n",
reset_ctl, reset_ctl->dev, reset_ctl->id);
diff --git a/drivers/serial/serial_pic32.c b/drivers/serial/serial_pic32.c
index b0e01aa..0632d26 100644
--- a/drivers/serial/serial_pic32.c
+++ b/drivers/serial/serial_pic32.c
@@ -51,8 +51,8 @@
u32 div = DIV_ROUND_CLOSEST(clk, baudrate * 16);
/* wait for TX FIFO to empty */
- wait_for_bit(__func__, base + U_STA, UART_TX_EMPTY,
- true, CONFIG_SYS_HZ, false);
+ wait_for_bit_le32(base + U_STA, UART_TX_EMPTY,
+ true, CONFIG_SYS_HZ, false);
/* send break */
writel(UART_TX_BRK, base + U_STASET);
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 228e714..8010ab4 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -394,8 +394,8 @@
* Wait until the transfer is completely done before
* we deactivate CS.
*/
- wait_for_bit(__func__, ®_base->sr,
- ATMEL_SPI_SR_TXEMPTY, true, 1000, false);
+ wait_for_bit_le32(®_base->sr,
+ ATMEL_SPI_SR_TXEMPTY, true, 1000, false);
atmel_spi_cs_deactivate(dev);
}
diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c
index e02f221..dca3fdf 100644
--- a/drivers/spi/cadence_qspi_apb.c
+++ b/drivers/spi/cadence_qspi_apb.c
@@ -675,8 +675,8 @@
}
/* Check indirect done status */
- ret = wait_for_bit("QSPI", plat->regbase + CQSPI_REG_INDIRECTRD,
- CQSPI_REG_INDIRECTRD_DONE, 1, 10, 0);
+ ret = wait_for_bit_le32(plat->regbase + CQSPI_REG_INDIRECTRD,
+ CQSPI_REG_INDIRECTRD_DONE, 1, 10, 0);
if (ret) {
printf("Indirect read completion error (%i)\n", ret);
goto failrd;
@@ -762,9 +762,9 @@
bb_txbuf + rounddown(write_bytes, 4),
write_bytes % 4);
- ret = wait_for_bit("QSPI", plat->regbase + CQSPI_REG_SDRAMLEVEL,
- CQSPI_REG_SDRAMLEVEL_WR_MASK <<
- CQSPI_REG_SDRAMLEVEL_WR_LSB, 0, 10, 0);
+ ret = wait_for_bit_le32(plat->regbase + CQSPI_REG_SDRAMLEVEL,
+ CQSPI_REG_SDRAMLEVEL_WR_MASK <<
+ CQSPI_REG_SDRAMLEVEL_WR_LSB, 0, 10, 0);
if (ret) {
printf("Indirect write timed out (%i)\n", ret);
goto failwr;
@@ -775,8 +775,8 @@
}
/* Check indirect done status */
- ret = wait_for_bit("QSPI", plat->regbase + CQSPI_REG_INDIRECTWR,
- CQSPI_REG_INDIRECTWR_DONE, 1, 10, 0);
+ ret = wait_for_bit_le32(plat->regbase + CQSPI_REG_INDIRECTWR,
+ CQSPI_REG_INDIRECTWR_DONE, 1, 10, 0);
if (ret) {
printf("Indirect write completion error (%i)\n", ret);
goto failwr;
diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c
index 0f3f7d9..eed52c1 100644
--- a/drivers/spi/fsl_qspi.c
+++ b/drivers/spi/fsl_qspi.c
@@ -1011,11 +1011,11 @@
priv->num_chipselect = plat->num_chipselect;
/* make sure controller is not busy anywhere */
- ret = wait_for_bit(__func__, &priv->regs->sr,
- QSPI_SR_BUSY_MASK |
- QSPI_SR_AHB_ACC_MASK |
- QSPI_SR_IP_ACC_MASK,
- false, 100, false);
+ ret = wait_for_bit_le32(&priv->regs->sr,
+ QSPI_SR_BUSY_MASK |
+ QSPI_SR_AHB_ACC_MASK |
+ QSPI_SR_IP_ACC_MASK,
+ false, 100, false);
if (ret) {
debug("ERROR : The controller is busy\n");
@@ -1173,11 +1173,11 @@
priv = dev_get_priv(bus);
/* make sure controller is not busy anywhere */
- ret = wait_for_bit(__func__, &priv->regs->sr,
- QSPI_SR_BUSY_MASK |
- QSPI_SR_AHB_ACC_MASK |
- QSPI_SR_IP_ACC_MASK,
- false, 100, false);
+ ret = wait_for_bit_le32(&priv->regs->sr,
+ QSPI_SR_BUSY_MASK |
+ QSPI_SR_AHB_ACC_MASK |
+ QSPI_SR_IP_ACC_MASK,
+ false, 100, false);
if (ret) {
debug("ERROR : The controller is busy\n");
diff --git a/drivers/spi/mvebu_a3700_spi.c b/drivers/spi/mvebu_a3700_spi.c
index ec49073..d1708a8 100644
--- a/drivers/spi/mvebu_a3700_spi.c
+++ b/drivers/spi/mvebu_a3700_spi.c
@@ -95,8 +95,9 @@
din_8 = din;
while (bytelen) {
- ret = wait_for_bit(__func__, ®->ctrl,
- MVEBU_SPI_A3700_XFER_RDY, true, 100, false);
+ ret = wait_for_bit_le32(®->ctrl,
+ MVEBU_SPI_A3700_XFER_RDY,
+ true,100, false);
if (ret)
return ret;
@@ -109,9 +110,9 @@
writel(pending_dout, ®->dout);
if (din) {
- ret = wait_for_bit(__func__, ®->ctrl,
- MVEBU_SPI_A3700_XFER_RDY,
- true, 100, false);
+ ret = wait_for_bit_le32(®->ctrl,
+ MVEBU_SPI_A3700_XFER_RDY,
+ true, 100, false);
if (ret)
return ret;
@@ -160,8 +161,9 @@
/* Deactivate CS */
if (flags & SPI_XFER_END) {
- ret = wait_for_bit(__func__, ®->ctrl,
- MVEBU_SPI_A3700_XFER_RDY, true, 100, false);
+ ret = wait_for_bit_le32(®->ctrl,
+ MVEBU_SPI_A3700_XFER_RDY,
+ true, 100, false);
if (ret)
return ret;
@@ -231,8 +233,8 @@
/* Flush read/write FIFO */
data = readl(®->cfg);
writel(data | MVEBU_SPI_A3700_FIFO_FLUSH, ®->cfg);
- ret = wait_for_bit(__func__, ®->cfg, MVEBU_SPI_A3700_FIFO_FLUSH,
- false, 1000, false);
+ ret = wait_for_bit_le32(®->cfg, MVEBU_SPI_A3700_FIFO_FLUSH,
+ false, 1000, false);
if (ret)
return ret;
diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
index 1293e18..540c016 100644
--- a/drivers/usb/host/dwc2.c
+++ b/drivers/usb/host/dwc2.c
@@ -108,8 +108,8 @@
writel(DWC2_GRSTCTL_TXFFLSH | (num << DWC2_GRSTCTL_TXFNUM_OFFSET),
®s->grstctl);
- ret = wait_for_bit(__func__, ®s->grstctl, DWC2_GRSTCTL_TXFFLSH,
- false, 1000, false);
+ ret = wait_for_bit_le32(®s->grstctl, DWC2_GRSTCTL_TXFFLSH,
+ false, 1000, false);
if (ret)
printf("%s: Timeout!\n", __func__);
@@ -127,8 +127,8 @@
int ret;
writel(DWC2_GRSTCTL_RXFFLSH, ®s->grstctl);
- ret = wait_for_bit(__func__, ®s->grstctl, DWC2_GRSTCTL_RXFFLSH,
- false, 1000, false);
+ ret = wait_for_bit_le32(®s->grstctl, DWC2_GRSTCTL_RXFFLSH,
+ false, 1000, false);
if (ret)
printf("%s: Timeout!\n", __func__);
@@ -145,15 +145,15 @@
int ret;
/* Wait for AHB master IDLE state. */
- ret = wait_for_bit(__func__, ®s->grstctl, DWC2_GRSTCTL_AHBIDLE,
- true, 1000, false);
+ ret = wait_for_bit_le32(®s->grstctl, DWC2_GRSTCTL_AHBIDLE,
+ true, 1000, false);
if (ret)
printf("%s: Timeout!\n", __func__);
/* Core Soft Reset */
writel(DWC2_GRSTCTL_CSFTRST, ®s->grstctl);
- ret = wait_for_bit(__func__, ®s->grstctl, DWC2_GRSTCTL_CSFTRST,
- false, 1000, false);
+ ret = wait_for_bit_le32(®s->grstctl, DWC2_GRSTCTL_CSFTRST,
+ false, 1000, false);
if (ret)
printf("%s: Timeout!\n", __func__);
@@ -267,8 +267,8 @@
clrsetbits_le32(®s->hc_regs[i].hcchar,
DWC2_HCCHAR_EPDIR,
DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS);
- ret = wait_for_bit(__func__, ®s->hc_regs[i].hcchar,
- DWC2_HCCHAR_CHEN, false, 1000, false);
+ ret = wait_for_bit_le32(®s->hc_regs[i].hcchar,
+ DWC2_HCCHAR_CHEN, false, 1000, false);
if (ret)
printf("%s: Timeout!\n", __func__);
}
@@ -783,8 +783,8 @@
int ret;
uint32_t hcint, hctsiz;
- ret = wait_for_bit(__func__, &hc_regs->hcint, DWC2_HCINT_CHHLTD, true,
- 1000, false);
+ ret = wait_for_bit_le32(&hc_regs->hcint, DWC2_HCINT_CHHLTD, true,
+ 1000, false);
if (ret)
return ret;
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
index 2c0c633..f5320ca 100644
--- a/drivers/usb/host/ehci-msm.c
+++ b/drivers/usb/host/ehci-msm.c
@@ -133,8 +133,7 @@
setbits_le32(&ehci->usbcmd, CMD_RESET);
/* Wait for reset */
- if (wait_for_bit(__func__, &ehci->usbcmd, CMD_RESET, false, 30,
- false)) {
+ if (wait_for_bit_le32(&ehci->usbcmd, CMD_RESET, false, 30, false)) {
printf("Stuck on USB reset.\n");
return -ETIMEDOUT;
}
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index fe2627e..2c8fc3c 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -142,13 +142,12 @@
/* Stop then Reset */
clrbits_le32(usb_cmd, UCMD_RUN_STOP);
- ret = wait_for_bit(__func__, usb_cmd, UCMD_RUN_STOP, false, 10000,
- false);
+ ret = wait_for_bit_le32(usb_cmd, UCMD_RUN_STOP, false, 10000, false);
if (ret)
return ret;
setbits_le32(usb_cmd, UCMD_RESET);
- ret = wait_for_bit(__func__, usb_cmd, UCMD_RESET, false, 10000, false);
+ ret = wait_for_bit_le32(usb_cmd, UCMD_RESET, false, 10000, false);
if (ret)
return ret;
diff --git a/drivers/usb/host/ohci-lpc32xx.c b/drivers/usb/host/ohci-lpc32xx.c
index 2f2b4b9..44a4980 100644
--- a/drivers/usb/host/ohci-lpc32xx.c
+++ b/drivers/usb/host/ohci-lpc32xx.c
@@ -143,8 +143,8 @@
setbits_le32(&clk_pwr->usb_ctrl, CLK_USBCTRL_POSTDIV_2POW(0x01));
setbits_le32(&clk_pwr->usb_ctrl, CLK_USBCTRL_PLL_PWRUP);
- ret = wait_for_bit(__func__, &clk_pwr->usb_ctrl, CLK_USBCTRL_PLL_STS,
- true, CONFIG_SYS_HZ, false);
+ ret = wait_for_bit_le32(&clk_pwr->usb_ctrl, CLK_USBCTRL_PLL_STS,
+ true, CONFIG_SYS_HZ, false);
if (ret)
return ret;
@@ -178,8 +178,8 @@
/* enable I2C clock */
writel(OTG_CLK_I2C_EN, &otg->otg_clk_ctrl);
- ret = wait_for_bit(__func__, &otg->otg_clk_sts, OTG_CLK_I2C_EN, true,
- CONFIG_SYS_HZ, false);
+ ret = wait_for_bit_le32(&otg->otg_clk_sts, OTG_CLK_I2C_EN, true,
+ CONFIG_SYS_HZ, false);
if (ret)
return ret;
@@ -199,8 +199,8 @@
OTG_CLK_I2C_EN | OTG_CLK_HOST_EN;
writel(mask, &otg->otg_clk_ctrl);
- ret = wait_for_bit(__func__, &otg->otg_clk_sts, mask, true,
- CONFIG_SYS_HZ, false);
+ ret = wait_for_bit_le32(&otg->otg_clk_sts, mask, true,
+ CONFIG_SYS_HZ, false);
if (ret)
return ret;
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index d47c996..71202d7 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -55,18 +55,18 @@
setbits_le32(regs + RCAR_USB3_DL_CTRL,
RCAR_USB3_DL_CTRL_FW_SET_DATA0);
- ret = wait_for_bit("xhci-rcar", regs + RCAR_USB3_DL_CTRL,
- RCAR_USB3_DL_CTRL_FW_SET_DATA0, false,
- 10, false);
+ ret = wait_for_bit_le32(regs + RCAR_USB3_DL_CTRL,
+ RCAR_USB3_DL_CTRL_FW_SET_DATA0, false,
+ 10, false);
if (ret)
break;
}
clrbits_le32(regs + RCAR_USB3_DL_CTRL, RCAR_USB3_DL_CTRL_ENABLE);
- ret = wait_for_bit("xhci-rcar", regs + RCAR_USB3_DL_CTRL,
- RCAR_USB3_DL_CTRL_FW_SUCCESS, true,
- 10, false);
+ ret = wait_for_bit_le32(regs + RCAR_USB3_DL_CTRL,
+ RCAR_USB3_DL_CTRL_FW_SUCCESS, true,
+ 10, false);
return ret;
}
diff --git a/drivers/video/atmel_hlcdfb.c b/drivers/video/atmel_hlcdfb.c
index f77da2e..c0dd689 100644
--- a/drivers/video/atmel_hlcdfb.c
+++ b/drivers/video/atmel_hlcdfb.c
@@ -70,26 +70,26 @@
/* Disable DISP signal */
writel(LCDC_LCDDIS_DISPDIS, ®s->lcdc_lcddis);
- ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_DISPSTS,
- false, 1000, false);
+ ret = wait_for_bit_le32(®s->lcdc_lcdsr, LCDC_LCDSR_DISPSTS,
+ false, 1000, false);
if (ret)
printf("%s: %d: Timeout!\n", __func__, __LINE__);
/* Disable synchronization */
writel(LCDC_LCDDIS_SYNCDIS, ®s->lcdc_lcddis);
- ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_LCDSTS,
- false, 1000, false);
+ ret = wait_for_bit_le32(®s->lcdc_lcdsr, LCDC_LCDSR_LCDSTS,
+ false, 1000, false);
if (ret)
printf("%s: %d: Timeout!\n", __func__, __LINE__);
/* Disable pixel clock */
writel(LCDC_LCDDIS_CLKDIS, ®s->lcdc_lcddis);
- ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_CLKSTS,
- false, 1000, false);
+ ret = wait_for_bit_le32(®s->lcdc_lcdsr, LCDC_LCDSR_CLKSTS,
+ false, 1000, false);
if (ret)
printf("%s: %d: Timeout!\n", __func__, __LINE__);
/* Disable PWM */
writel(LCDC_LCDDIS_PWMDIS, ®s->lcdc_lcddis);
- ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_PWMSTS,
- false, 1000, false);
+ ret = wait_for_bit_le32(®s->lcdc_lcdsr, LCDC_LCDSR_PWMSTS,
+ false, 1000, false);
if (ret)
printf("%s: %d: Timeout!\n", __func__, __LINE__);
@@ -215,26 +215,26 @@
/* Enable LCD */
value = readl(®s->lcdc_lcden);
writel(value | LCDC_LCDEN_CLKEN, ®s->lcdc_lcden);
- ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_CLKSTS,
- true, 1000, false);
+ ret = wait_for_bit_le32(®s->lcdc_lcdsr, LCDC_LCDSR_CLKSTS,
+ true, 1000, false);
if (ret)
printf("%s: %d: Timeout!\n", __func__, __LINE__);
value = readl(®s->lcdc_lcden);
writel(value | LCDC_LCDEN_SYNCEN, ®s->lcdc_lcden);
- ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_LCDSTS,
- true, 1000, false);
+ ret = wait_for_bit_le32(®s->lcdc_lcdsr, LCDC_LCDSR_LCDSTS,
+ true, 1000, false);
if (ret)
printf("%s: %d: Timeout!\n", __func__, __LINE__);
value = readl(®s->lcdc_lcden);
writel(value | LCDC_LCDEN_DISPEN, ®s->lcdc_lcden);
- ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_DISPSTS,
- true, 1000, false);
+ ret = wait_for_bit_le32(®s->lcdc_lcdsr, LCDC_LCDSR_DISPSTS,
+ true, 1000, false);
if (ret)
printf("%s: %d: Timeout!\n", __func__, __LINE__);
value = readl(®s->lcdc_lcden);
writel(value | LCDC_LCDEN_PWMEN, ®s->lcdc_lcden);
- ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_PWMSTS,
- true, 1000, false);
+ ret = wait_for_bit_le32(®s->lcdc_lcdsr, LCDC_LCDSR_PWMSTS,
+ true, 1000, false);
if (ret)
printf("%s: %d: Timeout!\n", __func__, __LINE__);
@@ -299,26 +299,26 @@
/* Disable DISP signal */
writel(LCDC_LCDDIS_DISPDIS, ®s->lcdc_lcddis);
- ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_DISPSTS,
- false, 1000, false);
+ ret = wait_for_bit_le32(®s->lcdc_lcdsr, LCDC_LCDSR_DISPSTS,
+ false, 1000, false);
if (ret)
printf("%s: %d: Timeout!\n", __func__, __LINE__);
/* Disable synchronization */
writel(LCDC_LCDDIS_SYNCDIS, ®s->lcdc_lcddis);
- ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_LCDSTS,
- false, 1000, false);
+ ret = wait_for_bit_le32(®s->lcdc_lcdsr, LCDC_LCDSR_LCDSTS,
+ false, 1000, false);
if (ret)
printf("%s: %d: Timeout!\n", __func__, __LINE__);
/* Disable pixel clock */
writel(LCDC_LCDDIS_CLKDIS, ®s->lcdc_lcddis);
- ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_CLKSTS,
- false, 1000, false);
+ ret = wait_for_bit_le32(®s->lcdc_lcdsr, LCDC_LCDSR_CLKSTS,
+ false, 1000, false);
if (ret)
printf("%s: %d: Timeout!\n", __func__, __LINE__);
/* Disable PWM */
writel(LCDC_LCDDIS_PWMDIS, ®s->lcdc_lcddis);
- ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_PWMSTS,
- false, 1000, false);
+ ret = wait_for_bit_le32(®s->lcdc_lcdsr, LCDC_LCDSR_PWMSTS,
+ false, 1000, false);
if (ret)
printf("%s: %d: Timeout!\n", __func__, __LINE__);
@@ -451,26 +451,26 @@
/* Enable LCD */
value = readl(®s->lcdc_lcden);
writel(value | LCDC_LCDEN_CLKEN, ®s->lcdc_lcden);
- ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_CLKSTS,
- true, 1000, false);
+ ret = wait_for_bit_le32(®s->lcdc_lcdsr, LCDC_LCDSR_CLKSTS,
+ true, 1000, false);
if (ret)
printf("%s: %d: Timeout!\n", __func__, __LINE__);
value = readl(®s->lcdc_lcden);
writel(value | LCDC_LCDEN_SYNCEN, ®s->lcdc_lcden);
- ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_LCDSTS,
- true, 1000, false);
+ ret = wait_for_bit_le32(®s->lcdc_lcdsr, LCDC_LCDSR_LCDSTS,
+ true, 1000, false);
if (ret)
printf("%s: %d: Timeout!\n", __func__, __LINE__);
value = readl(®s->lcdc_lcden);
writel(value | LCDC_LCDEN_DISPEN, ®s->lcdc_lcden);
- ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_DISPSTS,
- true, 1000, false);
+ ret = wait_for_bit_le32(®s->lcdc_lcdsr, LCDC_LCDSR_DISPSTS,
+ true, 1000, false);
if (ret)
printf("%s: %d: Timeout!\n", __func__, __LINE__);
value = readl(®s->lcdc_lcden);
writel(value | LCDC_LCDEN_PWMEN, ®s->lcdc_lcden);
- ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_PWMSTS,
- true, 1000, false);
+ ret = wait_for_bit_le32(®s->lcdc_lcdsr, LCDC_LCDSR_PWMSTS,
+ true, 1000, false);
if (ret)
printf("%s: %d: Timeout!\n", __func__, __LINE__);
}