MIPS: Add VCT board series support (Part 1/3)
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/board/micronas/vct/dcgu.c b/board/micronas/vct/dcgu.c
new file mode 100644
index 0000000..b2e86b7
--- /dev/null
+++ b/board/micronas/vct/dcgu.c
@@ -0,0 +1,258 @@
+/*
+ * (C) Copyright 2009 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ *
+ * Original Author Guenter Gebhardt
+ * Copyright (C) 2006 Micronas GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+
+#include "vct.h"
+
+int dcgu_set_clk_switch(enum dcgu_hw_module module, enum dcgu_switch setup)
+{
+ u32 enable;
+ union dcgu_clk_en1 en1;
+ union dcgu_clk_en2 en2;
+
+ switch (setup) {
+ case DCGU_SWITCH_ON:
+ enable = 1;
+ break;
+ case DCGU_SWITCH_OFF:
+ enable = 0;
+ break;
+ default:
+ printf("%s:%i:Invalid clock switch: %i\n", __FILE__, __LINE__,
+ setup);
+ return -EINVAL;
+ }
+
+ if (module == DCGU_HW_MODULE_CPU)
+ en2.reg = reg_read(DCGU_CLK_EN2(DCGU_BASE));
+ else
+ en1.reg = reg_read(DCGU_CLK_EN1(DCGU_BASE));
+
+ switch (module) {
+ case DCGU_HW_MODULE_MSMC:
+ en1.bits.en_clkmsmc = enable;
+ break;
+ case DCGU_HW_MODULE_SSI_S:
+ en1.bits.en_clkssi_s = enable;
+ break;
+ case DCGU_HW_MODULE_SSI_M:
+ en1.bits.en_clkssi_m = enable;
+ break;
+ case DCGU_HW_MODULE_SMC:
+ en1.bits.en_clksmc = enable;
+ break;
+ case DCGU_HW_MODULE_EBI:
+ en1.bits.en_clkebi = enable;
+ break;
+ case DCGU_HW_MODULE_USB_PLL:
+ en1.bits.en_usbpll = enable;
+ break;
+ case DCGU_HW_MODULE_USB_60:
+ en1.bits.en_clkusb60 = enable;
+ break;
+ case DCGU_HW_MODULE_USB_24:
+ en1.bits.en_clkusb24 = enable;
+ break;
+ case DCGU_HW_MODULE_UART_2:
+ en1.bits.en_clkuart2 = enable;
+ break;
+ case DCGU_HW_MODULE_UART_1:
+ en1.bits.en_clkuart1 = enable;
+ break;
+ case DCGU_HW_MODULE_PERI:
+ en1.bits.en_clkperi20 = enable;
+ break;
+ case DCGU_HW_MODULE_CPU:
+ en2.bits.en_clkcpu = enable;
+ break;
+ case DCGU_HW_MODULE_I2S:
+ en1.bits.en_clk_i2s_dly = enable;
+ break;
+ case DCGU_HW_MODULE_ABP_SCC:
+ en1.bits.en_clk_scc_abp = enable;
+ break;
+ case DCGU_HW_MODULE_SPDIF:
+ en1.bits.en_clk_dtv_spdo = enable;
+ break;
+ case DCGU_HW_MODULE_AD:
+ en1.bits.en_clkad = enable;
+ break;
+ case DCGU_HW_MODULE_MVD:
+ en1.bits.en_clkmvd = enable;
+ break;
+ case DCGU_HW_MODULE_TSD:
+ en1.bits.en_clktsd = enable;
+ break;
+ case DCGU_HW_MODULE_GA:
+ en1.bits.en_clkga = enable;
+ break;
+ case DCGU_HW_MODULE_DVP:
+ en1.bits.en_clkdvp = enable;
+ break;
+ case DCGU_HW_MODULE_MR2:
+ en1.bits.en_clkmr2 = enable;
+ break;
+ case DCGU_HW_MODULE_MR1:
+ en1.bits.en_clkmr1 = enable;
+ break;
+ default:
+ printf("%s:%i:Invalid hardware module: %i\n", __FILE__,
+ __LINE__, module);
+ return -EINVAL;
+ }
+
+ /*
+ * The reg_read() following the reg_write() below forces the write to
+ * be really done on the bus.
+ * Otherwise the clock may not be switched on when this API function
+ * returns, which may cause an bus error if a registers of the hardware
+ * module connected to the clock is accessed.
+ */
+ if (module == DCGU_HW_MODULE_CPU) {
+ reg_write(DCGU_CLK_EN2(DCGU_BASE), en2.reg);
+ en2.reg = reg_read(DCGU_CLK_EN2(DCGU_BASE));
+ } else {
+ reg_write(DCGU_CLK_EN1(DCGU_BASE), en1.reg);
+ en1.reg = reg_read(DCGU_CLK_EN1(DCGU_BASE));
+ }
+
+ return 0;
+}
+
+int dcgu_set_reset_switch(enum dcgu_hw_module module, enum dcgu_switch setup)
+{
+ union dcgu_reset_unit1 val;
+ u32 enable;
+
+ switch (setup) {
+ case DCGU_SWITCH_ON:
+ enable = 1;
+ break;
+ case DCGU_SWITCH_OFF:
+ enable = 0;
+ break;
+ default:
+ printf("%s:%i:Invalid reset switch: %i\n", __FILE__, __LINE__,
+ setup);
+ return -EINVAL;
+ }
+
+ val.reg = reg_read(DCGU_RESET_UNIT1(DCGU_BASE));
+ switch (module) {
+ case DCGU_HW_MODULE_MSMC:
+ val.bits.swreset_clkmsmc = enable;
+ break;
+ case DCGU_HW_MODULE_SSI_S:
+ val.bits.swreset_clkssi_s = enable;
+ break;
+ case DCGU_HW_MODULE_SSI_M:
+ val.bits.swreset_clkssi_m = enable;
+ break;
+ case DCGU_HW_MODULE_SMC:
+ val.bits.swreset_clksmc = enable;
+ break;
+ case DCGU_HW_MODULE_EBI:
+ val.bits.swreset_clkebi = enable;
+ break;
+ case DCGU_HW_MODULE_USB_60:
+ val.bits.swreset_clkusb60 = enable;
+ break;
+ case DCGU_HW_MODULE_USB_24:
+ val.bits.swreset_clkusb24 = enable;
+ break;
+ case DCGU_HW_MODULE_UART_2:
+ val.bits.swreset_clkuart2 = enable;
+ break;
+ case DCGU_HW_MODULE_UART_1:
+ val.bits.swreset_clkuart1 = enable;
+ break;
+ case DCGU_HW_MODULE_PWM:
+ val.bits.swreset_pwm = enable;
+ break;
+ case DCGU_HW_MODULE_GPT:
+ val.bits.swreset_gpt = enable;
+ break;
+ case DCGU_HW_MODULE_I2C2:
+ val.bits.swreset_i2c2 = enable;
+ break;
+ case DCGU_HW_MODULE_I2C1:
+ val.bits.swreset_i2c1 = enable;
+ break;
+ case DCGU_HW_MODULE_GPIO2:
+ val.bits.swreset_gpio2 = enable;
+ break;
+ case DCGU_HW_MODULE_GPIO1:
+ val.bits.swreset_gpio1 = enable;
+ break;
+ case DCGU_HW_MODULE_CPU:
+ val.bits.swreset_clkcpu = enable;
+ break;
+ case DCGU_HW_MODULE_I2S:
+ val.bits.swreset_clk_i2s_dly = enable;
+ break;
+ case DCGU_HW_MODULE_ABP_SCC:
+ val.bits.swreset_clk_scc_abp = enable;
+ break;
+ case DCGU_HW_MODULE_SPDIF:
+ val.bits.swreset_clk_dtv_spdo = enable;
+ break;
+ case DCGU_HW_MODULE_AD:
+ val.bits.swreset_clkad = enable;
+ break;
+ case DCGU_HW_MODULE_MVD:
+ val.bits.swreset_clkmvd = enable;
+ break;
+ case DCGU_HW_MODULE_TSD:
+ val.bits.swreset_clktsd = enable;
+ break;
+ case DCGU_HW_MODULE_TSIO:
+ val.bits.swreset_clktsio = enable;
+ break;
+ case DCGU_HW_MODULE_GA:
+ val.bits.swreset_clkga = enable;
+ break;
+ case DCGU_HW_MODULE_MPC:
+ val.bits.swreset_clkmpc = enable;
+ break;
+ case DCGU_HW_MODULE_CVE:
+ val.bits.swreset_clkcve = enable;
+ break;
+ case DCGU_HW_MODULE_DVP:
+ val.bits.swreset_clkdvp = enable;
+ break;
+ case DCGU_HW_MODULE_MR2:
+ val.bits.swreset_clkmr2 = enable;
+ break;
+ case DCGU_HW_MODULE_MR1:
+ val.bits.swreset_clkmr1 = enable;
+ break;
+ default:
+ printf("%s:%i:Invalid hardware module: %i\n", __FILE__,
+ __LINE__, module);
+ return -EINVAL;
+ }
+ reg_write(DCGU_RESET_UNIT1(DCGU_BASE), val.reg);
+
+ return 0;
+}