imx: imx8qm: imx8qm_mek switch to binman
Switch to use binman to pack images
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
diff --git a/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi b/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
index a95209e..eefdccf 100644
--- a/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
+++ b/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
@@ -3,6 +3,8 @@
* Copyright 2018, 2021 NXP
*/
+#include "imx8qm-u-boot.dtsi"
+
&{/imx8qm-pm} {
u-boot,dm-spl;
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index 23a7fcf..4ccbabf 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -68,6 +68,7 @@
config TARGET_IMX8QM_MEK
bool "Support i.MX8QM MEK board"
+ select BINMAN
select BOARD_LATE_INIT
select IMX8QM
select FSL_CAAM
diff --git a/board/freescale/imx8qm_mek/README b/board/freescale/imx8qm_mek/README
index 570ed7e..b1a4c6c 100644
--- a/board/freescale/imx8qm_mek/README
+++ b/board/freescale/imx8qm_mek/README
@@ -40,7 +40,7 @@
Build U-Boot
============
$ make imx8qm_mek_defconfig
-$ make flash.bin
+$ make
Flash the binary into the SD card
=================================
diff --git a/configs/imx8qm_mek_defconfig b/configs/imx8qm_mek_defconfig
index da27383..4fc8286 100644
--- a/configs/imx8qm_mek_defconfig
+++ b/configs/imx8qm_mek_defconfig
@@ -23,6 +23,8 @@
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=3