arm: dts: k3-j721e-common-proc-board: Add DMA and CPSW related DT nodes
Add DT nodes related to DMA and CPSW to -u-boot.dtsi to get networking
up on J721e EVM.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
diff --git a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
index 541da22..9291e57 100644
--- a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
@@ -3,11 +3,18 @@
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
*/
+#include <dt-bindings/dma/k3-udma.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
/ {
chosen {
stdout-path = "serial2:115200n8";
tick-timer = &timer1;
};
+
+ aliases {
+ ethernet0 = &cpsw_port1;
+ };
};
&cbass_main{
@@ -24,6 +31,184 @@
clock-frequency = <25000000>;
u-boot,dm-spl;
};
+
+ mcu_conf: scm_conf@40f00000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x40f00000 0x0 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+ phy_sel: cpsw-phy-sel@4040 {
+ compatible = "ti,am654-cpsw-phy-sel";
+ reg = <0x4040 0x4>;
+ reg-names = "gmii-sel";
+ };
+ };
+
+ cbass_mcu_navss: mcu_navss {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-coherent;
+ dma-ranges;
+ ranges;
+
+ ti,sci-dev-id = <232>;
+ u-boot,dm-spl;
+
+ mcu_ringacc: ringacc@2b800000 {
+ compatible = "ti,am654-navss-ringacc";
+ reg = <0x0 0x2b800000 0x0 0x400000>,
+ <0x0 0x2b000000 0x0 0x400000>,
+ <0x0 0x28590000 0x0 0x100>,
+ <0x0 0x2a500000 0x0 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+ ti,num-rings = <286>;
+ ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <235>;
+ u-boot,dm-spl;
+ };
+
+ mcu_udmap: udmap@31150000 {
+ compatible = "ti,j721e-navss-mcu-udmap";
+ reg = <0x0 0x285c0000 0x0 0x100>,
+ <0x0 0x2a800000 0x0 0x40000>,
+ <0x0 0x2aa00000 0x0 0x40000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt";
+ #dma-cells = <3>;
+
+ ti,ringacc = <&mcu_ringacc>;
+ ti,psil-base = <0x6000>;
+
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <236>;
+
+ ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+ <0x0f>; /* TX_HCHAN */
+ ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+ <0x0b>; /* RX_HCHAN */
+ ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+ u-boot,dm-spl;
+ };
+ };
+
+ mcu_cpsw: ethernet@046000000 {
+ compatible = "ti,j721e-cpsw-nuss";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0 0x46000000 0x0 0x200000>;
+ reg-names = "cpsw_nuss";
+ ranges;
+ dma-coherent;
+ clocks = <&k3_clks 18 22>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>;
+ ti,psil-base = <0x7000>;
+ cpsw-phy-sel = <&phy_sel>;
+
+ dmas = <&mcu_udmap &mcu_cpsw 0 UDMA_DIR_TX>,
+ <&mcu_udmap &mcu_cpsw 1 UDMA_DIR_TX>,
+ <&mcu_udmap &mcu_cpsw 2 UDMA_DIR_TX>,
+ <&mcu_udmap &mcu_cpsw 3 UDMA_DIR_TX>,
+ <&mcu_udmap &mcu_cpsw 4 UDMA_DIR_TX>,
+ <&mcu_udmap &mcu_cpsw 5 UDMA_DIR_TX>,
+ <&mcu_udmap &mcu_cpsw 6 UDMA_DIR_TX>,
+ <&mcu_udmap &mcu_cpsw 7 UDMA_DIR_TX>,
+ <&mcu_udmap &mcu_cpsw 0 UDMA_DIR_RX>;
+ dma-names = "tx0", "tx1", "tx2", "tx3",
+ "tx4", "tx5", "tx6", "tx7",
+ "rx";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ host: host@0 {
+ reg = <0>;
+ ti,label = "host";
+ };
+
+ cpsw_port1: port@1 {
+ reg = <1>;
+ ti,mac-only;
+ ti,label = "port1";
+ ti,syscon-efuse = <&mcu_conf 0x200>;
+ };
+ };
+
+ davinci_mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus_freq = <1000000>;
+ };
+
+ cpts {
+ clocks = <&k3_clks 18 2>;
+ clock-names = "cpts";
+ interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cpts";
+ ti,cpts-ext-ts-inputs = <4>;
+ ti,cpts-periodic-outputs = <2>;
+ };
+
+ ti,psil-config0 {
+ linux,udma-mode = <UDMA_PKT_MODE>;
+ statictr-type = <PSIL_STATIC_TR_NONE>;
+ ti,needs-epib;
+ ti,psd-size = <16>;
+ };
+
+ ti,psil-config1 {
+ linux,udma-mode = <UDMA_PKT_MODE>;
+ statictr-type = <PSIL_STATIC_TR_NONE>;
+ ti,needs-epib;
+ ti,psd-size = <16>;
+ };
+
+ ti,psil-config2 {
+ linux,udma-mode = <UDMA_PKT_MODE>;
+ statictr-type = <PSIL_STATIC_TR_NONE>;
+ ti,needs-epib;
+ ti,psd-size = <16>;
+ };
+
+ ti,psil-config3 {
+ linux,udma-mode = <UDMA_PKT_MODE>;
+ statictr-type = <PSIL_STATIC_TR_NONE>;
+ ti,needs-epib;
+ ti,psd-size = <16>;
+ };
+
+ ti,psil-config4 {
+ linux,udma-mode = <UDMA_PKT_MODE>;
+ statictr-type = <PSIL_STATIC_TR_NONE>;
+ ti,needs-epib;
+ ti,psd-size = <16>;
+ };
+
+ ti,psil-config5 {
+ linux,udma-mode = <UDMA_PKT_MODE>;
+ statictr-type = <PSIL_STATIC_TR_NONE>;
+ ti,needs-epib;
+ ti,psd-size = <16>;
+ };
+
+ ti,psil-config6 {
+ linux,udma-mode = <UDMA_PKT_MODE>;
+ statictr-type = <PSIL_STATIC_TR_NONE>;
+ ti,needs-epib;
+ ti,psd-size = <16>;
+ };
+
+ ti,psil-config7 {
+ linux,udma-mode = <UDMA_PKT_MODE>;
+ statictr-type = <PSIL_STATIC_TR_NONE>;
+ ti,needs-epib;
+ ti,psd-size = <16>;
+ };
+ };
};
&secure_proxy_main {
@@ -52,6 +237,29 @@
&wkup_pmx0 {
u-boot,dm-spl;
+ mcu_cpsw_pins_default: mcu_cpsw_pins_default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */
+ J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */
+ J721E_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* (M2) MCU_RGMII1_TD3 */
+ J721E_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* (M3) MCU_RGMII1_TD2 */
+ J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* (M4) MCU_RGMII1_TD1 */
+ J721E_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* (M5) MCU_RGMII1_TD0 */
+ J721E_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */
+ J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */
+ J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */
+ J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */
+ J721E_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */
+ J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */
+ >;
+ };
+
+ mcu_mdio_pins_default: mcu_mdio1_pins_default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
+ J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
+ >;
+ };
};
&main_pmx0 {
@@ -73,3 +281,33 @@
&main_sdhci1 {
u-boot,dm-spl;
};
+
+&mcu_cpsw {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+};
+
+&cpsw_port1 {
+ phy-mode = "rgmii-rxid";
+ phy-handle = <&phy0>;
+};
+
+&mcu_cpsw {
+ reg = <0x0 0x46000000 0x0 0x200000>,
+ <0x0 0x40f00200 0x0 0x2>;
+ reg-names = "cpsw_nuss", "mac_efuse";
+
+ cpsw-phy-sel@40f04040 {
+ compatible = "ti,am654-cpsw-phy-sel";
+ reg= <0x0 0x40f04040 0x0 0x4>;
+ reg-names = "gmii-sel";
+ };
+};