OMAP242x H4 board update
- fix for ES2 differences.
- switch to using the cfi_flash driver.
- fix SRAM build address.
- fix for GP device operation.
- unlock SRAM for GP devices.
- display more device information.
- fix potential deadlock in omap24xx_i2c driver.
- fix DLL load values to match dpllout*1 operation.
- fix 2nd chip select init for combo DDR device.
- add support for CFI Intel 28F256L18 on H4 board.
Patch by Richard Woodruff, 03 Mar 2005
diff --git a/CHANGELOG b/CHANGELOG
index 21944f8..a82a9a6 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,19 @@
Changes for U-Boot 1.1.4:
======================================================================
+* OMAP242x H4 board update
+ - fix for ES2 differences.
+ - switch to using the cfi_flash driver.
+ - fix SRAM build address.
+ - fix for GP device operation.
+ - unlock SRAM for GP devices.
+ - display more device information.
+ - fix potential deadlock in omap24xx_i2c driver.
+ - fix DLL load values to match dpllout*1 operation.
+ - fix 2nd chip select init for combo DDR device.
+ - add support for CFI Intel 28F256L18 on H4 board.
+ Patch by Richard Woodruff, 03 Mar 2005
+
* Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
Patch by Steven Scholz, 02 Mar 2005
diff --git a/board/omap2420h4/Makefile b/board/omap2420h4/Makefile
index deab6b6..38dec00 100644
--- a/board/omap2420h4/Makefile
+++ b/board/omap2420h4/Makefile
@@ -25,7 +25,7 @@
LIB = lib$(BOARD).a
-OBJS := omap2420h4.o flash.o mem.o sys_info.o
+OBJS := omap2420h4.o mem.o sys_info.o
SOBJS := platform.o
$(LIB): $(OBJS) $(SOBJS)
diff --git a/board/omap2420h4/config.mk b/board/omap2420h4/config.mk
index e6aa756..3edcde0 100644
--- a/board/omap2420h4/config.mk
+++ b/board/omap2420h4/config.mk
@@ -19,4 +19,10 @@
# Used with full SRAM boot.
# This is either with a GP system or a signed boot image.
# easiest, and safest way to go if you can.
-#TEXT_BASE = 0x40280000
+#TEXT_BASE = 0x40270000
+
+
+# Handy to get symbols to debug ROM version.
+#TEXT_BASE = 0x0
+#TEXT_BASE = 0x08000000
+#TEXT_BASE = 0x04000000
diff --git a/board/omap2420h4/mem.c b/board/omap2420h4/mem.c
index 9ae595b..62eb6e3 100644
--- a/board/omap2420h4/mem.c
+++ b/board/omap2420h4/mem.c
@@ -48,7 +48,7 @@
*********************************************************************************/
void prcm_init(void)
{
- u32 rev,div;
+ u32 div;
void (*f_lock_pll) (u32, u32, u32, u32);
extern void *_end_vect, *_start;
@@ -64,11 +64,7 @@
__raw_writel(DSP_DIV, CM_CLKSEL_DSP); /* set dsp and iva dividers */
__raw_writel(GFX_DIV, CM_CLKSEL_GFX); /* set gfx dividers */
- rev = get_cpu_rev();
- if (rev == CPU_2420_ES1 || rev == CPU_2422_ES1)
- div = BUS_DIV_ES1;
- else
- div = BUS_DIV;
+ div = BUS_DIV;
__raw_writel(div, CM_CLKSEL1_CORE);/* set L3/L4/USB/Display/Vlnc/SSi dividers */
sdelay(1000);
@@ -99,6 +95,23 @@
sdelay(1000);
}
+/**************************************************************************
+ * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow
+ * command line mem=xyz use all memory with out discontigious support
+ * compiled in. Could do it at the ATAG, but there really is two banks...
+ * Called as part of 2nd phase DDR init.
+ **************************************************************************/
+void make_cs1_contiguous(void)
+{
+ u32 size, a_add_low, a_add_high;
+
+ size = get_sdr_cs_size(SDRC_CS0_OSET);
+ size /= SZ_32M; /* find size to offset CS1 */
+ a_add_high = (size & 3) << 8; /* set up low field */
+ a_add_low = (size & 0x3C) >> 2; /* set up high field */
+ __raw_writel((a_add_high|a_add_low),SDRC_CS_CFG);
+
+}
/********************************************************
* mem_ok() - test used to see if timings are correct
@@ -122,6 +135,7 @@
return(1);
}
+
/********************************************************
* sdrc_init() - init the sdrc chip selects CS0 and CS1
* - early init routines, called from flash or
@@ -148,28 +162,29 @@
**************************************************************************/
void do_sdrc_init(u32 offset, u32 early)
{
- u32 cpu, bug=0, rev, common=0, cs0=0, pmask=0, pass_type;
+ u32 cpu, dllen=0, rev, common=0, cs0=0, pmask=0, pass_type, mtype;
sdrc_data_t *sdata; /* do not change type */
u32 a, b, r;
static const sdrc_data_t sdrc_2422 =
{
H4_2422_SDRC_SHARING, H4_2422_SDRC_MDCFG_0_DDR, 0 , H4_2422_SDRC_ACTIM_CTRLA_0,
- H4_2422_SDRC_ACTIM_CTRLB_0, H4_2422_SDRC_RFR_CTRL_ES1, H4_2422_SDRC_MR_0_DDR,
- 0, H4_2422_SDRC_DLLA_CTRL, H4_2422_SDRC_DLLB_CTRL
+ H4_2422_SDRC_ACTIM_CTRLB_0, H4_2422_SDRC_RFR_CTRL, H4_2422_SDRC_MR_0_DDR,
+ 0, H4_2422_SDRC_DLLAB_CTRL
};
static const sdrc_data_t sdrc_2420 =
{
H4_2420_SDRC_SHARING, H4_2420_SDRC_MDCFG_0_DDR, H4_2420_SDRC_MDCFG_0_SDR,
H4_2420_SDRC_ACTIM_CTRLA_0, H4_2420_SDRC_ACTIM_CTRLB_0,
- H4_2420_SDRC_RFR_CTRL_ES1, H4_2420_SDRC_MR_0_DDR, H4_2420_SDRC_MR_0_SDR,
- H4_2420_SDRC_DLLA_CTRL, H4_2420_SDRC_DLLB_CTRL
+ H4_2420_SDRC_RFR_CTRL, H4_2420_SDRC_MR_0_DDR, H4_2420_SDRC_MR_0_SDR,
+ H4_2420_SDRC_DLLAB_CTRL
};
if (offset == SDRC_CS0_OSET)
cs0 = common = 1; /* int regs shared between both chip select */
cpu = get_cpu_type();
+ rev = get_cpu_rev();
/* warning generated, though code generation is correct. this may bite later,
* but is ok for now. there is only so much C code you can do on stack only
@@ -197,9 +212,15 @@
if(running_from_internal_boot())
sdata = (sdrc_data_t *)((u32)sdata + 0x4000);
}
- if (!early && (get_mem_type() == DDR_COMBO)) {/* combo part has a shared CKE signal, can't use feature */
- pmask = BIT2;
- pass_type = COMBO_DDR; /* CS1 config */
+
+ if (!early && (((mtype = get_mem_type()) == DDR_COMBO)||(mtype == DDR_STACKED))) {
+ if(mtype == DDR_COMBO){
+ pmask = BIT2;/* combo part has a shared CKE signal, can't use feature */
+ pass_type = COMBO_DDR; /* CS1 config */
+ __raw_writel((__raw_readl(SDRC_POWER)) & ~pmask, SDRC_POWER);
+ }
+ if(rev != CPU_2420_2422_ES1) /* for es2 and above smooth things out */
+ make_cs1_contiguous();
}
next_mem_type:
@@ -208,11 +229,10 @@
wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000);/* wait till reset done set */
__raw_writel(0, SDRC_SYSCONFIG); /* clear soft reset */
__raw_writel(sdata->sdrc_sharing, SDRC_SHARING);
- __raw_writel((__raw_readl(SDRC_POWER)) & ~pmask, SDRC_POWER);
#ifdef POWER_SAVE
__raw_writel(__raw_readl(SMS_SYSCONFIG)|SMART_IDLE, SMS_SYSCONFIG);
__raw_writel(sdata->sdrc_sharing|SMART_IDLE, SDRC_SHARING);
- __raw_writel((__raw_readl(SDRC_POWER)|BIT6) & ~pmask, SDRC_POWER);
+ __raw_writel((__raw_readl(SDRC_POWER)|BIT6), SDRC_POWER);
#endif
}
@@ -224,15 +244,16 @@
__raw_writel(sdata->sdrc_mdcfg_0_sdr, SDRC_MCFG_0+offset);
}
- if(pass_type == IP_SDR){ /* SDRAM can run full speed only rated for 105MHz*/
- a = H4_242X_SDRC_ACTIM_CTRLA_0_100MHz;
- b = H4_242X_SDRC_ACTIM_CTRLB_0_100MHz;
- r = H4_2420_SDRC_RFR_CTRL;
- } else {
- a = sdata->sdrc_actim_ctrla_0;
- b = sdata->sdrc_actim_ctrlb_0;
- r = sdata->sdrc_rfr_ctrl;
- }
+ a = sdata->sdrc_actim_ctrla_0;
+ b = sdata->sdrc_actim_ctrlb_0;
+ r = sdata->sdrc_dllab_ctrl;
+
+ /* work around ES1 DDR issues */
+ if((pass_type != IP_SDR) && (rev == CPU_2420_2422_ES1)){
+ a = H4_242x_SDRC_ACTIM_CTRLA_0_ES1;
+ b = H4_242x_SDRC_ACTIM_CTRLB_0_ES1;
+ r = H4_242x_SDRC_RFR_CTRL_ES1;
+ }
if (cs0) {
__raw_writel(a, SDRC_ACTIM_CTRLA_0);
@@ -241,7 +262,6 @@
__raw_writel(a, SDRC_ACTIM_CTRLA_1);
__raw_writel(b, SDRC_ACTIM_CTRLB_1);
}
-
__raw_writel(r, SDRC_RFR_CTRL+offset);
/* init sequence for mDDR/mSDR using manual commands (DDR is a bit different) */
@@ -263,18 +283,22 @@
__raw_writel(sdata->sdrc_mr_0_ddr, SDRC_MR_0+offset);
/* NOTE: ES1 242x _BUG_ DLL + External Bandwidth fix*/
- rev = get_cpu_rev();
- if (rev == CPU_2420_ES1 || rev == CPU_2422_ES1){
- bug = BIT0;
+ if (rev == CPU_2420_2422_ES1){
+ dllen = (BIT0|BIT3); /* es1 clear both bit0 and bit3 */
__raw_writel((__raw_readl(SMS_CLASS_ARB0)|BURSTCOMPLETE_GROUP7)
,SMS_CLASS_ARB0);/* enable bust complete for lcd */
}
- /* enable & load up DLL with good value for 75MHz, and set phase to 90% */
+ else
+ dllen = BIT0|BIT1; /* es2, clear bit0, and 1 (set phase to 72) */
+
+ /* enable & load up DLL with good value for 75MHz, and set phase to 90
+ * ES1 recommends 90 phase, ES2 recommends 72 phase.
+ */
if (common && (pass_type != IP_SDR)) {
- __raw_writel(sdata->sdrc_dlla_ctrl, SDRC_DLLA_CTRL);
- __raw_writel(sdata->sdrc_dlla_ctrl & ~(BIT2|bug), SDRC_DLLA_CTRL);
- __raw_writel(sdata->sdrc_dllb_ctrl, SDRC_DLLB_CTRL);
- __raw_writel(sdata->sdrc_dllb_ctrl & ~(BIT2|bug) , SDRC_DLLB_CTRL);
+ __raw_writel(sdata->sdrc_dllab_ctrl, SDRC_DLLA_CTRL);
+ __raw_writel(sdata->sdrc_dllab_ctrl & ~(BIT2|dllen), SDRC_DLLA_CTRL);
+ __raw_writel(sdata->sdrc_dllab_ctrl, SDRC_DLLB_CTRL);
+ __raw_writel(sdata->sdrc_dllab_ctrl & ~(BIT2|dllen) , SDRC_DLLB_CTRL);
}
sdelay(90000);
@@ -291,12 +315,18 @@
*****************************************************/
void gpmc_init(void)
{
- u32 mux=0, mtype, mwidth;
+ u32 mux=0, mtype, mwidth, rev, tval;
+
+ rev = get_cpu_rev();
+ if (rev == CPU_2420_2422_ES1)
+ tval = 1;
+ else
+ tval = 0; /* disable bit switched meaning */
/* global settings */
__raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */
__raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */
- __raw_writel(0x1, GPMC_TIMEOUT_CONTROL);/* timeout disable */
+ __raw_writel(tval, GPMC_TIMEOUT_CONTROL);/* timeout disable */
#ifdef CFG_NAND_BOOT
__raw_writel(0x001, GPMC_CONFIG); /* set nWP, disable limited addr */
#else
diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c
index 219bcf4..c729eca 100644
--- a/board/omap2420h4/omap2420h4.c
+++ b/board/omap2420h4/omap2420h4.c
@@ -36,7 +36,7 @@
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
#endif
-static void wait_for_command_complete(unsigned int wd_base);
+ void wait_for_command_complete(unsigned int wd_base);
/*******************************************************
* Routine: delay
@@ -83,6 +83,21 @@
}
/**********************************************************
+ * Routine: try_unlock_sram()
+ * Description: If chip is GP type, unlock the SRAM for
+ * general use.
+ ***********************************************************/
+void try_unlock_sram(void)
+{
+ /* if GP device unlock device SRAM for general use */
+ if (get_device_type() == GP_DEVICE) {
+ __raw_writel(0xFF, A_REQINFOPERM0);
+ __raw_writel(0xCFDE, A_READPERM0);
+ __raw_writel(0xCFDE, A_WRITEPERM0);
+ }
+}
+
+/**********************************************************
* Routine: s_init
* Description: Does early system init of muxing and clocks.
* - Called path is with sram stack.
@@ -144,7 +159,7 @@
* Routine: wait_for_command_complete
* Description: Wait for posting to finish on watchdog
******************************************************/
-static void wait_for_command_complete(unsigned int wd_base)
+void wait_for_command_complete(unsigned int wd_base)
{
int pending = 1;
do {
@@ -200,7 +215,7 @@
{
DECLARE_GLOBAL_DATA_PTR;
unsigned int size0=0,size1=0;
- u32 mtype, btype;
+ u32 mtype, btype, rev, cpu;
u8 chg_on = 0x5; /* enable charge of back up battery */
u8 vmode_on = 0x8C;
#define NOT_EARLY 0
@@ -209,6 +224,8 @@
btype = get_board_type();
mtype = get_mem_type();
+ rev = get_cpu_rev();
+ cpu = get_cpu_type();
display_board_info(btype);
if (btype == BOARD_H4_MENELAUS){
@@ -219,15 +236,16 @@
if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY); /* init other chip select */
- size0 = size1 = SZ_32M;
- } else if (mtype == SDR_DISCRETE)
- size0 = SZ_128M;
- else
- size0 = SZ_64M;
+ }
+ size0 = get_sdr_cs_size(SDRC_CS0_OSET);
+ size1 = get_sdr_cs_size(SDRC_CS1_OSET);
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = size0;
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ if(rev == CPU_2420_2422_ES1) /* ES1's 128MB remap granularity isn't worth doing */
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ else /* ES2 and above can remap at 32MB granularity */
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_1+size0;
gd->bd->bi_dram[1].size = size1;
return 0;
diff --git a/board/omap2420h4/sys_info.c b/board/omap2420h4/sys_info.c
index 121d679..9864d3e 100644
--- a/board/omap2420h4/sys_info.c
+++ b/board/omap2420h4/sys_info.c
@@ -29,6 +29,16 @@
#include <i2c.h>
/**************************************************************************
+ * get_prod_id() - get id info from chips
+ ***************************************************************************/
+static u32 get_prod_id(void)
+{
+ u32 p;
+ p = __raw_readl(PRODUCTION_ID); /* get production ID */
+ return((p & CPU_242X_PID_MASK) >> 16);
+}
+
+/**************************************************************************
* get_cpu_type() - low level get cpu type
* - no C globals yet.
* - just looking to say if this is a 2422 or 2420 or ...
@@ -40,6 +50,14 @@
{
u32 v;
+ switch(get_prod_id()){
+ case 1:;/* 2420 */
+ case 2: return(CPU_2420); break; /* 2420 pop */
+ case 4: return(CPU_2422); break;
+ case 8: return(CPU_2423); break;
+ default: break; /* early 2420/2422's unmarked */
+ }
+
v = __raw_readl(TAP_IDCODE_REG);
v &= CPU_24XX_ID_MASK;
if (v == CPU_2420_CHIPID) { /* currently 2420 and 2422 have same id */
@@ -61,6 +79,16 @@
v = v >> 28;
return(v+1); /* currently 2422 and 2420 match up */
}
+/****************************************************
+ * is_mem_sdr() - return 1 if mem type in use is SDR
+ ****************************************************/
+u32 is_mem_sdr(void)
+{
+ volatile u32 *burst = (volatile u32 *)(SDRC_MR_0+SDRC_CS0_OSET);
+ if(*burst == H4_2420_SDRC_MR_0_SDR)
+ return(1);
+ return(0);
+}
/***********************************************************
* get_mem_type() - identify type of mDDR part used.
@@ -70,24 +98,40 @@
*************************************************************/
u32 get_mem_type(void)
{
- volatile u32 *burst = (volatile u32 *)(SDRC_MR_0+SDRC_CS0_OSET);
+ u32 cpu, sdr = is_mem_sdr();
- if (get_cpu_type() == CPU_2422)
+ cpu = get_cpu_type();
+ if (cpu == CPU_2422 || cpu == CPU_2423)
return(DDR_STACKED);
+ if(get_prod_id() == 0x2)
+ return(XDR_POP);
+
if (get_board_type() == BOARD_H4_MENELAUS)
- if(*burst == H4_2420_SDRC_MR_0_SDR)
+ if(sdr)
return(SDR_DISCRETE);
else
return(DDR_COMBO);
else
- if(*burst == H4_2420_SDRC_MR_0_SDR) /* SDP + SDR kit */
+ if(sdr) /* SDP + SDR kit */
return(SDR_DISCRETE);
else
return(DDR_DISCRETE); /* origional SDP */
}
/***********************************************************************
+ * get_cs0_size() - get size of chip select 0/1
+ ************************************************************************/
+u32 get_sdr_cs_size(u32 offset)
+{
+ u32 size;
+ size = __raw_readl(SDRC_MCFG_0+offset) >> 8; /* get ram size field */
+ size &= 0x2FF; /* remove unwanted bits */
+ size *= SZ_2M; /* find size in MB */
+ return(size);
+}
+
+/***********************************************************************
* get_board_type() - get board type based on current production stats.
* --- NOTE: 2 I2C EEPROMs will someday be populated with proper info.
* when they are available we can get info from there. This should
@@ -104,7 +148,7 @@
/******************************************************************
* get_sysboot_value() - get init word settings (dip switch on h4)
******************************************************************/
-u32 get_sysboot_value(void)
+inline u32 get_sysboot_value(void)
{
return(0x00000FFF & __raw_readl(CONTROL_STATUS));
}
@@ -193,22 +237,53 @@
*********************************************************************/
void display_board_info(u32 btype)
{
- char cpu_2420[] = "2420";
+ char cpu_2420[] = "2420"; /* cpu type */
char cpu_2422[] = "2422";
- char db_men[] = "Menelaus";
- char db_ip[]= "IP";
- char *cpu_s, *db_s;
- u32 cpu = get_cpu_type();
+ char cpu_2423[] = "2423";
+ char db_men[] = "Menelaus"; /* board type */
+ char db_ip[] = "IP";
+ char mem_sdr[] = "mSDR"; /* memory type */
+ char mem_ddr[] = "mDDR";
+ char t_tst[] = "TST"; /* security level */
+ char t_emu[] = "EMU";
+ char t_hs[] = "HS";
+ char t_gp[] = "GP";
+ char unk[] = "?";
- if(cpu == CPU_2420)
- cpu_s = cpu_2420;
+ char *cpu_s, *db_s, *mem_s, *sec_s;
+ u32 cpu, rev, sec;
+
+ rev = get_cpu_rev();
+ cpu = get_cpu_type();
+ sec = get_device_type();
+
+ if(is_mem_sdr())
+ mem_s = mem_sdr;
else
+ mem_s = mem_ddr;
+
+ if(cpu == CPU_2423)
+ cpu_s = cpu_2423;
+ else if (cpu == CPU_2422)
cpu_s = cpu_2422;
+ else
+ cpu_s = cpu_2420;
+
if(btype == BOARD_H4_MENELAUS)
db_s = db_men;
else
db_s = db_ip;
- printf("TI H4 SDP Base Board with OMAP%s %s Daughter Board\n",cpu_s, db_s);
+
+ switch(sec){
+ case TST_DEVICE: sec_s = t_tst; break;
+ case EMU_DEVICE: sec_s = t_emu; break;
+ case HS_DEVICE: sec_s = t_hs; break;
+ case GP_DEVICE: sec_s = t_gp; break;
+ default: sec_s = unk;
+ }
+
+ printf("OMAP%s-%s revision %d\n", cpu_s, sec_s, rev-1);
+ printf("TI H4 SDP Base Board + %s Daughter Board + %s \n", db_s, mem_s);
}
/*************************************************************************
@@ -230,7 +305,7 @@
/********************************************************
* get_base(); get upper addr of current execution
*******************************************************/
-static u32 get_base(void)
+u32 get_base(void)
{
u32 val;
__asm__ __volatile__("mov %0, pc \n" : "=r" (val) : : "memory");
@@ -242,7 +317,7 @@
/********************************************************
* get_base2(); get 2upper addr of current execution
*******************************************************/
-static u32 get_base2(void)
+u32 get_base2(void)
{
u32 val;
__asm__ __volatile__("mov %0, pc \n" : "=r" (val) : : "memory");
@@ -300,3 +375,14 @@
else
return(0);
}
+
+/*************************************************************
+ * get_device_type(): tell if GP/HS/EMU/TST
+ *************************************************************/
+u32 get_device_type(void)
+{
+ int mode;
+ mode = __raw_readl(CONTROL_STATUS) & (BIT10|BIT9|BIT8);
+ return(mode >>= 8);
+}
+
diff --git a/drivers/omap24xx_i2c.c b/drivers/omap24xx_i2c.c
index 383dfcb..7dab786 100644
--- a/drivers/omap24xx_i2c.c
+++ b/drivers/omap24xx_i2c.c
@@ -32,12 +32,16 @@
static void wait_for_bb (void);
static u16 wait_for_pin (void);
-void flush_fifo(void);
+static void flush_fifo(void);
void i2c_init (int speed, int slaveadd)
{
u16 scl;
+ outw(0x2, I2C_SYSC); /* for ES2 after soft reset */
+ udelay(1000);
+ outw(0x0, I2C_SYSC); /* will probably self clear but */
+
if (inw (I2C_CON) & I2C_CON_EN) {
outw (0, I2C_CON);
udelay (50000);
@@ -52,11 +56,14 @@
/* own address */
outw (slaveadd, I2C_OA);
outw (I2C_CON_EN, I2C_CON);
- outw (0, I2C_CNT);
+
/* have to enable intrrupts or OMAP i2c module doesn't work */
outw (I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
I2C_IE_NACK_IE | I2C_IE_AL_IE, I2C_IE);
udelay (1000);
+ flush_fifo();
+ outw (0xFFFF, I2C_STAT);
+ outw (0, I2C_CNT);
}
static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
@@ -160,11 +167,15 @@
}
if (!i2c_error) {
+ int eout = 200;
+
outw (I2C_CON_EN, I2C_CON);
while ((stat = inw (I2C_STAT)) || (inw (I2C_CON) & I2C_CON_MST)) {
udelay (1000);
/* have to read to clear intrrupt */
outw (0xFFFF, I2C_STAT);
+ if(--eout == 0) /* better leave with error than hang */
+ break;
}
}
flush_fifo();
@@ -173,7 +184,7 @@
return i2c_error;
}
-void flush_fifo(void)
+static void flush_fifo(void)
{ u16 stat;
/* note: if you try and read data when its not there or ready
diff --git a/include/asm-arm/arch-arm1136/clocks.h b/include/asm-arm/arch-arm1136/clocks.h
index bd1b088..2a95af1 100644
--- a/include/asm-arm/arch-arm1136/clocks.h
+++ b/include/asm-arm/arch-arm1136/clocks.h
@@ -57,8 +57,7 @@
#define II_MPU_DIV 0x2 /* mpu = core/2 */
#define II_DSP_DIV 0x343 /* dsp & iva divider */
#define II_GFX_DIV 0x2
-#define II_BUS_DIV 0x04600C26
-#define II_BUS_DIV_ES1 0x04601026
+#define II_BUS_DIV 0x04601026
#define II_DPLL_300 0x01832100
/****************************************************************************;
@@ -87,8 +86,7 @@
#define III_MPU_DIV 0x2 /* mpu = core/2 */
#define III_DSP_DIV 0x23C3 /* dsp & iva divider sych enabled*/
#define III_GFX_DIV 0x2
-#define III_BUS_DIV 0x08300c44
-#define III_BUS_DIV_ES1 0x08301044
+#define III_BUS_DIV 0x08301044
#define III_DPLL_266 0x01885500
/* set defaults for boot up */
@@ -98,7 +96,6 @@
# define DSP_DIV II_DSP_DIV
# define GFX_DIV II_GFX_DIV
# define BUS_DIV II_BUS_DIV
-# define BUS_DIV_ES1 II_BUS_DIV_ES1
# define DPLL_VAL II_DPLL_300
#elif PRCM_CONFIG_III
# define DPLL_OUT III_DPLL_OUT_X2
@@ -106,7 +103,6 @@
# define DSP_DIV III_DSP_DIV
# define GFX_DIV III_GFX_DIV
# define BUS_DIV III_BUS_DIV
-# define BUS_DIV_ES1 III_BUS_DIV_ES1
# define DPLL_VAL III_DPLL_266
#endif
diff --git a/include/asm-arm/arch-arm1136/i2c.h b/include/asm-arm/arch-arm1136/i2c.h
index 3e37f4d..7248950 100644
--- a/include/asm-arm/arch-arm1136/i2c.h
+++ b/include/asm-arm/arch-arm1136/i2c.h
@@ -33,6 +33,7 @@
#define I2C_BUF (I2C_BASE + 0x14)
#define I2C_CNT (I2C_BASE + 0x18)
#define I2C_DATA (I2C_BASE + 0x1c)
+#define I2C_SYSC (I2C_BASE + 0x20)
#define I2C_CON (I2C_BASE + 0x24)
#define I2C_OA (I2C_BASE + 0x28)
#define I2C_SA (I2C_BASE + 0x2c)
diff --git a/include/asm-arm/arch-arm1136/mem.h b/include/asm-arm/arch-arm1136/mem.h
index dfaf568..c81f1c4 100644
--- a/include/asm-arm/arch-arm1136/mem.h
+++ b/include/asm-arm/arch-arm1136/mem.h
@@ -13,7 +13,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -25,8 +25,8 @@
#ifndef _OMAP24XX_MEM_H_
#define _OMAP24XX_MEM_H_
-#define SDRC_CS0_OSET 0x0
-#define SDRC_CS1_OSET 0x30 /* mirror CS1 regs appear offset 0x30 from CS0 */
+#define SDRC_CS0_OSET 0x0
+#define SDRC_CS1_OSET 0x30 /* mirror CS1 regs appear offset 0x30 from CS0 */
#ifndef __ASSEMBLY__
/* struct's for holding data tables for current boards, they are getting used
@@ -40,8 +40,7 @@
u32 sdrc_rfr_ctrl;
u32 sdrc_mr_0_ddr;
u32 sdrc_mr_0_sdr;
- u32 sdrc_dlla_ctrl;
- u32 sdrc_dllb_ctrl;
+ u32 sdrc_dllab_ctrl;
} /*__attribute__ ((packed))*/;
typedef struct sdrc_data_s sdrc_data_t;
@@ -49,129 +48,109 @@
STACKED = 0,
IP_DDR = 1,
COMBO_DDR = 2,
- IP_SDR = 3,
+ IP_SDR = 3,
} mem_t;
#endif
/* Slower full frequency range default timings for x32 operation*/
-#define H4_2420_SDRC_SHARING 0x00000100
+#define H4_2420_SDRC_SHARING 0x00000100
#define H4_2420_SDRC_MDCFG_0_SDR 0x00D04010 /* discrete sdr module */
#define H4_2420_SDRC_MR_0_SDR 0x00000031
#define H4_2420_SDRC_MDCFG_0_DDR 0x01702011 /* descrite ddr module */
#define H4_2420_COMBO_MDCFG_0_DDR 0x00801011 /* combo module */
#define H4_2420_SDRC_MR_0_DDR 0x00000032
-#ifndef CONFIG_OPTIMIZE_DDR
-# define H4_2420_SDRC_ACTIM_CTRLA_0 0x9bead909
-# define H4_2420_SDRC_ACTIM_CTRLB_0 0x00000014
-# define H4_2420_SDRC_RFR_CTRL_ES1 0x00002401
-# define H4_2420_SDRC_RFR_CTRL 0x0002da01
-#endif
-#define H4_2420_SDRC_DLLA_CTRL 0x0000E307 /* DLL value used for 50MHz */
-#define H4_2420_SDRC_DLLB_CTRL 0x0000E307 /* allow DPLLout*1 to work */
-
#define H4_2422_SDRC_SHARING 0x00004b00
#define H4_2422_SDRC_MDCFG_0_DDR 0x00801011 /* stacked ddr on 2422 */
-#ifndef CONFIG_OPTIMIZE_DDR
-# define H4_2422_SDRC_ACTIM_CTRLA_0 0x9BEAD909
-# define H4_2422_SDRC_ACTIM_CTRLB_0 0x00000020
-# define H4_2422_SDRC_RFR_CTRL_ES1 0x00002401
-# define H4_2422_SDRC_RFR_CTRL 0x0002da01
-#endif
#define H4_2422_SDRC_MR_0_DDR 0x00000032
-#define H4_2422_SDRC_DLLA_CTRL 0x00007307
-#define H4_2422_SDRC_DLLB_CTRL 0x00007307
-/* optimized timings */
+/* ES1 work around timings */
+#define H4_242x_SDRC_ACTIM_CTRLA_0_ES1 0x9bead909 /* 165Mhz for use with 100/133 */
+#define H4_242x_SDRC_ACTIM_CTRLB_0_ES1 0x00000020
+#define H4_242x_SDRC_RFR_CTRL_ES1 0x00002401 /* use over refresh for ES1 */
+
+/* optimized timings good for current shipping parts */
#define H4_242X_SDRC_ACTIM_CTRLA_0_100MHz 0x5A59B485
#define H4_242X_SDRC_ACTIM_CTRLB_0_100MHz 0x0000000e
-#define H4_242X_SDRC_ACTIM_CTRLA_0_133MHz 0x8BA6E6C8 /* temp warn 0 settigs */
-#define H4_242X_SDRC_ACTIM_CTRLB_0_133MHz 0x00000010 /* temp warn 0 settings */
-#define H4_242X_SDRC_RFR_CTRL_100MHz 0x0002da01 /* this is not optimal yet */
-#define H4_242X_SDRC_RFR_CTRL_133MHz 0x0003de01
+#define H4_242X_SDRC_ACTIM_CTRLA_0_133MHz 0x8BA6E6C8 /* temp warn 0 settings */
+#define H4_242X_SDRC_ACTIM_CTRLB_0_133MHz 0x00000010 /* temp warn 0 settings */
+#define H4_242X_SDRC_RFR_CTRL_100MHz 0x0002da01
+#define H4_242X_SDRC_RFR_CTRL_133MHz 0x0003de01
+#define H4_242x_SDRC_DLLAB_CTRL_100MHz 0x0000980E /* 72deg, allow DPLLout*1 to work (combo)*/
+#define H4_242x_SDRC_DLLAB_CTRL_133MHz 0x0000690E /* 72deg, for ES2 */
-#ifdef CONFIG_OPTIMIZE_DDR
-# ifdef PRCM_CONFIG_II
-# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
-# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
-# define H4_2420_SDRC_RFR_CTRL_ES1 H4_242X_SDRC_RFR_CTRL_100MHz
-# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz
-# elif PRCM_CONFIG_III
-# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_133MHz
-# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_133MHz
-# define H4_2420_SDRC_RFR_CTRL_ES1 H4_242X_SDRC_RFR_CTRL_133MHz
-# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_133MHz
-# endif
-# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_2420_SDRC_ACTIM_CTRLA_0
-# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_2420_SDRC_ACTIM_CTRLB_0
-# define H4_2422_SDRC_RFR_CTRL_ES1 H4_2420_SDRC_RFR_CTRL_ES1
-# define H4_2422_SDRC_RFR_CTRL H4_2420_SDRC_RFR_CTRL
+#ifdef PRCM_CONFIG_II
+# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
+# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
+# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz
+# define H4_2420_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz
+# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
+# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
+# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz
+# define H4_2422_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz
+#elif PRCM_CONFIG_III
+# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_133MHz
+# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_133MHz
+# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_133MHz
+# define H4_2420_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_133MHz
+# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
+# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
+# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz
+# define H4_2422_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz
#endif
/* GPMC settings */
-#ifdef PRCM_CONFIG_II /* L3 at 100MHz */
-#ifdef CFG_NAND_BOOT
-#define H4_24XX_GPMC_CONFIG1_0 0x0
-#define H4_24XX_GPMC_CONFIG2_0 0x00141400
-#define H4_24XX_GPMC_CONFIG3_0 0x00141400
-#define H4_24XX_GPMC_CONFIG4_0 0x0F010F01
-#define H4_24XX_GPMC_CONFIG5_0 0x010C1414
-#define H4_24XX_GPMC_CONFIG6_0 0x00000A80
-#else
-#define H4_24XX_GPMC_CONFIG1_0 0x3
-#define H4_24XX_GPMC_CONFIG2_0 0x000f0f01
-#define H4_24XX_GPMC_CONFIG3_0 0x00050502
-#define H4_24XX_GPMC_CONFIG4_0 0x0C060C06
-#define H4_24XX_GPMC_CONFIG5_0 0x01131F1F
-#endif
-#define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24))
+#ifdef PRCM_CONFIG_II /* L3 at 100MHz */
+# ifdef CFG_NAND_BOOT
+# define H4_24XX_GPMC_CONFIG1_0 0x0
+# define H4_24XX_GPMC_CONFIG2_0 0x00141400
+# define H4_24XX_GPMC_CONFIG3_0 0x00141400
+# define H4_24XX_GPMC_CONFIG4_0 0x0F010F01
+# define H4_24XX_GPMC_CONFIG5_0 0x010C1414
+# define H4_24XX_GPMC_CONFIG6_0 0x00000A80
+# else /* else NOR */
+# define H4_24XX_GPMC_CONFIG1_0 0x3
+# define H4_24XX_GPMC_CONFIG2_0 0x000f0f01
+# define H4_24XX_GPMC_CONFIG3_0 0x00050502
+# define H4_24XX_GPMC_CONFIG4_0 0x0C060C06
+# define H4_24XX_GPMC_CONFIG5_0 0x01131F1F
+# endif /* endif CFG_NAND_BOOT */
+# define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24))
+# define H4_24XX_GPMC_CONFIG1_1 0x00011000
+# define H4_24XX_GPMC_CONFIG2_1 0x001F1F00
+# define H4_24XX_GPMC_CONFIG3_1 0x00080802
+# define H4_24XX_GPMC_CONFIG4_1 0x1C091C09
+# define H4_24XX_GPMC_CONFIG5_1 0x031A1F1F
+# define H4_24XX_GPMC_CONFIG6_1 0x000003C2
+# define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24))
+#endif /* endif PRCM_CONFIG_II */
-#define H4_24XX_GPMC_CONFIG1_1 0x00011000
-#define H4_24XX_GPMC_CONFIG2_1 0x001F1F00
-#define H4_24XX_GPMC_CONFIG3_1 0x00080802
-#define H4_24XX_GPMC_CONFIG4_1 0x1C091C09
-#define H4_24XX_GPMC_CONFIG5_1 0x031A1F1F
-#define H4_24XX_GPMC_CONFIG6_1 0x000003C2
-#define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24))
-#endif
+#ifdef PRCM_CONFIG_III /* L3 at 133MHz */
+# ifdef CFG_NAND_BOOT
+# define H4_24XX_GPMC_CONFIG1_0 0x0
+# define H4_24XX_GPMC_CONFIG2_0 0x00141400
+# define H4_24XX_GPMC_CONFIG3_0 0x00141400
+# define H4_24XX_GPMC_CONFIG4_0 0x0F010F01
+# define H4_24XX_GPMC_CONFIG5_0 0x010C1414
+# define H4_24XX_GPMC_CONFIG6_0 0x00000A80
+# else /* NOR boot */
+# define H4_24XX_GPMC_CONFIG1_0 0x3
+# define H4_24XX_GPMC_CONFIG2_0 0x00151501
+# define H4_24XX_GPMC_CONFIG3_0 0x00060602
+# define H4_24XX_GPMC_CONFIG4_0 0x10081008
+# define H4_24XX_GPMC_CONFIG5_0 0x01131F1F
+# define H4_24XX_GPMC_CONFIG6_0 0x000004c4
+# endif /* endif CFG_NAND_BOOT */
+# define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24))
+# define H4_24XX_GPMC_CONFIG1_1 0x00011000
+# define H4_24XX_GPMC_CONFIG2_1 0x001f1f01
+# define H4_24XX_GPMC_CONFIG3_1 0x00080803
+# define H4_24XX_GPMC_CONFIG4_1 0x1C091C09
+# define H4_24XX_GPMC_CONFIG5_1 0x041f1F1F
+# define H4_24XX_GPMC_CONFIG6_1 0x000004C4
+# define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24))
+#endif /* endif CFG_PRCM_III */
-#ifdef PRCM_CONFIG_III /* L3 at 133MHz */
-#ifdef CFG_NAND_BOOT
-#define H4_24XX_GPMC_CONFIG1_0 0x0
-#define H4_24XX_GPMC_CONFIG2_0 0x00141400
-#define H4_24XX_GPMC_CONFIG3_0 0x00141400
-#define H4_24XX_GPMC_CONFIG4_0 0x0F010F01
-#define H4_24XX_GPMC_CONFIG5_0 0x010C1414
-#define H4_24XX_GPMC_CONFIG6_0 0x00000A80
-#else
-#define H4_24XX_GPMC_CONFIG1_0 0x3
-#define H4_24XX_GPMC_CONFIG2_0 0x00151501
-#define H4_24XX_GPMC_CONFIG3_0 0x00060602
-#define H4_24XX_GPMC_CONFIG4_0 0x10081008
-#define H4_24XX_GPMC_CONFIG5_0 0x01131F1F
-#define H4_24XX_GPMC_CONFIG6_0 0x000004c4
-#endif
-#define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24))
-
-#define H4_24XX_GPMC_CONFIG1_1 0x00011000
-#define H4_24XX_GPMC_CONFIG2_1 0x001f1f01
-#define H4_24XX_GPMC_CONFIG3_1 0x00080803
-#define H4_24XX_GPMC_CONFIG4_1 0x1C091C09
-#define H4_24XX_GPMC_CONFIG5_1 0x041f1F1F
-#define H4_24XX_GPMC_CONFIG6_1 0x000004C4
-#define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24))
-#endif
-
-#ifdef CONFIG_APTIX /* SDRC-SDR for Aptix x16 */
-#define VAL_H4_SDRC_SHARING_16 0x00002400 /* No-Tristate, 16bit on D31-D16, CS1=dont care */
-#define VAL_H4_SDRC_SHARING 0x00000100
-#define VAL_H4_SDRC_MCFG_0_16 0x00901000 /* SDR-SDRAM,External,x16 bit */
-#define VAL_H4_SDRC_MCFG_0 0x01702011
-#define VAL_H4_SDRC_MR_0 0x00000029 /* Burst=2, Serial Mode, CAS 3*/
-#define VAL_H4_SDRC_RFR_CTRL_0 0x00001703 /* refresh time */
-#define VAL_H4_SDRC_DCDL2_CTRL 0x5A59B485
-#endif
-
-#endif
+#endif /* endif _OMAP24XX_MEM_H_ */
diff --git a/include/asm-arm/arch-arm1136/omap2420.h b/include/asm-arm/arch-arm1136/omap2420.h
index eba385c..7a7aae6 100644
--- a/include/asm-arm/arch-arm1136/omap2420.h
+++ b/include/asm-arm/arch-arm1136/omap2420.h
@@ -37,13 +37,25 @@
#define A_WRITEPERM0 0x68005058
#define GP_DEVICE (BIT8|BIT9)
+/* L3 Firewall */
+#define A_REQINFOPERM0 0x68005048
+#define A_READPERM0 0x68005050
+#define A_WRITEPERM0 0x68005058
+
/* CONTROL */
#define OMAP2420_CTRL_BASE (0x48000000)
#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8)
+/* device type */
+#define TST_DEVICE 0x0
+#define EMU_DEVICE 0x1
+#define HS_DEVICE 0x2
+#define GP_DEVICE 0x3
+
/* TAP information */
#define OMAP2420_TAP_BASE (0x48014000)
#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204)
+#define PRODUCTION_ID (OMAP2420_TAP_BASE+0x208)
/* GPMC */
#define OMAP2420_GPMC_BASE (0x6800A000)
@@ -76,6 +88,7 @@
#define OMAP2420_SDRC_BASE 0x68009000
#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10)
#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14)
+#define SDRC_CS_CFG (OMAP2420_SDRC_BASE+0x40)
#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44)
#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60)
#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68)
diff --git a/include/asm-arm/arch-arm1136/rev.h b/include/asm-arm/arch-arm1136/rev.h
deleted file mode 100644
index 6fceb09..0000000
--- a/include/asm-arm/arch-arm1136/rev.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP24XX_REV_H_
-#define _OMAP24XX_REV_H_
-
-typedef struct h4_system_data {
- /* base board info */
- u32 base_b_rev; /* rev from base board i2c */
- /* cpu board info */
- u32 cpu_b_rev; /* rev from cpu board i2c */
- u32 cpu_b_mux; /* mux type on daughter board */
- u32 cpu_b_ddr_type; /* mem type */
- u32 cpu_b_ddr_speed; /* ddr speed rating */
- u32 cpu_b_switches; /* boot ctrl switch settings */
- /* cpu info */
- u32 cpu_type; /* type of cpu; 2420, 2422, 2430,...*/
- u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/
-} h4_sys_data;
-
-#define CDB_DDR_COMBO /* combo part on cpu daughter card */
-#define CDB_DDR_IPDB /* 2x16 parts on daughter card */
-
-#define DDR_100 100 /* type found on most mem d-boards */
-#define DDR_111 111 /* some combo parts */
-#define DDR_133 133 /* most combo, some mem d-boards */
-#define DDR_165 165 /* future parts */
-
-#define CPU_2420 0x2420
-#define CPU_2422 0x2422
-
-#define CPU_2422_ES1 1
-#define CPU_2422_ES2 2
-#define CPU_2420_ES1 1
-#define CPU_2420_ES2 2
-
-#endif
diff --git a/include/asm-arm/arch-arm1136/sys_info.h b/include/asm-arm/arch-arm1136/sys_info.h
index ef301ba..53c231a 100644
--- a/include/asm-arm/arch-arm1136/sys_info.h
+++ b/include/asm-arm/arch-arm1136/sys_info.h
@@ -39,7 +39,8 @@
u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/
} h4_sys_data;
-#define SDR_DISCRETE 4
+#define XDR_POP 5 /* package on package part */
+#define SDR_DISCRETE 4 /* 128M memory SDR module*/
#define DDR_STACKED 3 /* stacked part on 2422 */
#define DDR_COMBO 2 /* combo part on cpu daughter card (menalaeus) */
#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */
@@ -50,16 +51,19 @@
#define DDR_165 165 /* future parts */
#define CPU_2420 0x2420
-#define CPU_2422 0x2422
+#define CPU_2422 0x2422 /* 2420 + 64M stacked */
+#define CPU_2423 0x2423 /* 2420 + 96M stacked */
#define CPU_2422_ES1 1
#define CPU_2422_ES2 2
#define CPU_2420_ES1 1
#define CPU_2420_ES2 2
+#define CPU_2420_2422_ES1 1
#define CPU_2420_CHIPID 0x0B5D9000
#define CPU_24XX_ID_MASK 0x0FFFF000
#define CPU_242X_REV_MASK 0xF0000000
+#define CPU_242X_PID_MASK 0x000F0000
#define BOARD_H4_MENELAUS 1
#define BOARD_H4_SDP 2
diff --git a/include/asm-arm/arch-arm1136/sys_proto.h b/include/asm-arm/arch-arm1136/sys_proto.h
index 2cd8455..9d8e5b2 100644
--- a/include/asm-arm/arch-arm1136/sys_proto.h
+++ b/include/asm-arm/arch-arm1136/sys_proto.h
@@ -44,10 +44,11 @@
u32 get_board_type(void);
void display_board_info(u32);
void update_mux(u32,u32);
+u32 get_sdr_cs_size(u32 offset);
u32 running_in_sdram(void);
u32 running_in_sram(void);
u32 running_in_flash(void);
u32 running_from_internal_boot(void);
-
+u32 get_device_type(void);
#endif
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index c791603..5674e20 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -39,11 +39,8 @@
/*#define CONFIG_VIRTIO 1 #* Using Virtio simulator */
/* Clock config to target*/
-#define PRCM_CONFIG_II 1
-/*#define PRCM_CONFIG_III 1 */
-
-/* Memory configuration on board */
-/*#define CONFIG_OPTIMIZE_DDR 1 */
+#define PRCM_CONFIG_II 1
+//#define PRCM_CONFIG_III 1
#include <asm/arch/omap2420.h> /* get chip and board defs */
@@ -125,11 +122,8 @@
#ifdef CFG_NAND_BOOT
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_NAND | CFG_CMD_JFFS2)
#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_JFFS2)
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_JFFS2) & ~CFG_CMD_AUTOSCRIPT)
#endif
-/* I'd like to get to these. Snap kernel loads if we make MMC go */
- /* #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_NAND | CFG_CMD_JFFS2 | CFG_CMD_DHCP | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_I2C) */
-
#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -241,17 +235,21 @@
#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */
#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1
+#define PHYS_FLASH_SECT_SIZE SZ_128K
#define PHYS_FLASH_1 H4_CS0_BASE /* Flash Bank #1 */
#define PHYS_FLASH_SIZE_1 SZ_32M
#define PHYS_FLASH_2 (H4_CS0_BASE+SZ_32M) /* same cs, 2 chips in series */
#define PHYS_FLASH_SIZE_2 SZ_32M
-#define CFG_FLASH_BASE PHYS_FLASH_1
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
+#define CFG_FLASH_BASE PHYS_FLASH_1
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
+#define CFG_MONITOR_LEN SZ_128K /* Reserve 1 sector */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + PHYS_FLASH_SIZE_1 }
#ifdef CFG_NAND_BOOT
#define CFG_ENV_IS_IN_NAND 1
@@ -259,11 +257,24 @@
#else
#define CFG_ENV_ADDR (CFG_FLASH_BASE + SZ_128K)
#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE
+#define CFG_ENV_OFFSET ( CFG_MONITOR_BASE + CFG_MONITOR_LEN ) /* Environment after Monitor */
#endif
+
+
+
+/*-----------------------------------------------------------------------
+ * CFI FLASH driver setup
+ */
+#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
+#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */
+
/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (30*75*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (30*75*CFG_HZ) /* Timeout for Flash Write */
+#define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */
#define CFG_JFFS2_MEM_NAND