ColdFire: Remove R5200 board
This board never went into production
Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com>
Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: John Rigby <jrigby@freescale.com>
diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S
index f6c58c2..9e496a4 100644
--- a/cpu/mcf52x2/start.S
+++ b/cpu/mcf52x2/start.S
@@ -56,9 +56,7 @@
_vectors:
.long 0x00000000 /* Flash offset is 0 until we setup CS0 */
-#if defined(CONFIG_R5200)
-.long 0x400
-#elif defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE)
+#if defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE)
.long _start - TEXT_BASE
#else
.long _START
@@ -185,18 +183,6 @@
movec %d0, %VBR
#endif
-#ifdef CONFIG_R5200
- move.l #(_flash_setup-CFG_FLASH_BASE), %a0
- move.l #(_flash_setup_end-CFG_FLASH_BASE), %a1
- move.l #(CFG_INIT_RAM_ADDR), %a2
-_copy_flash:
- move.l (%a0)+, (%a2)+
- cmp.l %a0, %a1
- bgt.s _copy_flash
- jmp CFG_INIT_RAM_ADDR
-_after_flash_copy:
-#endif
-
#ifdef CONFIG_M5275
/* Initialize IPSBAR */
move.l #(CFG_MBAR + 1), %d0 /* set IPSBAR address + valid flag */
@@ -230,24 +216,6 @@
/*------------------------------------------------------------------------------*/
-#ifdef CONFIG_R5200
-_flash_setup:
- /* CSAR0 */
- move.l #((CFG_FLASH_BASE & 0xffff0000) >> 16), %d0
- move.w %d0, 0x40000080
-
- /* CSCR0 */
- move.l #0x2180, %d0 /* 8 wait states, 16bit port, auto ack, */
- move.w %d0, 0x4000008A
-
- /* CSMR0 */
- move.l #0x001f0001, %d0 /* 2 MB, valid */
- move.l %d0, 0x40000084
-
- jmp _after_flash_copy.L
-_flash_setup_end:
-#endif
-
/*
* void relocate_code (addr_sp, gd, addr_moni)
*