block: Move ceva driver to DM
This patch also includes ARM64 zynqmp changes:
- Remove platform non DM initialization
- Remove hardcoded sata base address
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/include/asm/arch-zynqmp/hardware.h b/arch/arm/include/asm/arch-zynqmp/hardware.h
index 5908c50..041b43c 100644
--- a/arch/arm/include/asm/arch-zynqmp/hardware.h
+++ b/arch/arm/include/asm/arch-zynqmp/hardware.h
@@ -18,8 +18,6 @@
#define ARASAN_NAND_BASEADDR 0xFF100000
-#define ZYNQMP_SATA_BASEADDR 0xFD0C0000
-
#define ZYNQMP_USB0_XHCI_BASEADDR 0xFE200000
#define ZYNQMP_USB1_XHCI_BASEADDR 0xFE300000
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index cef1f6a..a23c38a 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -311,17 +311,6 @@
{
}
-#ifdef CONFIG_SCSI_AHCI_PLAT
-void scsi_init(void)
-{
-#if defined(CONFIG_SATA_CEVA)
- init_sata(0);
-#endif
- ahci_init((void __iomem *)ZYNQMP_SATA_BASEADDR);
- scsi_scan(1);
-}
-#endif
-
int board_late_init(void)
{
u32 reg = 0;
diff --git a/configs/xilinx_zynqmp_ep_defconfig b/configs/xilinx_zynqmp_ep_defconfig
index f261e22..b223e11 100644
--- a/configs/xilinx_zynqmp_ep_defconfig
+++ b/configs/xilinx_zynqmp_ep_defconfig
@@ -42,6 +42,8 @@
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_DM_SCSI=y
+CONFIG_SATA_CEVA=y
CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_ZYNQMPPL=y
diff --git a/configs/xilinx_zynqmp_zcu102_defconfig b/configs/xilinx_zynqmp_zcu102_defconfig
index 021e0ff..9f2df49 100644
--- a/configs/xilinx_zynqmp_zcu102_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_defconfig
@@ -34,6 +34,8 @@
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_DM_SCSI=y
+CONFIG_SATA_CEVA=y
CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_ZYNQMPPL=y
diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig
index 34062bd..b2b1720 100644
--- a/configs/xilinx_zynqmp_zcu102_revB_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig
@@ -34,6 +34,8 @@
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_DM_SCSI=y
+CONFIG_SATA_CEVA=y
CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_ZYNQMPPL=y
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 7b82ba6..88e66e2 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -39,4 +39,13 @@
menu "SATA/SCSI device support"
+config SATA_CEVA
+ bool "Ceva Sata controller"
+ depends on AHCI
+ depends on DM_SCSI
+ help
+ This option enables Ceva Sata controller hard IP available on Xilinx
+ ZynqMP. Support up to 2 external devices. Complient with SATA 3.1 and
+ AHCI 1.3 specifications with hot-plug detect feature.
+
endmenu
diff --git a/drivers/block/sata_ceva.c b/drivers/block/sata_ceva.c
index dcc3b90..9b54664 100644
--- a/drivers/block/sata_ceva.c
+++ b/drivers/block/sata_ceva.c
@@ -5,6 +5,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <dm.h>
#include <netdev.h>
#include <ahci.h>
#include <scsi.h>
@@ -73,10 +74,9 @@
#define DRV_NAME "ahci-ceva"
#define CEVA_FLAG_BROKEN_GEN2 1
-int init_sata(int dev)
+static int ceva_init_sata(ulong mmio)
{
ulong tmp;
- ulong mmio = ZYNQMP_SATA_BASEADDR;
int i;
/*
@@ -111,3 +111,40 @@
}
return 0;
}
+
+static int sata_ceva_probe(struct udevice *dev)
+{
+ struct scsi_platdata *plat = dev_get_platdata(dev);
+
+ ceva_init_sata(plat->base);
+ return 0;
+}
+
+static const struct udevice_id sata_ceva_ids[] = {
+ { .compatible = "ceva,ahci-1v84" },
+ { }
+};
+
+static int sata_ceva_ofdata_to_platdata(struct udevice *dev)
+{
+ struct scsi_platdata *plat = dev_get_platdata(dev);
+
+ plat->base = dev_get_addr(dev);
+ if (plat->base == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ /* Hardcode number for ceva sata controller */
+ plat->max_lun = 1; /* Actually two but untested */
+ plat->max_id = 2;
+
+ return 0;
+}
+
+U_BOOT_DRIVER(ceva_host_blk) = {
+ .name = "ceva_sata",
+ .id = UCLASS_SCSI,
+ .of_match = sata_ceva_ids,
+ .probe = sata_ceva_probe,
+ .ofdata_to_platdata = sata_ceva_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct scsi_platdata),
+};
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index d480990..fb4f6d6 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -181,7 +181,6 @@
#ifdef CONFIG_SATA_CEVA
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
-#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
#define CONFIG_SYS_SCSI_MAX_LUN 1
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h
index d0ce768..3a572b7 100644
--- a/include/configs/xilinx_zynqmp_ep.h
+++ b/include/configs/xilinx_zynqmp_ep.h
@@ -16,7 +16,6 @@
#define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000
#define CONFIG_ZYNQ_SDHCI_MIN_FREQ (CONFIG_ZYNQ_SDHCI_MAX_FREQ >> 9)
#define CONFIG_ZYNQ_EEPROM
-#define CONFIG_SATA_CEVA
#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \
ZYNQMP_USB1_XHCI_BASEADDR}
diff --git a/include/configs/xilinx_zynqmp_zcu102.h b/include/configs/xilinx_zynqmp_zcu102.h
index adf2321..8d018da 100644
--- a/include/configs/xilinx_zynqmp_zcu102.h
+++ b/include/configs/xilinx_zynqmp_zcu102.h
@@ -41,8 +41,6 @@
#define CONFIG_CMD_PCA953X
#define CONFIG_CMD_PCA953X_INFO
-#define CONFIG_SATA_CEVA
-
#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR}
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1