test: dm: Update GPIO tests for new gpio_request() method
Now that gpio_request() is handled by the uclass, updates the tests
accordingly.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/doc/driver-model/README.txt b/doc/driver-model/README.txt
index 8dfcf75..1ff454a 100644
--- a/doc/driver-model/README.txt
+++ b/doc/driver-model/README.txt
@@ -95,7 +95,7 @@
You should see something like this:
<...U-Boot banner...>
- Running 22 driver model tests
+ Running 26 driver model tests
Test: dm_test_autobind
Test: dm_test_autoprobe
Test: dm_test_bus_children
@@ -115,7 +115,8 @@
Device 'd-test': seq 3 is in use by 'b-test'
Device 'a-test': seq 0 is in use by 'd-test'
Test: dm_test_gpio
- sandbox_gpio: sb_gpio_get_value: error: offset 4 not reserved
+ extra-gpios: get_value: error: gpio b5 not reserved
+ Test: dm_test_gpio_anon
Test: dm_test_leak
Test: dm_test_lifecycle
Test: dm_test_operations
@@ -123,6 +124,26 @@
Test: dm_test_platdata
Test: dm_test_pre_reloc
Test: dm_test_remove
+ Test: dm_test_spi_find
+ Invalid chip select 0:0 (err=-19)
+ SF: Failed to get idcodes
+ Device 'name-emul': seq 0 is in use by 'name-emul'
+ SF: Detected M25P16 with page size 256 Bytes, erase size 64 KiB, total 2 MiB
+ Test: dm_test_spi_flash
+ 2097152 bytes written in 0 ms
+ SF: Detected M25P16 with page size 256 Bytes, erase size 64 KiB, total 2 MiB
+ SPI flash test:
+ 0 erase: 0 ticks, 65536000 KiB/s 524288.000 Mbps
+ 1 check: 0 ticks, 65536000 KiB/s 524288.000 Mbps
+ 2 write: 0 ticks, 65536000 KiB/s 524288.000 Mbps
+ 3 read: 0 ticks, 65536000 KiB/s 524288.000 Mbps
+ Test passed
+ 0 erase: 0 ticks, 65536000 KiB/s 524288.000 Mbps
+ 1 check: 0 ticks, 65536000 KiB/s 524288.000 Mbps
+ 2 write: 0 ticks, 65536000 KiB/s 524288.000 Mbps
+ 3 read: 0 ticks, 65536000 KiB/s 524288.000 Mbps
+ Test: dm_test_spi_xfer
+ SF: Detected M25P16 with page size 256 Bytes, erase size 64 KiB, total 2 MiB
Test: dm_test_uclass
Test: dm_test_uclass_before_ready
Failures: 0