m68k: add malloc memory for early malloc
To use serial uclass and DM, CONFIG_SYS_MALLOC_F must be used.
So CONFIG_SYS_GENERIC_GLOBAL_DATA has been undefined and
call to board_init_f_mem() is added for all cpu's.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Acked-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/m68k/cpu/mcf5227x/start.S b/arch/m68k/cpu/mcf5227x/start.S
index 23024f9..13c036f 100644
--- a/arch/m68k/cpu/mcf5227x/start.S
+++ b/arch/m68k/cpu/mcf5227x/start.S
@@ -372,14 +372,29 @@
move.l %d0, (%a1)
move.l %d0, (%a2)
- /* set stackpointer to end of internal ram to get some stackspace for
- the first c-code */
- move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
- clr.l %sp@-
+ /* put relocation table address to a5 */
+ move.l #__got_start, %a5
- move.l #__got_start, %a5 /* put relocation table address to a5 */
+ /* setup stack initially on top of internal static ram */
+ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
+
+ /*
+ * if configured, malloc_f arena will be reserved first,
+ * then (and always) gd struct space will be reserved
+ */
+ move.l %sp, -(%sp)
+ bsr board_init_f_alloc_reserve
+
+ /* update stack and frame-pointers */
+ move.l %d0, %sp
+ move.l %sp, %fp
+
+ /* initialize reserved area */
+ move.l %d0, -(%sp)
+ bsr board_init_f_init_reserve
bsr cpu_init_f /* run low-level CPU init code (from flash) */
+ clr.l %sp@-
bsr board_init_f /* run low-level board init code (from flash) */
/* board_init_f() does not return */
diff --git a/arch/m68k/cpu/mcf523x/start.S b/arch/m68k/cpu/mcf523x/start.S
index 1702f98..3aa4dd6 100644
--- a/arch/m68k/cpu/mcf523x/start.S
+++ b/arch/m68k/cpu/mcf523x/start.S
@@ -134,17 +134,34 @@
move.l %d0, (%a1)
move.l %d0, (%a2)
- /* set stackpointer to end of internal ram to get some stackspace for the
- first c-code */
- move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
- clr.l %sp@-
+ /* put relocation table address to a5 */
+ move.l #__got_start, %a5
- move.l #__got_start, %a5 /* put relocation table address to a5 */
+ /* setup stack initially on top of internal static ram */
+ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
+
+ /*
+ * if configured, malloc_f arena will be reserved first,
+ * then (and always) gd struct space will be reserved
+ */
+ move.l %sp, -(%sp)
+ move.l #board_init_f_alloc_reserve, %a1
+ jsr (%a1)
+
+ /* update stack and frame-pointers */
+ move.l %d0, %sp
+ move.l %sp, %fp
+
+ /* initialize reserved area */
+ move.l %d0, -(%sp)
+ move.l #board_init_f_init_reserve, %a1
+ jsr (%a1)
/* run low-level CPU init code (from flash) */
move.l #cpu_init_f, %a1
jsr (%a1)
/* run low-level board init code (from flash) */
+ clr.l %sp@-
move.l #board_init_f, %a1
jsr (%a1)
diff --git a/arch/m68k/cpu/mcf52x2/start.S b/arch/m68k/cpu/mcf52x2/start.S
index 4af691f..a048884 100644
--- a/arch/m68k/cpu/mcf52x2/start.S
+++ b/arch/m68k/cpu/mcf52x2/start.S
@@ -192,16 +192,34 @@
move.l %d0, (%a1)
move.l %d0, (%a2)
- /* set stackpointer to end of internal ram to get some stackspace for the first c-code */
- move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
- clr.l %sp@-
+ /* put relocation table address to a5 */
+ move.l #__got_start, %a5
- move.l #__got_start, %a5 /* put relocation table address to a5 */
+ /* setup stack initially on top of internal static ram */
+ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
+
+ /*
+ * if configured, malloc_f arena will be reserved first,
+ * then (and always) gd struct space will be reserved
+ */
+ move.l %sp, -(%sp)
+ move.l #board_init_f_alloc_reserve, %a1
+ jsr (%a1)
+
+ /* update stack and frame-pointers */
+ move.l %d0, %sp
+ move.l %sp, %fp
+
+ /* initialize reserved area */
+ move.l %d0, -(%sp)
+ move.l #board_init_f_init_reserve, %a1
+ jsr (%a1)
/* run low-level CPU init code (from flash) */
move.l #cpu_init_f, %a1
jsr (%a1)
/* run low-level board init code (from flash) */
+ clr.l %sp@-
move.l #board_init_f, %a1
jsr (%a1)
diff --git a/arch/m68k/cpu/mcf530x/cpu_init.c b/arch/m68k/cpu/mcf530x/cpu_init.c
index 80dc239..b09eed8 100644
--- a/arch/m68k/cpu/mcf530x/cpu_init.c
+++ b/arch/m68k/cpu/mcf530x/cpu_init.c
@@ -142,7 +142,7 @@
return 0;
}
-void uart_port_conf(void)
+void uart_port_conf(int port)
{
}
diff --git a/arch/m68k/cpu/mcf530x/start.S b/arch/m68k/cpu/mcf530x/start.S
index 097958a..ca8bb32 100644
--- a/arch/m68k/cpu/mcf530x/start.S
+++ b/arch/m68k/cpu/mcf530x/start.S
@@ -126,21 +126,32 @@
move.l %d0, (%a1)
move.l %d0, (%a2)
- /*
- * set stackpointer to internal sram end - 80
- * (global data struct size + some bytes)
- * get some stackspace for the first c-code,
- */
- move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
- clr.l %sp@-
-
/* put relocation table address to a5 */
move.l #__got_start, %a5
+ /* setup stack initially on top of internal static ram */
+ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
+
+ /*
+ * if configured, malloc_f arena will be reserved first,
+ * then (and always) gd struct space will be reserved
+ */
+ move.l %sp, -(%sp)
+ bsr board_init_f_alloc_reserve
+
+ /* update stack and frame-pointers */
+ move.l %d0, %sp
+ move.l %sp, %fp
+
+ /* initialize reserved area */
+ move.l %d0, -(%sp)
+ bsr board_init_f_init_reserve
+
/* run low-level CPU init code (from flash) */
bsr cpu_init_f
/* run low-level board init code (from flash) */
+ clr.l %sp@-
bsr board_init_f
/* board_init_f() does not return */
diff --git a/arch/m68k/cpu/mcf532x/start.S b/arch/m68k/cpu/mcf532x/start.S
index 131ad6e..f25bc54 100644
--- a/arch/m68k/cpu/mcf532x/start.S
+++ b/arch/m68k/cpu/mcf532x/start.S
@@ -148,17 +148,34 @@
move.l %d0, (%a1)
move.l %d0, (%a2)
- /* set stackpointer to end of internal ram to get some stackspace for the
- first c-code */
- move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
- clr.l %sp@-
+ /* put relocation table address to a5 */
+ move.l #__got_start, %a5
- move.l #__got_start, %a5 /* put relocation table address to a5 */
+ /* setup stack initially on top of internal static ram */
+ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
+
+ /*
+ * if configured, malloc_f arena will be reserved first,
+ * then (and always) gd struct space will be reserved
+ */
+ move.l %sp, -(%sp)
+ move.l #board_init_f_alloc_reserve, %a1
+ jsr (%a1)
+
+ /* update stack and frame-pointers */
+ move.l %d0, %sp
+ move.l %sp, %fp
+
+ /* initialize reserved area */
+ move.l %d0, -(%sp)
+ move.l #board_init_f_init_reserve, %a1
+ jsr (%a1)
/* run low-level CPU init code (from flash) */
move.l #cpu_init_f, %a1
jsr (%a1)
/* run low-level board init code (from flash) */
+ clr.l %sp@-
move.l #board_init_f, %a1
jsr (%a1)
diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S
index f50f147..ba38678 100644
--- a/arch/m68k/cpu/mcf5445x/start.S
+++ b/arch/m68k/cpu/mcf5445x/start.S
@@ -657,17 +657,34 @@
movec %d0, %RAMBAR1
#endif
- /* set stackpointer to end of internal ram to get some stackspace for
- the first c-code */
- move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
- clr.l %sp@-
+ /* put relocation table address to a5 */
+ move.l #__got_start, %a5
- move.l #__got_start, %a5 /* put relocation table address to a5 */
+ /* setup stack initially on top of internal static ram */
+ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
+
+ /*
+ * if configured, malloc_f arena will be reserved first,
+ * then (and always) gd struct space will be reserved
+ */
+ move.l %sp, -(%sp)
+ move.l #board_init_f_alloc_reserve, %a1
+ jsr (%a1)
+
+ /* update stack and frame-pointers */
+ move.l %d0, %sp
+ move.l %sp, %fp
+
+ /* initialize reserved area */
+ move.l %d0, -(%sp)
+ move.l #board_init_f_init_reserve, %a1
+ jsr (%a1)
/* run low-level CPU init code (from flash) */
move.l #cpu_init_f, %a1
jsr (%a1)
/* run low-level board init code (from flash) */
+ clr.l %sp@-
move.l #board_init_f, %a1
jsr (%a1)
diff --git a/arch/m68k/cpu/mcf547x_8x/start.S b/arch/m68k/cpu/mcf547x_8x/start.S
index 75de22d..9a87a0d 100644
--- a/arch/m68k/cpu/mcf547x_8x/start.S
+++ b/arch/m68k/cpu/mcf547x_8x/start.S
@@ -141,14 +141,29 @@
move.l %d0, (%a1)
move.l %d0, (%a2)
- /* set stackpointer to end of internal ram to get some stackspace for the
- first c-code */
- move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
- clr.l %sp@-
+ /* put relocation table address to a5 */
+ move.l #__got_start, %a5
- move.l #__got_start, %a5 /* put relocation table address to a5 */
+ /* setup stack initially on top of internal static ram */
+ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
+
+ /*
+ * if configured, malloc_f arena will be reserved first,
+ * then (and always) gd struct space will be reserved
+ */
+ move.l %sp, -(%sp)
+ bsr board_init_f_alloc_reserve
+
+ /* update stack and frame-pointers */
+ move.l %d0, %sp
+ move.l %sp, %fp
+
+ /* initialize reserved area */
+ move.l %d0, -(%sp)
+ bsr board_init_f_init_reserve
jbsr cpu_init_f /* run low-level CPU init code (from flash) */
+ clr.l %sp@-
jbsr board_init_f /* run low-level board init code (from flash) */
/* board_init_f() does not return */
diff --git a/arch/m68k/include/asm/config.h b/arch/m68k/include/asm/config.h
index e1458ac..9c4d3fb 100644
--- a/arch/m68k/include/asm/config.h
+++ b/arch/m68k/include/asm/config.h
@@ -7,8 +7,6 @@
#ifndef _ASM_CONFIG_H_
#define _ASM_CONFIG_H_
-#define CONFIG_SYS_GENERIC_GLOBAL_DATA
-
#define CONFIG_NEEDS_MANUAL_RELOC
#define CONFIG_LMB