dm: Use dev_get_addr() where possible
This is a convenient way for a driver to get the hardware address of a
device, when regmap or syscon are not being used. Change existing callers
to use it as an example to others.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c
index 8f5c0fc..86ee90f 100644
--- a/drivers/spi/designware_spi.c
+++ b/drivers/spi/designware_spi.c
@@ -134,7 +134,7 @@
const void *blob = gd->fdt_blob;
int node = bus->of_offset;
- plat->regs = (struct dw_spi *)fdtdec_get_addr(blob, node, "reg");
+ plat->regs = (struct dw_spi *)dev_get_addr(bus);
/* Use 500KHz as a suitable default */
plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
diff --git a/drivers/spi/exynos_spi.c b/drivers/spi/exynos_spi.c
index 418b481..44948c3 100644
--- a/drivers/spi/exynos_spi.c
+++ b/drivers/spi/exynos_spi.c
@@ -255,7 +255,7 @@
const void *blob = gd->fdt_blob;
int node = bus->of_offset;
- plat->regs = (struct exynos_spi *)fdtdec_get_addr(blob, node, "reg");
+ plat->regs = (struct exynos_spi *)dev_get_addr(bus);
plat->periph_id = pinmux_decode_periph_id(blob, node);
if (plat->periph_id == PERIPH_ID_NONE) {
diff --git a/drivers/spi/fsl_dspi.c b/drivers/spi/fsl_dspi.c
index 3881b2e..887edd8 100644
--- a/drivers/spi/fsl_dspi.c
+++ b/drivers/spi/fsl_dspi.c
@@ -654,7 +654,7 @@
plat->num_chipselect =
fdtdec_get_int(blob, node, "num-cs", FSL_DSPI_MAX_CHIPSELECT);
- addr = fdtdec_get_addr(blob, node, "reg");
+ addr = dev_get_addr(bus);
if (addr == FDT_ADDR_T_NONE) {
debug("DSPI: Can't get base address or size\n");
return -ENOMEM;
diff --git a/drivers/spi/tegra114_spi.c b/drivers/spi/tegra114_spi.c
index d7eecd5..a965f80 100644
--- a/drivers/spi/tegra114_spi.c
+++ b/drivers/spi/tegra114_spi.c
@@ -118,7 +118,7 @@
const void *blob = gd->fdt_blob;
int node = bus->of_offset;
- plat->base = fdtdec_get_addr(blob, node, "reg");
+ plat->base = dev_get_addr(bus);
plat->periph_id = clock_decode_periph_id(blob, node);
if (plat->periph_id == PERIPH_ID_NONE) {
diff --git a/drivers/spi/tegra20_sflash.c b/drivers/spi/tegra20_sflash.c
index 82c1b84..afa0848 100644
--- a/drivers/spi/tegra20_sflash.c
+++ b/drivers/spi/tegra20_sflash.c
@@ -90,7 +90,7 @@
const void *blob = gd->fdt_blob;
int node = bus->of_offset;
- plat->base = fdtdec_get_addr(blob, node, "reg");
+ plat->base = dev_get_addr(bus);
plat->periph_id = clock_decode_periph_id(blob, node);
if (plat->periph_id == PERIPH_ID_NONE) {
diff --git a/drivers/spi/tegra20_slink.c b/drivers/spi/tegra20_slink.c
index f6fb89b..fbb665b 100644
--- a/drivers/spi/tegra20_slink.c
+++ b/drivers/spi/tegra20_slink.c
@@ -106,7 +106,7 @@
const void *blob = gd->fdt_blob;
int node = bus->of_offset;
- plat->base = fdtdec_get_addr(blob, node, "reg");
+ plat->base = dev_get_addr(bus);
plat->periph_id = clock_decode_periph_id(blob, node);
if (plat->periph_id == PERIPH_ID_NONE) {
diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c
index 7ae1f0e..310fb69 100644
--- a/drivers/spi/zynq_spi.c
+++ b/drivers/spi/zynq_spi.c
@@ -72,7 +72,7 @@
const void *blob = gd->fdt_blob;
int node = bus->of_offset;
- plat->regs = (struct zynq_spi_regs *)fdtdec_get_addr(blob, node, "reg");
+ plat->regs = (struct zynq_spi_regs *)dev_get_addr(bus);
/* FIXME: Use 250MHz as a suitable default */
plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",