board/BuR/common: remove BMP_DISPLAY from tseries board
Since we display in future the splash screen out of linux-os, we don't need
this support anymore within the common section.
But kwb-target is still using BMP_DISPLAY feature, so we move the related
from the common section into the target-specific.
Also the default environment of tseries will be adapted to this.
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index 240fc46..c74140b 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -30,12 +30,6 @@
"setenv stdout nc;setenv stdin nc;setenv stderr nc\0"
#define CONFIG_CMD_TIME
-#define CONFIG_VIDEO_BMP_GZIP
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (1366*767*4)
-#define CONFIG_CMD_UNZIP
-#define CONFIG_CMD_BMP
-#define CONFIG_BMP_24BMP
-#define CONFIG_BMP_32BPP
#define CONFIG_SYS_GENERIC_BOARD
diff --git a/include/configs/kwb.h b/include/configs/kwb.h
index dd30df2..7798b80 100644
--- a/include/configs/kwb.h
+++ b/include/configs/kwb.h
@@ -19,6 +19,14 @@
#define CONFIG_LCD_NOSTDOUT
#define CONFIG_SYS_WHITE_ON_BLACK
#define LCD_BPP LCD_COLOR32
+
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (1366*767*4)
+#define CONFIG_CMD_UNZIP
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_24BMP
+#define CONFIG_BMP_32BPP
+
/* Clock Defines */
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
diff --git a/include/configs/tseries.h b/include/configs/tseries.h
index c58403f..115fd5b 100644
--- a/include/configs/tseries.h
+++ b/include/configs/tseries.h
@@ -126,10 +126,6 @@
#define MMCARGS \
"dtbdev=mmc\0" \
"dtbpart=0:1\0" \
-"logo0=ext4load mmc 0:3 ${loadaddr} /PPTLogo.bmp.gz && " \
- "bmp display ${loadaddr} 0 0\0" \
-"logo1=ext4load mmc 0:1 ${loadaddr} /PPTLogo.bmp.gz && " \
- "bmp display ${loadaddr} 0 0\0" \
"mmcroot0=setenv bootargs ${optargs_rot} ${optargs} console=${console}\0" \
"mmcroot1=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
"root=/dev/mmcblk0p2 rootfstype=ext4\0" \
@@ -142,13 +138,11 @@
"setenv simplefb 0; " \
"ext4load mmc 0:2 ${loadaddr} /boot/${kernel}; " \
"run mmcroot1; bootz ${loadaddr} - ${dtbaddr};\0" \
-"defboot=run logo0 || run logo1; " \
- "ext4load mmc 0:2 ${loadaddr} /boot/PPTImage.md5 && run mmcboot1; " \
+"defboot=ext4load mmc 0:2 ${loadaddr} /boot/PPTImage.md5 && run mmcboot1; " \
"ext4load mmc 0:1 ${dtbaddr} /$dtb && run mmcboot0; " \
"run ramboot; run usbupdate;\0" \
"bootlimit=1\0" \
-"altbootcmd=run logo0 || run logo1; " \
- "run mmcboot0;\0" \
+"altbootcmd=run mmcboot0;\0" \
"upduboot=dhcp; " \
"tftp ${loadaddr} MLO && mmc write ${loadaddr} 100 100; " \
"tftp ${loadaddr} u-boot.img && mmc write ${loadaddr} 300 400;\0"