* Patch by Bernhard Kuhn, 28 Nov 2003:
  add support for Coldfire CPU
  add support for Motorola M5272C3 and M5282EVB boards
diff --git a/include/asm-m68k/u-boot.h b/include/asm-m68k/u-boot.h
new file mode 100644
index 0000000..eaf1de7
--- /dev/null
+++ b/include/asm-m68k/u-boot.h
@@ -0,0 +1,69 @@
+/*
+ * (C) Copyright 2000 - 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __U_BOOT_H__
+#define __U_BOOT_H__
+
+/*
+ * Board information passed to Linux kernel from U-Boot
+ *
+ * include/asm-ppc/u-boot.h
+ */
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+typedef struct bd_info {
+	unsigned long	bi_memstart;	/* start of DRAM memory */
+	unsigned long	bi_memsize;	/* size	 of DRAM memory in bytes */
+	unsigned long	bi_flashstart;	/* start of FLASH memory */
+	unsigned long	bi_flashsize;	/* size	 of FLASH memory */
+	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
+	unsigned long	bi_sramstart;	/* start of SRAM memory */
+	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
+	unsigned long	bi_bootflags;	/* boot / reboot flag (for LynxOS) */
+        unsigned long   bi_boot_params; /* where this board expects params */
+	unsigned long	bi_ip_addr;	/* IP Address */
+	unsigned char	bi_enetaddr[6];	/* Ethernet adress */
+	unsigned short	bi_ethspeed;	/* Ethernet speed in Mbps */
+	unsigned long	bi_intfreq;	/* Internal Freq, in MHz */
+	unsigned long	bi_busfreq;	/* Bus Freq, in MHz */
+	unsigned long	bi_baudrate;	/* Console Baudrate */
+} bd_t;
+
+#endif /* __ASSEMBLY__ */
+/* The following data structure is placed in DPRAM to allow for a
+ * minimum set of global variables during system initialization
+ * (until we have set up the memory controller so that we can use
+ * RAM).
+ *
+ * Keep it *SMALL* and remember to set CFG_INIT_DATA_SIZE > sizeof(init_data_t)
+ */
+typedef	struct	init_data {
+	unsigned long	cpu_clk;	/* VCOOUT = CPU clock in Hz!		*/
+	unsigned long	env_addr;	/* Address  of Environment struct	*/
+	unsigned long	env_valid;	/* Checksum of Environment valid?	*/
+	unsigned long	relocated;	/* Relocat. offset when running in RAM 	*/
+	unsigned long	have_console;	/* serial_init() was called		*/
+#ifdef CONFIG_LCD
+	unsigned long	lcd_base;	/* Base address of LCD frambuffer mem	*/
+#endif
+} init_data_t;
+#endif	/* __U_BOOT_H__ */