Use __stringify() instead of xstr()
Some boards still use xstr(). Replace remaining occurrences
of xstr() by commonly used __stringify().
Signed-off-by: Anatolij Gustschin <agust@denx.de>
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index adaf44f..b775ebd 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -172,9 +172,6 @@
#define CONFIG_BOOTFILE "uImage"
-#define xstr(s) str(s)
-#define str(s) #s
-
/* Setup MTD for NAND on the SOM */
#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(MLO)," \
@@ -201,13 +198,13 @@
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"baudrate=115200\0" \
"consoledev=ttyO2\0" \
- "hostname=" xstr(CONFIG_HOSTNAME) "\0" \
+ "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
"loadaddr=0x82000000\0" \
"load=tftp ${loadaddr} ${u-boot}\0" \
"load_k=tftp ${loadaddr} ${bootfile}\0" \
"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
"loadmlo=tftp ${loadaddr} ${mlo}\0" \
- "mlo=" xstr(CONFIG_HOSTNAME) "/MLO\0" \
+ "mlo=" __stringify(CONFIG_HOSTNAME) "/MLO\0" \
"mmcargs=root=/dev/mmcblk0p2 rw " \
"rootfstype=ext3 rootwait\0" \
"mmcboot=echo Booting from mmc ...; " \
@@ -221,7 +218,7 @@
"bootm ${loadaddr}\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
- "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.img\0" \
+ "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.img\0" \
"uboot_addr=0x80000\0" \
"update=nandecc sw;nand erase ${uboot_addr} 100000;" \
"nand write ${loadaddr} ${uboot_addr} 80000\0" \
diff --git a/include/configs/o2d.h b/include/configs/o2d.h
index eff1bce..b2905b2 100644
--- a/include/configs/o2d.h
+++ b/include/configs/o2d.h
@@ -43,8 +43,8 @@
#define CONFIG_BOARD_NAME "o2d"
#define CONFIG_BOARD_BOOTCMD "run dhcp_boot"
-#define CONFIG_BOARD_MEM_LIMIT xstr(126)
-#define BOARD_POST_CRC32_END xstr(0x01000000)
+#define CONFIG_BOARD_MEM_LIMIT __stringify(126)
+#define BOARD_POST_CRC32_END __stringify(0x01000000)
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_IFM_DEFAULT_ENV_SETTINGS \
@@ -56,7 +56,7 @@
"ramtop=fc55ffff\0" \
"jffbot=fc560000\0" \
"jfftop=fcffffff\0" \
- "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \
+ "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
"ubotop=fc03ffff\0" \
"kernel_addr=0xfc060000\0" \
"ramdisk_addr=0xfc160000\0" \
diff --git a/include/configs/o2d300.h b/include/configs/o2d300.h
index 1af5383..a8222d9 100644
--- a/include/configs/o2d300.h
+++ b/include/configs/o2d300.h
@@ -44,8 +44,8 @@
#define CONFIG_BOARD_NAME "o2d300"
#define CONFIG_BOARD_BOOTCMD "run dhcp_boot"
-#define CONFIG_BOARD_MEM_LIMIT xstr(126)
-#define BOARD_POST_CRC32_END xstr(0x02000000)
+#define CONFIG_BOARD_MEM_LIMIT __stringify(126)
+#define BOARD_POST_CRC32_END __stringify(0x02000000)
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_IFM_DEFAULT_ENV_SETTINGS \
@@ -63,7 +63,7 @@
"ramtop=fc57ffff\0" \
"jffbot=fc580000\0" \
"jfftop=fd39ffff\0" \
- "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \
+ "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
"ubotop=fc03ffff\0" \
"halname="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME"_halcon\0" \
"halbot=fd3a0000\0" \
diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h
index 133dc6f..183c449 100644
--- a/include/configs/o2dnt-common.h
+++ b/include/configs/o2dnt-common.h
@@ -114,9 +114,6 @@
#undef CONFIG_BOOTARGS
-#define xstr(s) str(s)
-#define str(s) #s
-
#if !defined(CONFIG_CONSOLE_DEV)
#define CONFIG_CONSOLE_DEV "ttyPSC1"
#endif
@@ -158,7 +155,7 @@
"kernel_addr_r=600000\0" \
"initrd_high=0x03e00000\0" \
"memlimit=mem="CONFIG_BOARD_MEM_LIMIT"M\0" \
- "memtest=mtest 0x00100000 "xstr(CONFIG_SYS_MEMTEST_END)" 0 1\0" \
+ "memtest=mtest 0x00100000 "__stringify(CONFIG_SYS_MEMTEST_END)" 0 1\0" \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
@@ -182,7 +179,7 @@
"unlock=yes\0" \
"post=echo !!! "CONFIG_BOARD_NAME" POWER ON SELF TEST !!!;" \
"setenv bootdelay 1;" \
- "crc32 "xstr(CONFIG_SYS_TEXT_BASE)" " \
+ "crc32 "__stringify(CONFIG_SYS_TEXT_BASE)" " \
BOARD_POST_CRC32_END";" \
"setenv bootcmd "CONFIG_BOARD_BOOTCMD";saveenv;reset\0"
diff --git a/include/configs/o2dnt2.h b/include/configs/o2dnt2.h
index 3636c0e..1b765a7 100644
--- a/include/configs/o2dnt2.h
+++ b/include/configs/o2dnt2.h
@@ -43,8 +43,8 @@
#define CONFIG_BOARD_NAME "o2dnt2"
#define CONFIG_BOARD_BOOTCMD "run flash_self"
-#define CONFIG_BOARD_MEM_LIMIT xstr(126)
-#define BOARD_POST_CRC32_END xstr(0x01000000)
+#define CONFIG_BOARD_MEM_LIMIT __stringify(126)
+#define BOARD_POST_CRC32_END __stringify(0x01000000)
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_IFM_DEFAULT_ENV_SETTINGS \
@@ -56,7 +56,7 @@
"ramtop=fc55ffff\0" \
"jffbot=fc560000\0" \
"jfftop=fce5ffff\0" \
- "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \
+ "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
"ubotop=fc03ffff\0" \
"calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0" \
"calbot=fce60000\0" \
diff --git a/include/configs/o2i.h b/include/configs/o2i.h
index 8fe1da5..c0fceda 100644
--- a/include/configs/o2i.h
+++ b/include/configs/o2i.h
@@ -37,8 +37,8 @@
#define CONFIG_BOARD_NAME "o2i"
#define CONFIG_BOARD_BOOTCMD "run dhcp_boot"
-#define CONFIG_BOARD_MEM_LIMIT xstr(62)
-#define BOARD_POST_CRC32_END xstr(0x01000000)
+#define CONFIG_BOARD_MEM_LIMIT __stringify(62)
+#define BOARD_POST_CRC32_END __stringify(0x01000000)
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_IFM_DEFAULT_ENV_SETTINGS \
@@ -52,7 +52,7 @@
"jfftop=ffebffff\0" \
"kernel_addr=0xff060000\0" \
"ramdisk_addr=0xff160000\0" \
- "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \
+ "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
"ubotop=ff03ffff\0" \
"autoload=no\0" \
"dhcp_boot=run dhcpcmd; run flash_mtd\0" \
diff --git a/include/configs/o2mnt.h b/include/configs/o2mnt.h
index c2164b5..eb63cb0 100644
--- a/include/configs/o2mnt.h
+++ b/include/configs/o2mnt.h
@@ -39,8 +39,8 @@
#define CONFIG_BOARD_NAME "o2mnt"
#define CONFIG_BOARD_BOOTCMD "${newcmd}"
-#define CONFIG_BOARD_MEM_LIMIT xstr(62)
-#define BOARD_POST_CRC32_END xstr(0x01000000)
+#define CONFIG_BOARD_MEM_LIMIT __stringify(62)
+#define BOARD_POST_CRC32_END __stringify(0x01000000)
#ifndef CONFIG_IFM_SENSOR_TYPE
#define CONFIG_IFM_SENSOR_TYPE "O2M110"
@@ -56,7 +56,7 @@
"ramtop=ffc5ffff\0" \
"jffbot=ffc60000\0" \
"jfftop=ffffffff\0" \
- "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \
+ "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
"ubotop=ff03ffff\0" \
"kernel_addr=0xff060000\0" \
"ramdisk_addr=0xff260000\0" \
diff --git a/include/configs/o3dnt.h b/include/configs/o3dnt.h
index 05cd360..7790750 100644
--- a/include/configs/o3dnt.h
+++ b/include/configs/o3dnt.h
@@ -44,8 +44,8 @@
#define CONFIG_BOARD_NAME "o3dnt"
#define CONFIG_BOARD_BOOTCMD "run flash_self"
-#define CONFIG_BOARD_MEM_LIMIT xstr(62)
-#define BOARD_POST_CRC32_END xstr(0x01000000)
+#define CONFIG_BOARD_MEM_LIMIT __stringify(62)
+#define BOARD_POST_CRC32_END __stringify(0x01000000)
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_IFM_DEFAULT_ENV_SETTINGS \
@@ -57,7 +57,7 @@
"ramtop=fc55ffff\0" \
"jffbot=fc560000\0" \
"jfftop=fce5ffff\0" \
- "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \
+ "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
"ubotop=fc03ffff\0" \
"calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0" \
"calbot=fce60000\0" \
diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index 259205e..d3d3e69 100644
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -242,8 +242,6 @@
* Default environment and default scripts
* to update uboot and load kernel
*/
-#define xstr(s) str(s)
-#define str(s) #s
#define CONFIG_HOSTNAME woodburn
#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -263,9 +261,9 @@
"addmisc=setenv bootargs ${bootargs} ${misc}\0" \
"loadaddr=80800000\0" \
"kernel_addr_r=80800000\0" \
- "hostname=" xstr(CONFIG_HOSTNAME) "\0" \
- "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
- "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \
+ "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
+ "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
+ "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
"flash_self=run ramargs addip addtty addmtd addmisc;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
@@ -279,9 +277,9 @@
"run ramargs addip addtty addmtd addmisc;" \
"bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
"else echo Images not loades;fi\0" \
- "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
+ "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
"load=tftp ${loadaddr} ${u-boot}\0" \
- "uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0" \
+ "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
"update=protect off ${uboot_addr} +80000;" \
"erase ${uboot_addr} +80000;" \
"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
diff --git a/include/configs/x600.h b/include/configs/x600.h
index 71373e9..6214dc4 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -181,26 +181,24 @@
#define CONFIG_UBI_PART ubi0
#define CONFIG_UBIFS_VOLUME rootfs
-#define xstr(s) str(s)
-#define str(s) #s
-
#define MTDIDS_DEFAULT "nand0=nand"
#define MTDPARTS_DEFAULT "mtdparts=nand:64M(ubi0),64M(ubi1)"
#define CONFIG_EXTRA_ENV_SETTINGS \
"u-boot_addr=1000000\0" \
- "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.spr\0" \
+ "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.spr\0" \
"load=tftp ${u-boot_addr} ${u-boot}\0" \
- "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " +${filesize};"\
- "erase " xstr(CONFIG_SYS_MONITOR_BASE) " +${filesize};" \
- "cp.b ${u-boot_addr} " xstr(CONFIG_SYS_MONITOR_BASE) \
+ "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \
+ " +${filesize};" \
+ "erase " __stringify(CONFIG_SYS_MONITOR_BASE) " +${filesize};" \
+ "cp.b ${u-boot_addr} " __stringify(CONFIG_SYS_MONITOR_BASE) \
" ${filesize};" \
- "protect on " xstr(CONFIG_SYS_MONITOR_BASE) \
+ "protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \
" +${filesize}\0" \
"upd=run load update\0" \
- "ubifs=" xstr(CONFIG_HOSTNAME) "/ubifs.img\0" \
- "part=" xstr(CONFIG_UBI_PART) "\0" \
- "vol=" xstr(CONFIG_UBIFS_VOLUME) "\0" \
+ "ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0" \
+ "part=" __stringify(CONFIG_UBI_PART) "\0" \
+ "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0" \
"load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \
"update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
" ${filesize}\0" \
@@ -223,11 +221,12 @@
"saveenv;boot\0" \
"ubifsargs=set bootargs ubi.mtd=ubi${boot_part} " \
"root=ubi0:rootfs rootfstype=ubifs\0" \
- "kernel=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
+ "kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
"kernel_fs=/boot/uImage \0" \
"kernel_addr=1000000\0" \
- "dtb=" xstr(CONFIG_HOSTNAME) "/" xstr(CONFIG_HOSTNAME) ".dtb\0" \
- "dtb_fs=/boot/" xstr(CONFIG_HOSTNAME) ".dtb\0" \
+ "dtb=" __stringify(CONFIG_HOSTNAME) "/" \
+ __stringify(CONFIG_HOSTNAME) ".dtb\0" \
+ "dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0" \
"dtb_addr=1800000\0" \
"load_kernel=tftp ${kernel_addr} ${kernel}\0" \
"load_dtb=tftp ${dtb_addr} ${dtb}\0" \