configs: meson64: add alternate USB DFU boot target
Add boot over DFU RAM as an alternate to running script at
a fixed address like done today.
The main culprit is that it's not possible to do that
on G12A/Sm1 platforms due to changes in the USB boot protocol.
With this, U-Boot will present a DFU device with a ram slot where
the Host could write a fitImage or legacy U-Boot image, then with the
detach command boot will continue trying to boot the uploaded image.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20231023-usb-dfu-boot-v1-3-df9d121c67c1@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
diff --git a/include/configs/meson64.h b/include/configs/meson64.h
index a64817e..efab9a6 100644
--- a/include/configs/meson64.h
+++ b/include/configs/meson64.h
@@ -53,6 +53,30 @@
#define BOOTENV_DEV_NAME_ROMUSB(devtypeu, devtypel, instance) \
"romusb "
+/*
+ * Fallback to "USB DFU" boot if script is not at scriptaddr
+ *
+ * DFU will expose the kernel_addr_r memory range as DFU entry,
+ * then with `dfu-util --detach`, booting the uploaded image
+ * will be attempted:
+ * $ dfu-util -a 0 -D fitImage
+ * $ dfu-util -a 0 -e
+ */
+#if CONFIG_IS_ENABLED(USB_GADGET) && CONFIG_IS_ENABLED(DFU_RAM)
+ #define BOOTENV_DEV_USB_DFU(devtypeu, devtypel, instance) \
+ "bootcmd_usbdfu=" \
+ "if test \"${boot_source}\" = \"usb\"; then " \
+ "dfu 0 ram 0 60;" \
+ "bootm ${kernel_addr_r};" \
+ "fi\0"
+
+ #define BOOTENV_DEV_NAME_USB_DFU(devtypeu, devtypel, instance) \
+ "usbdfu "
+#else
+ #define BOOTENV_DEV_USB_DFU(devtypeu, devtypel, instance)
+ #define BOOTENV_DEV_NAME_USB_DFU(devtypeu, devtypel, instance)
+#endif
+
#ifdef CONFIG_CMD_USB
#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
#else
@@ -74,6 +98,7 @@
#ifndef BOOT_TARGET_DEVICES
#define BOOT_TARGET_DEVICES(func) \
func(ROMUSB, romusb, na) \
+ func(USB_DFU, usbdfu, na) \
func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
func(MMC, mmc, 2) \
@@ -109,6 +134,7 @@
"fdtoverlay_addr_r=" FDTOVERLAY_ADDR_R "\0" \
"ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \
"fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+ "dfu_alt_info=fitimage ram " KERNEL_ADDR_R " 0x4000000 \0" \
BOOTENV
#endif