spi: ti_qspi: Convert to spi-mem ops
Convert driver to use spi-mem ops in order to support accelerated MMIO
flash interface in generic way and for better performance.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index 731fb23..77fa17e 100644
--- a/drivers/spi/ti_qspi.c
+++ b/drivers/spi/ti_qspi.c
@@ -10,6 +10,7 @@
#include <asm/arch/omap.h>
#include <malloc.h>
#include <spi.h>
+#include <spi-mem.h>
#include <dm.h>
#include <asm/gpio.h>
#include <asm/omap_gpio.h>
@@ -40,7 +41,6 @@
#define QSPI_INVAL (4 << 16)
#define QSPI_RD_QUAD (7 << 16)
/* device control */
-#define QSPI_DD(m, n) (m << (3 + n*8))
#define QSPI_CKPHA(n) (1 << (2 + n*8))
#define QSPI_CSPOL(n) (1 << (1 + n*8))
#define QSPI_CKPOL(n) (1 << (n*8))
@@ -53,18 +53,11 @@
#define MEM_CS(cs) ((cs + 1) << 8)
#define MEM_CS_UNSELECT 0xfffff8ff
-#define QSPI_CMD_READ (0x3 << 0)
-#define QSPI_CMD_READ_DUAL (0x6b << 0)
-#define QSPI_CMD_READ_QUAD (0x6c << 0)
-#define QSPI_CMD_READ_FAST (0x0b << 0)
-#define QSPI_SETUP0_NUM_A_BYTES (0x3 << 8)
-#define QSPI_SETUP0_NUM_D_BYTES_NO_BITS (0x0 << 10)
-#define QSPI_SETUP0_NUM_D_BYTES_8_BITS (0x1 << 10)
#define QSPI_SETUP0_READ_NORMAL (0x0 << 12)
#define QSPI_SETUP0_READ_DUAL (0x1 << 12)
#define QSPI_SETUP0_READ_QUAD (0x3 << 12)
-#define QSPI_CMD_WRITE (0x12 << 16)
-#define QSPI_NUM_DUMMY_BITS (0x0 << 24)
+#define QSPI_SETUP0_ADDR_SHIFT (8)
+#define QSPI_SETUP0_DBITS_SHIFT (10)
/* ti qspi register set */
struct ti_qspi_regs {
@@ -96,6 +89,7 @@
/* ti qspi priv */
struct ti_qspi_priv {
void *memory_map;
+ size_t mmap_size;
uint max_hz;
u32 num_cs;
struct ti_qspi_regs *base;
@@ -171,19 +165,6 @@
return -EINVAL;
}
- /* Setup mmap flags */
- if (flags & SPI_XFER_MMAP) {
- writel(MM_SWITCH, &priv->base->memswitch);
- if (priv->ctrl_mod_mmap)
- ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap, cs, true);
- return 0;
- } else if (flags & SPI_XFER_MMAP_END) {
- writel(~MM_SWITCH, &priv->base->memswitch);
- if (priv->ctrl_mod_mmap)
- ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap, cs, false);
- return 0;
- }
-
if (bitlen == 0)
return -1;
@@ -269,9 +250,9 @@
}
/* TODO: control from sf layer to here through dm-spi */
-#if defined(CONFIG_TI_EDMA3) && !defined(CONFIG_DMA)
-void spi_flash_copy_mmap(void *data, void *offset, size_t len)
+static void ti_qspi_copy_mmap(void *data, void *offset, size_t len)
{
+#if defined(CONFIG_TI_EDMA3) && !defined(CONFIG_DMA)
unsigned int addr = (unsigned int) (data);
unsigned int edma_slot_num = 1;
@@ -286,44 +267,34 @@
/* disable edma3 clocks */
disable_edma3_clocks();
+#else
+ memcpy_fromio(data, offset, len);
+#endif
*((unsigned int *)offset) += len;
}
-#endif
-static void __ti_qspi_setup_memorymap(struct ti_qspi_priv *priv,
- struct spi_slave *slave,
- bool enable)
+static void ti_qspi_setup_mmap_read(struct ti_qspi_priv *priv, u8 opcode,
+ u8 data_nbits, u8 addr_width,
+ u8 dummy_bytes)
{
- u32 memval;
- u32 mode = slave->mode & (SPI_RX_QUAD | SPI_RX_DUAL);
+ u32 memval = opcode;
- if (!enable) {
- writel(0, &priv->base->setup0);
- return;
- }
-
- memval = QSPI_SETUP0_NUM_A_BYTES | QSPI_CMD_WRITE | QSPI_NUM_DUMMY_BITS;
-
- switch (mode) {
- case SPI_RX_QUAD:
- memval |= QSPI_CMD_READ_QUAD;
- memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
+ switch (data_nbits) {
+ case 4:
memval |= QSPI_SETUP0_READ_QUAD;
- slave->mode |= SPI_RX_QUAD;
break;
- case SPI_RX_DUAL:
- memval |= QSPI_CMD_READ_DUAL;
- memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
+ case 2:
memval |= QSPI_SETUP0_READ_DUAL;
break;
default:
- memval |= QSPI_CMD_READ;
- memval |= QSPI_SETUP0_NUM_D_BYTES_NO_BITS;
memval |= QSPI_SETUP0_READ_NORMAL;
break;
}
+ memval |= ((addr_width - 1) << QSPI_SETUP0_ADDR_SHIFT |
+ dummy_bytes << QSPI_SETUP0_DBITS_SHIFT);
+
writel(memval, &priv->base->setup0);
}
@@ -342,10 +313,39 @@
return 0;
}
+static int ti_qspi_exec_mem_op(struct spi_slave *slave,
+ const struct spi_mem_op *op)
+{
+ struct ti_qspi_priv *priv;
+ struct udevice *bus;
+
+ bus = slave->dev->parent;
+ priv = dev_get_priv(bus);
+ u32 from = 0;
+ int ret = 0;
+
+ /* Only optimize read path. */
+ if (!op->data.nbytes || op->data.dir != SPI_MEM_DATA_IN ||
+ !op->addr.nbytes || op->addr.nbytes > 4)
+ return -ENOTSUPP;
+
+ /* Address exceeds MMIO window size, fall back to regular mode. */
+ from = op->addr.val;
+ if (from + op->data.nbytes > priv->mmap_size)
+ return -ENOTSUPP;
+
+ ti_qspi_setup_mmap_read(priv, op->cmd.opcode, op->data.buswidth,
+ op->addr.nbytes, op->dummy.nbytes);
+
+ ti_qspi_copy_mmap((void *)op->data.buf.in,
+ (void *)priv->memory_map + from, op->data.nbytes);
+
+ return ret;
+}
+
static int ti_qspi_claim_bus(struct udevice *dev)
{
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
- struct spi_slave *slave = dev_get_parent_priv(dev);
struct ti_qspi_priv *priv;
struct udevice *bus;
@@ -357,7 +357,10 @@
return -EINVAL;
}
- __ti_qspi_setup_memorymap(priv, slave, true);
+ writel(MM_SWITCH, &priv->base->memswitch);
+ if (priv->ctrl_mod_mmap)
+ ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap,
+ slave_plat->cs, true);
writel(priv->dc, &priv->base->dc);
writel(0, &priv->base->cmd);
@@ -371,18 +374,22 @@
static int ti_qspi_release_bus(struct udevice *dev)
{
- struct spi_slave *slave = dev_get_parent_priv(dev);
+ struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
struct ti_qspi_priv *priv;
struct udevice *bus;
bus = dev->parent;
priv = dev_get_priv(bus);
- __ti_qspi_setup_memorymap(priv, slave, false);
+ writel(~MM_SWITCH, &priv->base->memswitch);
+ if (priv->ctrl_mod_mmap)
+ ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap,
+ slave_plat->cs, false);
writel(0, &priv->base->dc);
writel(0, &priv->base->cmd);
writel(0, &priv->base->data);
+ writel(0, &priv->base->setup0);
return 0;
}
@@ -440,12 +447,15 @@
struct ti_qspi_priv *priv = dev_get_priv(bus);
const void *blob = gd->fdt_blob;
int node = dev_of_offset(bus);
+ fdt_addr_t mmap_addr;
+ fdt_addr_t mmap_size;
priv->ctrl_mod_mmap = map_syscon_chipselects(bus);
priv->base = map_physmem(devfdt_get_addr(bus),
sizeof(struct ti_qspi_regs), MAP_NOCACHE);
- priv->memory_map = map_physmem(devfdt_get_addr_index(bus, 1), 0,
- MAP_NOCACHE);
+ mmap_addr = devfdt_get_addr_size_index(bus, 1, &mmap_size);
+ priv->memory_map = map_physmem(mmap_addr, mmap_size, MAP_NOCACHE);
+ priv->mmap_size = mmap_size;
priv->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", -1);
if (priv->max_hz < 0) {
@@ -460,15 +470,9 @@
return 0;
}
-static int ti_qspi_child_pre_probe(struct udevice *dev)
-{
- struct spi_slave *slave = dev_get_parent_priv(dev);
- struct udevice *bus = dev_get_parent(dev);
- struct ti_qspi_priv *priv = dev_get_priv(bus);
-
- slave->memory_map = priv->memory_map;
- return 0;
-}
+static const struct spi_controller_mem_ops ti_qspi_mem_ops = {
+ .exec_op = ti_qspi_exec_mem_op,
+};
static const struct dm_spi_ops ti_qspi_ops = {
.claim_bus = ti_qspi_claim_bus,
@@ -476,6 +480,7 @@
.xfer = ti_qspi_xfer,
.set_speed = ti_qspi_set_speed,
.set_mode = ti_qspi_set_mode,
+ .mem_ops = &ti_qspi_mem_ops,
};
static const struct udevice_id ti_qspi_ids[] = {
@@ -492,5 +497,4 @@
.ofdata_to_platdata = ti_qspi_ofdata_to_platdata,
.priv_auto_alloc_size = sizeof(struct ti_qspi_priv),
.probe = ti_qspi_probe,
- .child_pre_probe = ti_qspi_child_pre_probe,
};