include/configs: Use new CONFIG_CMD_* in various h* named board config files.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
diff --git a/include/configs/hermes.h b/include/configs/hermes.h
index 91117ba..f1cc8d2 100644
--- a/include/configs/hermes.h
+++ b/include/configs/hermes.h
@@ -64,23 +64,21 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_COMMANDS CONFIG_CMD_DFL
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
-/*----------------------------------------------------------------------*/
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-/*----------------------------------------------------------------------*/
-
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -157,7 +155,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index 4d813d8..7e1897a 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -38,11 +38,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
#define CONFIG_BOARD_EARLY_INIT_R
/*
@@ -55,22 +50,22 @@
/* Partitions */
#define CONFIG_DOS_PARTITION
-/*
- * Supported commands
- */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DISPLAY | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_SNTP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DISPLAY
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SNTP
+
#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
@@ -222,7 +217,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -231,6 +226,11 @@
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/* Enable an alternate, more extensive memory test */
#define CFG_ALT_MEMTEST
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 8cad98d..0fdfb15 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -174,32 +174,34 @@
#define CONFIG_LAST_STAGE_INIT
-#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
- CFG_CMD_BEDBUG | \
- CFG_CMD_BMP | \
- CFG_CMD_DISPLAY | \
- CFG_CMD_DOC | \
- CFG_CMD_EXT2 | \
- CFG_CMD_FDC | \
- CFG_CMD_FDOS | \
- CFG_CMD_FPGA | \
- CFG_CMD_HWFLOW | \
- CFG_CMD_IDE | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_NAND | \
- CFG_CMD_MMC | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_PCI | \
- CFG_CMD_USB | \
- CFG_CMD_REISER | \
- CFG_CMD_SCSI | \
- CFG_CMD_SPI | \
- CFG_CMD_UNIVERSE| \
- CFG_CMD_VFD | \
- CFG_CMD_XIMG ) )
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_BMP
+#undef CONFIG_CMD_DISPLAY
+#undef CONFIG_CMD_DOC
+#undef CONFIG_CMD_EXT2
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_PCI
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_REISER
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_UNIVERSE
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_XIMG
+
#ifdef DEBUG
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
@@ -218,7 +220,7 @@
#define DEBUG_BOOTKEYS 0
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
@@ -247,7 +249,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -400,7 +402,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value*/
#endif