* Patches by David Müller, 12 Jun 2003:
- rewrite of the S3C24X0 register definitions stuff
- "driver" for the built-in S3C24X0 RTC
* Patches by Yuli Barcohen, 12 Jun 2003:
- Add MII support and Ethernet PHY initialization for MPC8260ADS board
- Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
configuration word supplied by FPGA on some MPC8260ADS boards
* Patch by Pantelis Antoniou, 10 Jun 2003:
Unify status LED interface
diff --git a/board/smdk2410/smdk2410.c b/board/smdk2410/smdk2410.c
index 7f983ef..207cd44 100644
--- a/board/smdk2410/smdk2410.c
+++ b/board/smdk2410/smdk2410.c
@@ -68,38 +68,40 @@
int board_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
/* to reduce PLL lock time, adjust the LOCKTIME register */
- rLOCKTIME = 0xFFFFFF;
+ clk_power->LOCKTIME = 0xFFFFFF;
/* configure MPLL */
- rMPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
/* some delay between MPLL and UPLL */
delay (4000);
/* configure UPLL */
- rUPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
/* some delay between MPLL and UPLL */
delay (8000);
/* set up the I/O ports */
- rGPACON = 0x007FFFFF;
- rGPBCON = 0x00044555;
- rGPBUP = 0x000007FF;
- rGPCCON = 0xAAAAAAAA;
- rGPCUP = 0x0000FFFF;
- rGPDCON = 0xAAAAAAAA;
- rGPDUP = 0x0000FFFF;
- rGPECON = 0xAAAAAAAA;
- rGPEUP = 0x0000FFFF;
- rGPFCON = 0x000055AA;
- rGPFUP = 0x000000FF;
- rGPGCON = 0xFF95FFBA;
- rGPGUP = 0x0000FFFF;
- rGPHCON = 0x002AFAAA;
- rGPHUP = 0x000007FF;
+ gpio->GPACON = 0x007FFFFF;
+ gpio->GPBCON = 0x00044555;
+ gpio->GPBUP = 0x000007FF;
+ gpio->GPCCON = 0xAAAAAAAA;
+ gpio->GPCUP = 0x0000FFFF;
+ gpio->GPDCON = 0xAAAAAAAA;
+ gpio->GPDUP = 0x0000FFFF;
+ gpio->GPECON = 0xAAAAAAAA;
+ gpio->GPEUP = 0x0000FFFF;
+ gpio->GPFCON = 0x000055AA;
+ gpio->GPFUP = 0x000000FF;
+ gpio->GPGCON = 0xFF95FFBA;
+ gpio->GPGUP = 0x0000FFFF;
+ gpio->GPHCON = 0x002AFAAA;
+ gpio->GPHUP = 0x000007FF;
/* arch number of SMDK2410-Board */
gd->bd->bi_arch_number = 193;