sunxi: introduce NCAT2 generation model
Allwinner seems to typically stick to a common MMIO memory map for
several SoCs, but from time to time does some breaking changes, which
also introduce new generations of some peripherals. The last time this
happened with the H6, which apart from re-organising the base addresses
also changed the clock controller significantly. We added a
CONFIG_SUN50I_GEN_H6 symbol back then to mark SoCs sharing those traits.
Now the Allwinner D1 changes the memory map again, and also extends the
pincontroller, among other peripherals.
To mark this generation of SoCs, add a CONFIG_SUNXI_GEN_NCAT2 symbol,
this name is reportedly used in the Allwinner BSP code, and prevents us
from inventing our own name.
Add this new symbol to some guards that were already checking for the H6
generation, since many features are shared between the two (like the
renovated clock controller).
This paves the way to introduce a first user of this generation.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Samuel Holland <samuel@sholland.org>
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index d3ed62a..6ba9ed2 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -121,7 +121,7 @@
config SUNXI_SRAM_ADDRESS
hex
default 0x10000 if MACH_SUN9I || MACH_SUN50I || MACH_SUN50I_H5
- default 0x20000 if SUN50I_GEN_H6
+ default 0x20000 if SUN50I_GEN_H6 || SUNXI_GEN_NCAT2
default 0x0
---help---
Older Allwinner SoCs have their mask boot ROM mapped just below 4GB,
@@ -183,6 +183,14 @@
Select this for sunxi SoCs which have H6 like peripherals, clocks
and memory map.
+config SUNXI_GEN_NCAT2
+ bool
+ select MMC_SUNXI_HAS_NEW_MODE
+ select SUPPORT_SPL
+ ---help---
+ Select this for sunxi SoCs which have D1 like peripherals, clocks
+ and memory map.
+
config SUNXI_DRAM_DW
bool
---help---
@@ -804,6 +812,7 @@
depends on !MACH_SUN9I
depends on !MACH_SUN50I
depends on !SUN50I_GEN_H6
+ depends on !SUNXI_GEN_NCAT2
select VIDEO
select DISPLAY
imply VIDEO_DT_SIMPLEFB
@@ -1017,6 +1026,7 @@
default 0x2fe00000 if MACH_SUN9I
default 0x4fe00000 if MACH_SUN50I
default 0x4fe00000 if SUN50I_GEN_H6
+ default 0x4fe00000 if SUNXI_GEN_NCAT2
config SPL_SPI_SUNXI
bool "Support for SPI Flash on Allwinner SoCs in SPL"
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 671211e..1d4c70e 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -25,6 +25,7 @@
endif
obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o
obj-$(CONFIG_SUN50I_GEN_H6) += clock_sun50i_h6.o
+obj-$(CONFIG_SUNXI_GEN_NCAT2) += clock_sun50i_h6.o
ifndef CONFIG_ARM64
obj-y += timer.o
endif
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index 4a1a0ea..d572314 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -176,13 +176,19 @@
#error Unsupported console port number. Please fix pin mux settings in board.c
#endif
-#ifdef CONFIG_SUN50I_GEN_H6
- /* Update PIO power bias configuration by copy hardware detected value */
- val = readl(SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_VAL);
- writel(val, SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_SEL);
- val = readl(SUNXI_R_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_VAL);
- writel(val, SUNXI_R_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_SEL);
-#endif
+ /*
+ * Update PIO power bias configuration by copying the hardware
+ * detected value.
+ */
+ if (IS_ENABLED(CONFIG_SUN50I_GEN_H6) ||
+ IS_ENABLED(CONFIG_SUN50I_GEN_NCAT2)) {
+ val = readl(SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_VAL);
+ writel(val, SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_SEL);
+ }
+ if (IS_ENABLED(CONFIG_SUN50I_GEN_H6)) {
+ val = readl(SUNXI_R_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_VAL);
+ writel(val, SUNXI_R_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_SEL);
+ }
return 0;
}
@@ -481,7 +487,7 @@
/* sun5i sometimes gets stuck without this */
writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
}
-#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6)
+#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6) || defined(CONFIG_SUNXI_GEN_NCAT2)
#if defined(CONFIG_MACH_SUN50I_H6)
/* WDOG is broken for some H6 rev. use the R_WDOG instead */
static const struct sunxi_wdog *wdog =
diff --git a/arch/arm/mach-sunxi/clock_sun50i_h6.c b/arch/arm/mach-sunxi/clock_sun50i_h6.c
index 7926394..767a39f 100644
--- a/arch/arm/mach-sunxi/clock_sun50i_h6.c
+++ b/arch/arm/mach-sunxi/clock_sun50i_h6.c
@@ -18,8 +18,11 @@
setbits_le32(&prcm->res_cal_ctrl, 2);
}
- clrbits_le32(&prcm->res_cal_ctrl, 1);
- setbits_le32(&prcm->res_cal_ctrl, 1);
+ if (IS_ENABLED(CONFIG_MACH_SUN50I_H616) ||
+ IS_ENABLED(CONFIG_MACH_SUN50I_H6)) {
+ clrbits_le32(&prcm->res_cal_ctrl, 1);
+ setbits_le32(&prcm->res_cal_ctrl, 1);
+ }
if (IS_ENABLED(CONFIG_MACH_SUN50I_H6)) {
/* set key field for ldo enable */